no good walls | Rat Rig Community [Unofficial] | Page 1

cedar vault Aug 27, 2024, 1:09 PM

#

Hello,
Had anybody of you the same problem. It’s Pla meta, printed with 220°C, and 100mm/s.
Input shape calibrated with the tools from Orca.
Hotend is Rapido with 0,4 nozzle. Extruder is Hextrudort. Printer V Core 3/400.

queen thistleBOT Aug 27, 2024, 1:09 PM

#

To help others find answers, you can mark your question as solved via Right click solution message -> Apps -> ✅ Mark Solution

wild cosmos Aug 27, 2024, 1:31 PM

#

Do you only get those ripples on one side of the print?

cedar vault Aug 27, 2024, 4:21 PM

#

#

I made two walls that he must change the layer.

wild cosmos Aug 27, 2024, 4:26 PM

#

is your issue with the wall, or the seam?

austere meadow Aug 29, 2024, 6:21 PM

#

whats your pressure advance?

cedar vault Aug 31, 2024, 7:54 AM

#

I made test from Orca and changed the value in the slicer. But I don’t know if the printer takes this value or the value in the config of the duet board.
At this moment I don’t get a connection to the printer and can’t make any more tests☹️

#no good walls