kind ruin
HI all,
I am running some initial testing of a V-Core 3.1 500 with Hemera XS with a very stiff, tight tolerance mount. XY-Joiners are 80% carbon fiber and needs some further refinement.
Gantry is carbon with a few loose bolts. I think I have some binding on the top motor mount - as both belts measure 58Hz with the gantry at the endstop.
Yet - very curious to hear any thoughts regarding these graphs.
What stands out for me is a big acceleration value, quite high frequency on X. And an Y-graph that I can't make heads or tails about with low 3_Hump values.
Much appreciated
rotund copper