I would really appreciate any help.
#Lots of vibrations in the print even after IS
violet tartan
violet tartan
this is after input shaping
below - without is, above - with is
What should i check next
What can be the cause
grizzled hearth
If you are concerned about the vertical lines it looks like belt noise to me. Have you checked the belts for correct path and not too tight?
faint shoal
What happens when you test at super low speed?
violet tartan
this sis a pa test
starts at 40mm/s and increases 20mm/s every 5mm
this is the latest result
tighted the belts acc to spectroid app
faint shoal
You might want to make sure every screw is tight
It is a pain, but it's something to rule out
Use this PA test
Way faster
The whole guide is great
verbal mesa
You have a similar issue as me at the moment.
Your lower belt is not mooving freely. thats why the second peak is missing or offset way up in the frequency