Having some trouble to get PAM working:
Internal error on command: "PAM".
I thought I followed all the steps correctly, but it must be something I'm doing wrong.
Attaching a screenshot of the dashboard and the printer.cfg in the comment section.
#PAM issues
lament mountain
We're gonna need your klippy.log
balmy halo
lament mountain
Seems like you didn't follow the steps correctly as you're missing the PAM macros.
It's right here: https://github.com/HelgeKeck/pam#2-activate
You need to include ratos_v2 in this case
balmy halo
Thanks! I'm not in front of the computer right now, but I'll look into it later today.
Would it be better to just delete all this and do a fresh install, do you think?
lament mountain
Would it be better to just delete all this and do a fresh install, do you think?
I'd try just following the installation steps first i think 😄
balmy halo
All these macros in the first link are located in the pam.cfg and ratos.cfg in the PAM-folder. Do I need to copy all of it into my printer.cfg?
When adding [include pam/ratos.cfg] to my printer.cfg, I get this error message shown in the attached photo
lament mountain
All these macros in the first link are located in the pam.cfg and ratos.cfg in t...
No you need to include pam/ratos_v2.cfg.
lament mountain
oh wait sorry @balmy halo i see you're still on RatOS v1
So it's pam/ratos_v1.cfg
lament mountain
All these macros in the first link are located in the pam.cfg and ratos.cfg in t...
This seems like you haven't included pam/pam.cfg
Oh.. pam.cfg just includes ratos.cfg
Okay.. @lilac nest i'm gonna need your help here, i'm confused.
lilac nest
reading.....
remove EVERYTHING pam related from your printer cfg, i see a huge pam config, remove all of it
then just use this
`[pam]
[gcode_macro _START_PRINT_BED_MESH]
gcode:
{% set default_profile = printer["gcode_macro RatOS"].bed_mesh_profile|default('ratos') %}
BED_MESH_CLEAR
{% if printer["gcode_macro RatOS"].calibrate_bed_mesh|lower == 'true' %}
PAM PROFILE={default_profile}
BED_MESH_PROFILE LOAD={default_profile}
{% elif printer["gcode_macro RatOS"].bed_mesh_profile is defined %}
BED_MESH_PROFILE LOAD={printer["gcode_macro RatOS"].bed_mesh_profile}
{% endif %}`
assuming you are using ratos2
balmy halo
Still on v1
lilac nest
one sec
balmy halo
so when I update to v2, I'll use this?
lilac nest
RatOS V1
`[pam]
[gcode_macro _START_PRINT_BED_MESH]
gcode:
{% if printer["gcode_macro RatOS"].calibrate_bed_mesh|lower == 'true' %}
PAM PROFILE=ratos
{% endif %}
BED_MESH_PROFILE LOAD=ratos`
you can tag me directly next time btw
balmy halo
Thanks! I'll give it a shot, at least got no errors on reboot this time 🤞🏼
So when I update to v2, I'll use the first one you posted?
lilac nest
you copied every pam related settings you could find into your printer cfg, but yu copied a lot of ratos 2.0 related stuff, thats the reason why it didnt worked
lilac nest
So when I update to v2, I'll use the first one you posted?
yes
balmy halo
Thanks a million!!
starting a test print right now
Worked great! 👍🏼
Regarding RatOs v2, I just assumed that the update Manager section would handle that automatically when the v2 was available..
But in order to do the update, I have to go through the same process as I did the first time I installed everything?
lilac nest
Regarding RatOs v2, I just assumed that the update Manager section would handle ...
for ratos 2 there will be another solution in the near future
floral agate
