fix-my-resonance
VC4-300 IDEX something off, hope it is the belt tensions
Solved
VCore 3.1 500 belt tensions seem eratic
other
input shaper
VC4 Idex Belts
other
Is it normal to have much better results at higher temperature?
Custom VC3 input shaping interpretation
VC4 Belt Issues
GENERATE_SHAPER_GRAPHS Crashes Klipper
vc4 500: What am I looking at?
vc3.1 400 impossible to align both peaks
input shaper
vc4 300 hybrid input shaper
belt tension
belts issue
VC4 500
input shaper
VC4 500 - Looks all over the place
V-Core 3.1 500 Unenclosed
input shaper
v-core 4 500 hybrid - belts tension and motors help
input shaper
VC4 500 Just to be here
input shaper
Not having any luck fixing the belt tension.
VC4 500 Not sure why my Z Tilt isn't doing any compensation for my mesh.
VC400 Hybrid belts kicking my butt and taking my lunch money
Solved
Please comment VC4-300 CoreXY and Hybrid
V-Core 3.0 500 Belt Tension
VCore4 400 CoreXY Graphs
input shaper
vc400 CoreXY Belt Tension
Solved
VC4 500mm - Can't figure out toolhead vibrations
Vcore4 500 First Belt tension
other
Vcore4 Hybrid belt tension
weird belt tension graph
Could use some guidance on the psd graphs. VC4 500
VC4 400 Hybrid Input Shaper Sanity Check
input shaper
VC4 400 Hybrid
So How should I read this....
"Oh, my V-Core 3.1 is working almost perfectly. I'll make it even better" then this
VCore 3.0 300 Belt and Resonance graphs
Peak 68hz on x and y
VC4 400Hybrid What am I looking at here?
VC3.1 300 - Chaos on the Y Axis
No matter what I do I can not get rid of the third hump
Solved
VC4 500 Hybrid - 2 close peaks on Y
input shaper
VC4 300 frequency response what can i do better?
input shaper
Y Achse Shaper sehr seltsam :/
VCore 4 400 belt issue
Weird two hump resonance graph
input shaper
Vcore 4 400
hey guys just need help
Kinda' stunned... do these still look good to you?
Solved
input shaper
vcore 4 500 belt issues....at a loss
VC4 300 frequency response
Solved
Shaper graphs have different peaks for Y and Z
VC4 300 Enclosed - Belt tension gantry alignment