fix-my-resonance
Bad Y Resonance
Vcore 3.1 500 weird z vibration
Cant get bottom belt to reach top belt. belt tension
input shaper
Just getting my v4.1 500 back together after MRW xy joiner and motor mount upgrades.
Y Graphs are constantly vibrating, But X Graphs look fine?
Resonance on a RRF Board
VC4.1 500 IDEX
input shaper
Vcore 3.1 500 125hz vibration
Fresh v core 4.1 400 idex
Vcore 4 500
input shaper
Vcore4 500 IDEX
Thoughts on this crazy graph?
Strange noises and uneven surface on VCore 500
V-Core 4 400: 3 peaks in belt tension + Y axis weirdness?
input shaper
VC4 500 IDEX Y Issues. As in Y can't I make this graph look good?
Y graph issue
input shaper
VCore 3.1 400 aluminium brackets steppers 48V
Y-Axis issues
input shaper
V-Core 3.1 wide boy (with motion system from 4) has high vibrations in y at 125 hz
input shaper
V-Core 4 400mm from CoreXY to Hybrid
Solved
input shaper
V-core 3.2H belt/resonance issues
Resonance issues😕
Uneven belt tension graph
input shaper
I think i finally fixed it 😆😆😆
Inputshaper X axis Problem
VC4 500 IDEX Y-axis having trouble
input shaper
VC4 500 IDEX IS Y-axis
Possible belt rubbing?
Possible Mechanical Issue or Binding
input shaper
Very low acceleration characteristics on V-Core 3.1 300
Any tools or advice for installing belts??
other
Y Spike on X-axis graph at 63hz
input shaper
What is happening here?????
Solved
Uneven Belt Graphs VC4 500
Belt tension VCORE4 IDEX 500mm
other
Ratrig VC4 300
Vcore4 IDEX 400 t1_y Resonance Graph Wildly Different
VC500 3.1 Long Standing Issues
input shaper
impossible to adjust
Solved
input shaper
IS Noob needs help with Y axis shaper :/
Swapped EVA -> RatRig toolhead and massive resonance spike
Need help with resonance
input shaper
V-Core 4 500 IDEX resonance
Do I just put these section in the printer.cfg file? or is there an save auto safe.
IDEX 500 Y resonance
strange noises on y (vCore4 IDEX 500)
big peak on 35hz on y axis help :/
Y axis funky, X axis perfect
My Y belt tension seems unusual
other
Struggling with Y Calibration