#general
1 messages · Page 73 of 1
I don't see why it would be an issue; but I have no experience with that. #wave-audio might be a better place to ask.
can some one slide me a 10€ amazon card per email 😭😭😭
No. And this is not the place for that.
Tssss...work for it. I only give money to people who need food or shelter...
w manz!!!
okay bro!!
Its a little late, but my fav game of 2025 was playing DND over Discord with my friends. If you mean digital game, then its using Dungeon Alchemist. Both of those, I've made shortcuts using the Stream Deck XL to streamline.
Control Center and Steam Deck software updated with the new icons. Anyone know when the Camera and Wavelink will get the new icon treatment? I saw the beta for Wavelink 3.0 but it had some unsupported hardware at this time.
Camera Hub already has an update with the new icon. Wave Link 2 isn't likely to get any more updates till 3 launches
I was wondering if anybody could help me setup my SM7DB with my Elgato XLR dock?
I havent found any guide, and i have no clue what to do with the bypass, +db on the mic, phantom power etc.
I am using wave link 3 if that matters.
I've tried youtube but no luck so far

I hope I win the giveaway, should be a great birthday gift
best of luck
Leave Phantom power off. Try starting with 55dB in the settings. You should never clip on a Wave XLR, so there is no harm in going louder beyond a sort of "compression" feeling.
Oh this is the DB. In that case, you can choose to have Phantom Power off with Bypass mode and do all amplifying on Wave XLR. Or keep Phantom power on without bypass, and just use a lower gain setting on Wave XLR.
Just try both :)
hello not sure if this is the exact channel to ask this but it is regarding the the hd60s.
I am currently using a macbook. I have the mokin extension thing that has 3 usb ports (two being 3.0) and two hdmi slots. I am trying to be able to stream using obs studio by streaming my switch screen.
I was trying to connect a monitor and the switch stuff together and tried everything and made sure all the ports and connections were in the right places, but i could never pull up the capture card on obs. The switch works fine thru the normal hdmi and displays fine on the monitor, but i couldnt pull up the screen thru my obs on my macbook and not sure why. Ive tried searching a ton of YT videos but cant seem to find this exact problem.
if anyone can help me or has experience with why i cant get obs to pull up the capture card lmk!
I just covered this on a VC with someone too.

this is so cool.
I had this crazy idea to buy the game some time ago. It sits in the cart.
I wanted to recreate Stranger Thing's campaign. lol
Thank you. As long as 40 is better to me... Had a stroke and luckily no deficits or issues but trying to climb back stronger
I hope you are feeling better from that. I’m 41, no issues yet, but take it easy.
Bonsoir tout le monde je sais pas si il y a des français sur le discord sinon je parle en anglais j'aurais aimé avoir des renseignements par exemple quand seront les nouvelles promo ?
Interesting my camera hub was 2.0 and checking for updates wasnt working had to manually download and update. I hope 3 launches soon for Wavelink!
is there any problem with Elgato XLR Dock for Stream dEck+? i see quite a while "out of stock" status
Nope, not a problem, but it was on sale for Black Friday and such so it sold out, wait for restock
hello does anyone know if the offical website will ever ship to australia
we have no way of knowing that, only the company would know about any future shipping location plans
does anyone have problems with the stream deck+ icons disappearing? and pretty much having top redo everything? this is the third time this happens. ive been keeping evrything up to date as well
can i get a discount code for Wave cast software , im gonna purchase it ,any admin peeps ,or mods even ,plzzz?? @civic falcon
No, I’m sorry.
Hello, when is the next sale likely going to be? I missed the Prompter being on sale during the holidays. Thanks!


👋
How is everyone?!

Dreading the end of Winter Break and going back to work tomorrow. Sigh. Otherwise working on some time lapse videos, laundry, and making sure I get to the Planetarium show this evening on time.
Nice! That video is going to be awesome!
I have a PSU, AIO, case, fans, these. Next is a Mobo and CPU.
🤞 Filming is the easiest, and most boring as you're just sitting there waiting.
The hard part is getting the music right.
Shiny and new things! Enjoy!
You got this!!!
💪
Not new, except the nvme, but I’d have something up and running till I upgrade those parts.
So sooner than I thought.
Ahhhhhh! Welp, have fun!
Maybe in 2 months, I can get things up and running.
You got this! 💪 😄
What? Where? 😄
I'm always learning new things. I'm happy I understand afterburner, cause now I can see the FPS stuff

All. Of. The. Frames.
yes!!! it helps me tweak my games now.
I mean, I never had Hogwarts Legacay running that good.

there were a few things to do, but it's smooth now
That's great!

Stream Deck was supposed to increase my productivity & gaming enjoyment. Since I plugged it in I've done nothing productive or gaming. I've spent too much time tweaking layout and finding ways to hack buttons for more functionality.
Haha time will come when you're happy enough with your profiles and layout that you'll just use it 😛
You'll get there! 💪
I'm enjoying it. The perfect productivity increasing procrastination promoting tool.

Does elgato still make that mobile app that lets the phone be a camera for obs?
No it doesn't, it was discontinued and End-of-Life
Oh no 🙁
Yeah, it's been End-of-Life for a year
You can't buy it anymore, but it might still work if you had bought it previously, but no support or updates anymore
I googled and there's an app called iVcam that you can still use for iPhone, Droidcam for Android
But frankly you’ll get a better image using like the Facecam MK2 or Neo since the sensor is bigger than your phone cam, requiring less light to make it look good
I mostly just wanted what amounted to a portable cam
For the occasional like room tour or something
That app was very convenient for that
I've had the app for over 3 years, used it once and was like "Ah cool it works" and then never again haha 😛
I also used to use it as a camera when doing hobby streams. Turns out the camera at the back of most smart phones was at the time better than most webcams that could be had for reasonable prices lol
so I would point it down at the mini I was painting
<@&581565551495741448> ☝️

Can someone help me understand why I lose a decent amount of fps while using wave link 3.0? .-.
<@&581565551495741448>
@frozen obsidian Please do not advertise in this discord.
can someone help me because i have everything for my elgato connected and it says "no capture device found" ive tried everything feels like!!
ty!
QotD answer: My Father in Law got me Clair Obscur with much help and input from me and my wife. I am absolutely loving it, though it seems I may have to restart after 16 hours as I missed a very important pictos. Oof.
Has anyone run into an issue where enabling Secure Boot causes an Elgato Stream Deck to not power on? Once secure boot disabled streamdeck works perfectly.
I'm here to win the giveaway! skskskskks
Voice focus is free on the mic channel in wave link with any Elgato wave device.
Wave xlr is a wave device.
But voice focus works on the wave xlr channel. As I said.
Adding a third party mic to wavelink doesn’t get voice focus for free.
The plugin version can be used on any channel, in any app.
so i would have to purchase it
Words chosen carefully above.
☝️
Hello everbody, i need help on #marketplace please 🫶
Cool emoji
I love emojis 
Soooo who won the last give away? Don’t see an announcement for it
the announcement is right above the most recent giveaway post
An American TT is available for sale urgently.
Not the server for that.
Hi, the partner is open?
No, keep your eye on #elgato-partnership
AND THE TEAM IS BACK!! 
Back from the holidays!
Hope you all had an amazing holidays! 
Yaaaaay Jasmine 
Quite good, had a lovely week in Stockholm with my mom, celebrating Christmas, lots of good food :3
and you?
Welcome back!!!
I miss having reacts btw :<
Same.
That's awesome!! Omg what kind of food 👀
I had an amazing almost 2 week holiday break! Time flew by FAST! First time I had a break this long hahaha, so it felt so nice to relax!!
Spent my 11 days eating delicious food, going on dates with my so, spending time with family, and traveling!
Thank you!! 
We made christmas ham, meatballs, prince sausages, traditional rice gruel, potato gratin, smoked reindeer and lots of other things, was delicious ❤️

^my react

Welcome Back!
Thank you! How was your holidays?
Hope you had a great one Vic!
Dang, So many beautiful people in this channel!!! 

The announcement says 2026 when it should say 2025...
- Share THREE of your favorite moments from 2026. This can your achievements, memories, setup upgrades, etc. Bonus points if you're able to share photos/videos of these moments.
- What's your New Year's Resolution?
Hi Jasmine!
Says no access to the #new-years-contest
2025 is correct! We want to learn about your achievements from 2025 and THEN New Year's Resolution!
1000% rigged af.
Oh weird one moment
It says Share THREE of your favorite moments from 2026. though, it should be 2025
Yeah that sounds a bit weird
Time to speedrun three achievements
shes a time travler and thats how elgato get such good products
But anyways welcome back Elgato team
Was about to say the same thing haha
somethings wrong,. wdym share 3 favorite moments from.. this year... 2026?
omg lemme change that haha
🤣
Guys this new giveaway the thread says no access
good morning :)
Sorry for the confusion, it's been edited 
Good morning!
Looks good now!
I can see that and also welcome back
Can I put Jasmine noticing me as one of my three? xD
Thank you! :D
LOL no (unless you actually mean it then sure
)
Fixed! Sorry about that!
You should see it now!
All good 🙂
❤️
Thanks everyone! Feel free to let me know if there's any other issues! 
I hope I get a stream deck + on my birthday
glgl!
But I got a Micro:bit
usually i mess up with new years to write down the correct year, definitely wasnt on my bingo card that someone does it the wrong way around :3
Moreso staff in general continuing to show that they care about the community, interact with us, and actually listen to feedback. You just seem to be the face for a lot of community interaction so you get the blame credit.
bwahaha brain is already on 2026. NEW YEAR NEW ME. 

I must behind then because I’m still thinking 2025 when it’s already a few days into the new year 😶
Meanwhile my brain is stuck in perpetual 2006-2008 
Good luck in all the giveaways everyone! 
We're excited to read everyone's entries in #contest-entries !
do you have to put your real name to sign up for the newsletter giveaway?
Do we do the business or creator one for newsletter?
All done thanks had to cover my child's face though in the pics.
I relaxed, and spent time with my Family for a bit. I rested up. How was yours?!
Why its saying No Capture devices found but everything plugg in right
Nope! But we will need your real name if you were to win for shipment purposes.
Either or!
That's awesome! Mine was great ty! Spent a lot of time with family, my bf, friends, eating yummy food, and traveling!
I'd recommend contacting Elgato Support via email or phone for official support/help: #official-tech-support
You can also post your Elgato Capture Card support questions in #capture-cards in case our community members are free to help.
Jasmine im looking at the downloads page on Elgato.com (no I’m not going to download anything) but I noticed that neither 4K S or 4K X is under the compatible with on 4KCU
Why is that?
I think it’s cuz those cards (4K X and S) released after 4KCU went EOL
hello all i hope you having a great day and happy 2026
can someone help me i just bought and elgato hd60pro, i cannot stream to either twitch or youtube, nothing works

That would go into #capture-cards
4K X is compatible wtih 4K Capture Utility, but you're correct that 4K S is not, and the app hasn't been updated since that released since they moved on to Studio.
Well if 4k x is compatible with 4KCU why isn’t it listed in the downloads thingy
Oversight probably. It added 4K X support in 1.7.11 when the card launched https://help.elgato.com/hc/en-us/articles/23749168389517-Elgato-4K-Capture-Utility-1-7-11-Release-Notes
That said I would generally recommend Studio with it - newer firmware since 4KCU is discontinued.
So unrelated question but is there a new firmware update for the MK 2?
I can’t check cuz it’s 01:20 Sweden time
4K60 Pro Mk2? No, the last firmware update to that was in 2022
Should’ve mentioned Stream deck
I forgot
oh. 1.02 is current. Hasn't been updated in a while afaik
The decks don't often see firmware updates since most of what they do is controlled by the host app
True
Hi! Is there a way for someone to check if I'm already subscribed to the newsletter? I'm pretty sure I should be from when I created the account, as i'm not receiving any emails to confirm subscription after following the link from #giveaways
I got an email but took awhile to get it in email
still nothing 😐
you check ur junk folder too?
Have a Amazing Taco Tues FAM!! 🌮
🌮
I kind of wish they put it on the other side of the keyboard it almost becomes pointless on that side
I'd love a full size keyboard version of that.
I rather have the stream deck part by its self so I can put it where I want too
Yep , nothing... even tried a different email address last night
This is not a marketplace to trade, buy or sell stuff. Take that on facebook or ebay.
My bad wrong place it was sent and you don’t need to be rude
I wasn't rude at all?
Clearly it was you could’ve just tell me not to send such stuff you don’t need to go all out and be rude I’m not 12
he wasnt rude at all
That sounded rude to me or it was the way he said it
Can you create a ticket via #contact-moderators and provide us your email? 
🐛
I really wish it had a numpad :/
Keybinds
that new keyboard looks sick- would be perfect for star citizen
no need tho
It's a Stream Deck-, half a Stream Deck+ ^^
I would use it for switching scenes and also hiding and showing sources
i wish the keys are a top row or something over removing the num pad
i have a keyboard with g keys it is a stream deck
I mean, im still getting it, but it would be good for games where you need those extra keys for keybinds. Not to mention, flying in GTA requires numpad if you dont want to use the mouse or have a controller.
£310 🤣
I realize how that sounds on keys that are programmable but the numpad is a necessity for me sometimes especially with work
#question-of-the-day if I had the Stream Deck Keyboard, I'd use it for one of my PC's (2nd build coming soon) and streamline it for my Gaming Rig to make launching games, voice chat, and music very streamlined. If I used it on my workflow PC, I'd use it for streaming, recording, editing, and content creation tools.
Keyboard looks cool. Only complaint I'd have is I'd want the Stream Deck stuff on the left, not right. Part of the benefit of TKL is no numpad taking up mouse space when right handed.
Having stream deck keys on my keyboard and not having to reach over to my stream deck that's off to the side to switch scenes/adjust volume while I'm streaming would be a game changer tbh
ok that new keyboard from corsair is kinda dope ngl!
fr
Honestly, i dont think id buy one. Im using a corsair k55 and it more or less already has a streamdeck built in (well macro's that use the elgato SD software to program)
I’ve got the original stream deck. Is it possible to get those performance widgets they showed of on the Corsair kb? I’ve tried finding something like it before but these look better than what I’ve got
The good thing is that you can just set up a profile for the stream deck section that gives you back those numpad keys
That keyboard is fire!!!
Stick the deck on the left and gimmie a numberpad and I'm in.
I really love the new keyboard that you guys and Corsair have just dropped! Although I won’t even think about getting it just yet because I cannot justify £310 right now…
Give me a few months of saving, and you’ll see it in the newly renovated office/gaming room 👀😏
the ones that say cpu and gpu temp?
it's on back-order anyways no big rush 😛
Yeah and vram and stuff. Where can I find them?? I have some already but they’re really bad. These look nicer
it's just the HWiNFO plugin, you can use it on any of the Stream Deccks
I believe the one featured is System Vitals by Vivre Motion which you can find on Marketplace
Ohh, well, they look similar
Thank you guys!! I’ll check it out
nw!
what's funny is in the promo pics star citizen doesn't use the power triangle anymore so idk how effective it's gunna be with engineering- then again i can just choose a different plugin and resolve that completely
Wait why is the stream deck keypad on the right of that keyboard, so using it means putting your mouse hand on the keyboard every time you need the stream deck rather than having the stream deck on the left where you can easily reach the stream deck keys from where your keyboard hand rests on WASD
also horrible for editing when you wanna have all your shortcuts on a streamdeck and use a mouse, works great with a regular stream deck and mouse but with the stream deck keyboard it puts the stream deck keys next to your mouse even though a mouse is almost indispensible for editing
Is there one with a number pad?
oh yeah there isn't even a num pad for 350 quid :(
You can buy standalone numpad, keep it to the right of the mousepad like a pro accountant ^^
kinda defeats the point of an all in one keyboard thingy tho imo
if I kept it to the right of my mouse pad i would need go go gadget arms to reach it lol
I meant right of the space you use for the mouse, not end of deskmat 😛
I kind of wish they sell just the stream deck part of that though
A Stream Deck- ^__^
we could build are ultimate stream deck desk then
Can’t you just make a page for a num pad?? I mean that’s the only real thing I’ve seen people complain about… You literally have programmable buttons so what’s the issue?
You can just use the Stream Deck as your numpad when you want to use it like that
If it isn't waterproof, pass - I destroyed my K95 RGB plat, I'll keep my expensive stream deck slightly off to the side, where it belongs.
Set up a numpad profile on the Stream Deck section using Hotkeys
Swap to it when you need the numpad buttons and swap to a different profile when you don't
personally I also find the location on the right far less convenient than on the left of the keyboard
Yep you can, I have a folder on my XL that is numpad and also some used macros and hotkeys 🙂
#announcements message if I had the keyboard that already has a stream deck integrated into it like this, I would love using it for streaming and replacing my current Lenovo branded keyboard for it. One of my concerns with the stream deck initially was not being sure where I would realistically be able to put such a device on my desk space, but if it is integrated into the keyboard, I wouldn't have to worry as much. In its current design it looks like it'll be useful for right handed people since most of the controls are on that side for the Stream Deck portion.
holy crap the new keyboard looks awesome !!!
that new keyboard looks amazing, id use it for macros or shortcut keys for art programs
Honestly I’m just gonna 3D print a mount to put my OG stream deck onto my keychron kb
I dont know if I would spend that much on that keyboard though
that's honestly the smartest option imo
I feel like I'd say I'd do this for art prograns but then knowing myself like I already have with my tablet, I'll default to normal keybinds. Might be vastly different for vtubing toggles probably
Having used the keyboard for a bit now it's honestly really great for productivity and gaming for me
Especially combined with something like the Scimitar for MMOs
sweet you got to test it out
wish the scimitar would work better though
I haven't had much trouble with it
Set profiles up in Stream Deck and off you go
Yeah it's been a lot of fun! The dial system is great too
hi
nice!!!
Corsair Insider vibes
@oblique mica did you get lucky too?
yeah wish it was that easy
Maybe!
hi, I'm new and why can't I access giveaway channel
😂
That keyboard looks amazing (would be prettier in White 😉 imo)
I would use it in the same way I'm using my SD+ right now... So switching scenes for streaming, mute/unmute Discord VC and probably my drumroll command (I guess)
Drop by Channels & Roles.
That keyboard... I would travel with that thing. Like, literally... I wouldn't pack it in a bag and bring it with. I would travel. Chef's kiss guys, that thing is slick.
Could be you need to be a member for a certain period of time. Did you see Browse Channels?
Weird.
looks sick
#announcements message
i have it on
so basicly enable all channels
press the name of server
and check enable all channesl
yes i have it
Yeah, embeds are turned off.
You can't access giveaways channel because you clicked on this role which is meant to filter out bots from joining the server. 
I'll go ahead and manually remove that role from you so you can see the giveaways channel!
You should have access to the giveaways channel now!
If not, I recommend CTLR + R to refresh your Discord client
button that says dont click of course we going to click it lol
Forbidden Button 
Sometimes language barrier!
I click everything

Interesting keyboard... not sure I love losing my numberpad but I'm thinking i'm in the minority there
You can just use the Stream Deck section as a numpad via hotkeys
It's an indirect reading test.
gotta use your eyes and read so you are able to do fun things. 😉

That keyboard is a stunner, but I wish it had one more row and column of Streamdeck Buttons, and a place where you could gesture to switch it to a numpad on command. By all means let it replace the standard numpad, but it should have the ability to switch over if you need it.
You can totally set that up with a Stream Deck profile
for sure, but you would not have number function keys /*-+
just that extra row/column would make it perfection
It's a slightly different layout than a regular numpad but you can definitely get the full functionality back
I have a numpad profile I setup for it during my testing since I also occasionally need it when using a full size keyboard
#announcements message does it feature the scissor keys already or still the "old" ones? I wish they would have made the SD part feature all the regular numpad layout, so you could use it as one if you need to. Right now its missing the outer rows, which are really needed for fast calculations. I kinda like the idea though... Sadly some rather interesting information is hidden under the FAQ section, like what switches are used (hot-swappable Corsair MLX Pulse), no customizable trigger actuation etc...
you could get 0-9 and 2 keys, it would be hard to get full function, but i still think its an incredible feat
Yeah you can get close to almost full functionality and then I'm using key logic for things like enter and my /*-+
hello all hope everyone is havinga great week so far
It slows down ever so slightly but I don't tend to use / and * that often so I have those on a hold "underneath" my - and +
I was thinking about that it would be better than nothing but it's a few keys short to do that still
another 4 or so and you could get "close enough" for sure
The way I have my profile set up I have full functionality, it just requires a couple hold actions occasionally
love the idea of using key logic for /*, completely slipped my mind you could have it as a hold or double press
it shouldn't be illegal to marry keyboards
Not perfect if you need those more often than I do, but it brings back the full key spread if you need it
And then you have the 4 dial actions to play with on top of that
Definitely requires some problem solving but a lot is possible
the fact that key logic is there though is a huge boon
That new keyboard in #announcements looks nice. As someone who has a desk setup that's trying to minimize wires and clutter it would be a big boon to space saving
I could see that device being useful for a semi-portable streaming setup, such as the keyboard in the kitchen during a cooking stream
The new kb looks nice but I'd hit my mouse on that so often lol
Why would the streamdeck feature of the keyboard, be on the right end, and not the left, close to WSAD?
I guess you could take your hand off the mouse
Fyi, Elgato Team, there's a typo on the new webpage:
Stream Deck is integrated with virtually *every(?) popular service across creating, playing, and performing.
Oh and the preorder link for the 100SD on the same page is broken but I assume that's because you can't preorder yet haha nope just broken
as its corsair I wont touch it
Anyone had super slow holiday deliveries? Ordered a bundle 3 weeks ago - half of it arrived in a few days after ordering - the other half is still not here.
Support keeps saying it will ship "next week", each week.
some items are likely out of stock and shipping across the world is severely delayed in general
Yeah, normally I’m cool with waiting, but the bundle shipping is weird. Once the first half arrives, the whole order gets marked 'delivered' and the tracking disappears with no indication you are waiting for anything - it’s amazing what a little extra tracking can do to ease the mind 😅
You should bring that up to support, that adding an order for partial deliveries should happen 🙂 This discord is purely communityhelp though so nothing we can assist with
For sure - was just curious if anyone was having the same 🙂
I've been waiting on a pair of headphones for 3 weeks from another company xD the postal service here is swamped with packages that they're stuck at the center and can't go out to couriers because they have too many packages so they can't accept more until people pick them up 😛
I wonder if the stream deck keys on the Corsair Galleon 100SD are membrane or scissors
Based on the rounded corners, my guess is membrane
Scissors have sharper corners
Assuming that's not just a design language choice
Update: Jasmine just confirmed they're regular membrane keys
And I also wonder how it would look in stream deck
is there a price tag on it? preorder button does not seem to live up to its purpose 
Hi
Howdy!
Sup
18 minutes left until I can go play in traffic.
#announcements i would use it for streaming
I can’t wait
#announcements I will. Be using for my YouTube channel
I would be cool if I can do test for the new keyboard
The price is $350 according to the website
What’s everyone up to?
@true crystal please do not advertise or promote in this discord.
No worries. You can post when you're live in #live-now . That is the only promoting allowed. 
The new streamdeck keyboard is nice, Suggestion for future, create a 75% one with Function keys like normal over numbers and add the stream deck macros across the top in a line.
Yaaaay Envy haaaaai 
I giggled at the name because in my fav mobile game there is a very popular character called Galleon lol
Ochaaaaaa
haiii
How are you doing? :3
still a bit sick but otherwise doing fine and you? :3
Feeling AMAZING! ^__^
It’s literally 01:41 Sweden time
I don't really sleep, ever
Constant backpain due to a motocross accident
So you can’t sleep cuz of the pain

Vic hi!

hope you're doing good!
how ya going!
yes, and I hope all is going well.
BTW whos' playing Pokemon Z-A via a X-mas gift? Did you like the new vibe?
Have you tried Ranked Battles?
Ooof seems excessive
Does wavelink 3 crash for anyone else when trying to open the settings?
I haven't had it crash in a couple months
damn lol i cant figure this out for the life of me
Guys I managed to get the dreamscape green arm on order. Can't wait to have it
My first elgato product but ive been following for years
I really don't get that new drop, people want compact setup with room to glide their mouse and here they come with a TKL with a (very cool) big SD integration on the side which makes it full keyboard layout sized.
Would've been much more excited to have a standalone product that can be placed wherever we want.
It would be nice to have it as a standalone module given as I love its design, but eh I think it makes sense. Corsair does love their full keyboard layouts
Aslong as it sells they wont stop making what has demand
I can see there is a audience somewhere
I do like the layout of this SD too. But why not a 75 layout, it would've been much more compact.
Maybe for like a gen 2 you could have the SD bit magnetically attached, and you could move it to the left or right
It really feel gimmicky to me. Just like a meme.
Like the old ROG one, yeah.
Having it on the left would actually be a killer feature for me, since I use my K95's macro keys with their Stream Deck functionality as is. Really useful for a quick mute/unmute toggle
That is a nifty idea, but agree it looks like it would be too big. Then agian, for me personally, I could never go back to regular KB for any reason.
I guess that I'm somewhat in the minority here in that I actually do use the numpad regularly lmao
Me too i just can't i really treasure the space on my desk
Really tho. Like, they were really attached to their bar of hotkey on the left and most people want the right side of their keyboard the shortest, would've been the perfect idea.
Only people that are in finance and maybe on 3D software use numpad these days.
Yep. Mine is split as well so compact and hands where ever I'm comfortable, lol
Yep indeed im planning to buy a numpad separately for the 3D stuff my partner wants to do so I can store it away when not used
We got a release date on when wave 3 link drops?
Eventually™
Putting that SD on the left with a 75 layout would've been perfect.
I use num keys all the time when I'm doing data entry. I just have them on a layer, so not traditional.
I mean it's pretty much stable at that point. I'm using it everyday with no big issues.
Could be using it now. I have no issues at all.
For me they didn't really think that trough. Lots of lost potential like the xeneon edge, which still doesn't connect with my iCue for some reason.
Idk beta versions are beta versions 🤣
And it has some great new features and some that got lost. Beta things.
True, you are taking your chaces. I work from home and worried about the virtual desktop I have to use, but nope all good and I don't lose my mic at work anymore at all.
Used to be a huge problem with that.
Hope they come out with Stream Deck plus 2 now 🙂
If they come out with like an actual physical mixer that would be p cool
I personally prefer the software. I have very linited space, lol
We all have our things though. What makes the world so great 😉
I’ll have to pick up a new wave mic arm cus the original one I had basically carked itself I ended up buying the wave desk stand to replace it but idk I’m eyeing the low profile pro boom arm
The software is great but having the control of your whole pc at your finger tip without alt tabing out of what you're doing is just worth the space and money. 💯
I own a stream deck plus and original stream deck but maybe it’s just me and I’m dumb to actually justify a use case for it
Same with the wave xlr
The hd60s has come in handy for capturing my other pcs
Instead of a console haha
I can imagine it would be. Have no doubts, I have thought about it pretty hard in the past. Maybe someday, but for now, it is what it is 🤷♀️
I had the old lp arm it broke, elgato took it back and refunded. I bought the pro version, best decision ever.
It's a really powerfull device, but you got to know how to use it and have a real use of it.
My old mic arm like it doesn’t hold the arm in place goes straight up I’ve tightened with the Allen key etc
Makes all this creaky noises and things haha
Tried lubing it up with wd-40 but yeah
Yep, that was the other half of the reason I did not go that route. I didn't feel I was at a point I needed something that complicated, lol
Then like you plonk a mic onto it and doesn’t hold it in place etc maybe the newer versions are just that better
Been meaning to throw it out
The pro arm costs $300 Australian 😭
I feel you. The lp pro is just night and day, in term of usability as well as built quality.
The Lp tho costs $149
The basic lp is garbage I'm not gonna lie to you.
That must be a lot of unscrewing.
Well I think I brought them all as an impulse purchase ngl 🤣
You can record in full suround sound
My most expensive is a rode podmic usb haha
I own that a wave 3 a blue yeti and and a atr 2100x
I've got the old podmic, it's a solid mic for around a 100€
Not the best nor the worst. It does the job.
I like I brought a wave xlr tho
Had a focusrite and yeah wasn’t good enough
Tho I’m annoyed because I mix all my usb-c cables so I never know what the original one had
That's a solid device, but yeah those cables are making me crazy too. With all those devices, it's getting out of hands.
I get annoyed because I don’t know what cable length I had originally with each device
Just paranoid 🤣
I've bought the usb hub for the SD +, so it got a little less messy, because I was not about to reach all the way behind my pc to tweak those cables.
Some cables are just too short out of the box, like that webcam I bought from the green brand, thankfully it reach said hub because it was so far from reaching my computer which is on my desk, desk which is only 140cm (that's short).
Max cable length for USB3 is 2 meters for uncompressed video, Facecam can run at USB2 speeds also but compressed MPEG at up to 4 meters but preferably 3 meters or less to not have powerissues if you want to upgrade to a better camera with detachable cable 😉
hi is there away to get rid of burnin on a stream deck?

Good morning, Vic!
Good Morning!
You've had issues with burn in images on the buttons?
Also good morning!
yeah it happned today on my streamdeck plus after a power outage and i noticed the images looekd abit off so i tired changing the brightness then changed the image and saw it was brunt in
luckily i hada spare stream deck plus laying around that was never used to i swapped it out for now as ive heard to try leaving it alone for a day and see if it fixeds it
Ohhh, maybe due to the power surge. Do you have everything plugged into a surge protector?
yeah
i figred the power surge caused the issue
the stream deck plus works fine but it was jsut the image burn in issue so yeah i diconnected my stream deck plus and using my spare one but will check the other stream deck ina couple days and hope it fixes the issue
Fully disconnect it and let it discharge. Give it quite a bit of time.
Then see if it’s clear when you power up again.
They have a screen saver feature. and go to sleep, (if you’re able to get sleep state working well on your computer)
So shouldn’t happen normally, but worry about that surge
got it thanks the advise
Trying to remember what I’ve seen Arcsane advise about time. Maybe 20 or 30 minutes? Hopefully that’s overkill.
But this has come up before; I know I’ve seen it mentioned
yeah I recall maybe about 30 mins
i was on a kill streak in Quick shot until my wired internet (from my phone) gave up
Bro
Please do not tag staff
Tell me you joined the Elgato discord just to complain about the price of a product made by Corsair….
not needed. They are allowed to express their concerns.
totally understandable
In the annoucement is the Info to give a answer in „generals“. To wich one i should give a answer then?
you can post here, just dont' tag staff/admins
You are welcome to talk about it here. Its do not tag staff and admins
it's ok to voice feedback.
heck if you have an ideal solution, you never know who's watching
I can not change my Feedback to delete my @ because someone deleted it. Sorry for my english, i am not a nativ speaker. But give me a Chance to change before you delet it. That‘s a normal feedback.
you can repost it here just dont' @ any staff/admins.
I couldn't care less who manufactures it, but I find the price outrageously expensive, and as an Elgato customer who uses their products myself, I'm entitled to say so. How else is a company supposed to get customer feedback? If everyone pays what a company demands, prices will only keep rising, since customers will pay everything without complaint. And €350 for a keyboard is simply outrageous in my eyes. You might have a different view because you're perhaps better off financially and have your own opinion, but I'm also entitled to my opinion and don't have to go with the flow.
I simply think €350 is too expensive for a keyboard, whether it's from Corsair or anyone else. I like the idea and I would buy the product myself, but not at that price. €150 or €170 would be okay, but not €350. That's my personal opinion and feedback. You don't have to agree, and that's perfectly fine.
but the galleon 100sd has a stream deck built in
I think this config of stream deck doesn’t exist. But we could guess.
15 key is $150
Sd+ is $200
So the combo between these two would be somewhere in there.
Now include a whole keyboard.
but the keyboard got a 4x3 layout
Yup, plus a screen and two dials
We don’t have a stand alone example. But if it was for sale I would guess 150 to 200.
did you say 1 fiddy
Point is, if the price target for a product that includes this plus a whole keyboard….
Yeah, it’s not going to cost 150 to 170
we dont know if its a touch screen or just a regular screen
the dials look exactly like the dials on Stream Deck +
Thanks for the price list. I just think the price is too high. The Stream Deck+ costs less and offers more features, and just because it has a keyboard attached, or vice versa, doesn't justify this high price in my opinion.
You keep comparing to things that are only part of this product. If you compare to keyboards, they don’t have decks and if you compare to decks, they don’t have keyboards.
It’s not a product I would buy either, but it’s not because I think the price is unreasonable for the hardware and software features provided.
Consider what’s being included and make some estimations. They are right in the zone I would expect for a price target based on the component products that are available and we have prices for.
It is not touch screen.
I would actually prefer a mouse with a control panel in front of the finger buttons that you can reach with your index or middle finger. I know there's this new Corsair mouse; I tried it and found it impractical because I hold my mouse with a lot of thumb pressure and constantly press the buttons. So I returned it.
You can view the full product specs can be seen here on the Galleon webpage https://www.corsair.com/ww/en/p/keyboards/ch-912a31i-na/galleon-100-sd-stream-deck-integrated-mechanical-keyboard-ch-912a31i
Ok, what I actually think it would be great for is media creation studio.
In my studio I use a trackball instead of a mouse, so I don’t need desk space for movement (not gaming)
I bet I could make use of the dials in scrubbing and stuff.
Currently stream deck in my studio doesn’t have dials.
(There’s an actual contribution)
I've been loving it for both media creation and gaming alike tbh
I find them challening to use. lol
Kensington expert mouse. I’ve had it for over 15 years. I wouldn’t buy anything else for studio work, haha!
unless color grading
For gaming I don't like them, but for everything else they're the best.
Mine is grey; that’s how old
I popped the ball out once just to fidget
lol
Yeah I’m editing and recording only in here
No, I'm comparing it to a Streamdeck+, which offers the same features but costs less. The only difference is that it has a keyboard attached. We're talking about our keyboard, which is just basic technology and plastic, not high-quality electronics like a processor or a mobile phone. Sorry for being so blunt, it's just a keyboard attached to a smaller Streamdeck+.
Show me the costs of a Corsair keyboard with these features.
Just the keyboard.
I think you have a misconception about the range of keyboard construction, features, and cost.
Guess we're finding out tonight im going to win a very very nice 40th birthday gift.... Come on baby
Happy Birthday!!! Also welcome to the 40+ club!!

Happy Birthday an welcome to 40+
Congrats on the 40!
As for keyboards, those are notorious for getting very expensive very quickly in the higher end. Whether it's worth it is a personal question, but it's certainly not without precedent
Hell, the concept keyboard that eventually turned into the Stream Deck retailed for well over $1000
As a keyboard nerd the Galleon feels really nice
Does this mean there's somewhere that I can buy one?
The prelubed linear switches are actually very solid and the sound is really nice for a retail board
Don't forget the concept of the Stream Deck Desk... I mean reality of it. I'm sure that's very costly...

how many decks where in there
Probably on the secondhand market if you can find one. It was a commercial and critical flop at the time, so not many were made
ah rip
Apparently it was abysmal to type on lol
is is quiet? I am looking for a quiet one
I am planning to open it up to check out the mounting and if they're adding any foam by default
I can record a typing test later but it's fairly quiet by default due to the linear switches
sweet
oh, does the keyboard enable virtual Stream Deck?
For this? I'd imagine so
My only real "issue" with the typing feel is the space bar and that's mostly because I'm not used to a standard full length space bar (I have a split space bar on my main board)
Also yeah I'd imagine it would since it counts as a hardware device in Stream Deck software
I wonder if someone from staff knows.
I am not tagging anyone, but hopefully they see this
nudges Shady

IIRC the criteria for unlocking VSDs is a little haphazard outside of supported Elgato hardware
it's got me thinking in case I really wanted to consolidate on my deskspace to as minimalistic as possible
For new Stream Deck compatible hardware? I don't doubt for a second that it'd be compatible
I'm talking about older products like the K95 integration or the SCUF controller
yeah, I have g-keys and they don't
But yeah, for the Galleon I'd be genuinely surprised if it doesn't unlock VSDs
Guess we can ask when the Twitch stream starts lol
that's my only 2 questions VSD and a Giveaway. lol
It'd be nice to win one. I don't really need it, especially after winning my SD+ last year, but my K95's light bar has incredibly inconsistent colors and having something newer would be nice
First world problems, I know :3
true
ok, I have to go back to work. See y'all later

Cya!
I really wished the wavelink would work on win10
Wave Link 2 does
For 3, though, they rewrote everything and used newer tech only present in 11
<@&581565551495741448>
Make sense.
Even under Windows 11, it doesn't work properly. You have to install it in a complicated way, and you have to delete everything beforehand. Elgato would do themselves a favor by releasing proper installation instructions for the beta. To get everything to work at all, you have to restart several times and pay attention to a few things. I still haven't managed to get it working properly. And even with the Streamdeck+, I can't get WaveLink 2 to work correctly. As soon as I restart my system, WaveLink tells me I don't have a compatible device. Maybe I'm doing something wrong, so instructions from Elgato would be really helpful. If anyone has any tips, please share them.
Win 10 isn't supported by Microsoft anymore. And Wave Link 3.0 is using protocols only available on Win 11.
The install is pretty straight forward, you just have to make sure you've uninstall Wave Link 2.0 beforehand.
Yes i know. But nothing work. I uninstall WL2 before, then Restart. Them i installed WL3 and restart. WL3 runs but didnt see my usb rode mic and didnt See my streamdeck. And it tells my that for example Spotify is unaviable. Every App Like Discord, OBS, Teams etc. are unaviable to use. What did i wrong?
I got the same problems with WL2. I installed it and could used it directly after installation but before restarting my system. after the next restart, WL2 did not work anymore. it tells my that there is no elgato hardware to use WL2
that complicated way install isn't difficult
I just use powershell for that and it's installed
and yes I agree, I had to litterly click here and then here and here to be able to download the file itself
I mean the normal version yes, I have security updates until 32
this is to install it
https://learn.microsoft.com/en-us/windows/msix/desktop/powershell-msix-cmdlets
could be that there are still files/drivers in your system
to have a true clean install again I use software like Bulk crap uninstaller or revo uninstaller
I recommend revo for not advanced users
This sounds like a usb issue to me. In the tech help channels we would advise you to make sure usb selective suspend and fast boot are disabled, and try different usb ports, as a start towards narrowing it down or fixing the issue.
For what it’s worth, many are using wl3 just fine, but it is a beta so your experience may vary; they would appreciate feedback on your beta testing in Reddit. That’s the point of beta testing, after all.
But wl2 is a retail release so be sure to run it by #official-tech-support to work out what’s going wrong in your setup before assuming something doesn’t work.
About 0,02% chance, it's big! 😉
Hello everyone, will the Wumpus Microphone come back?

Gz @halcyon gate 
gg @halcyon gate
GG @halcyon gate !
Congratulations @halcyon gate! 
gg @halcyon gate
Congrats
CONGRATS @halcyon gate !!!
Also don't forget everyone! We have a contest running where three winners will have a chance to win a Voice Focus code! 
And ofc there will be more giveaways/events/contests in the future. 
@halcyon gate 
OH MY GOD
Aww thank you! I do love chai haha


Thank you so much for this ♥️♥️♥️♥️
Just sent you a DM! 
Happy to see a fellow beard rocking bro win!
Damn dude you beard is 🔥
Thanks bro!
I wish my beard was full, I miss the bits next to the chin from the edges of the mouth down to neck, just two stripes that don't grow, everything else is beardy though 😛
it kinda looks deliberate
Huh that’s actually pretty interresting.
It does all come down to genetics, I only started growing it out when I stopped clinging to my head hair and shaved my head bald.
Got my father’s hairline otherwise 🥲
Congrats @halcyon gate!

i got my fathers hairline, started balding at 20, but not his beard genetics XD
Has anyone ever figured out how to stop wavelink from keeping the computer awake?
I know they say they solved that problem in an update way back but it never actually fixed anything
My displays turn off…
same but the PC never actually enters sleep mode. I know its wavelink at this point. For the longest time I thought it was my fan controllers but turns out thats not the case :/
oh dang my b i realize im in the wrong chat for this. Will take this elsewhere!
Yeah I got my beard genetics from my mother’s side of the family
@bronze kettle hey can you explain how Po won the giveaway he doesn't even have an entry???
You're confusing two separate giveaways.
The giveaway Po won is randomly drawn from the users who react to the giveaway post here: #giveaways message
Ok thanks for the clarification 👍
#new-years-contest is a completely separate thing
I was definitely confused
There's also THREE winners for the new years contest, not one haha
Understood

It's probably because I can't see the new year contest then because I only see one?
You don't see these three channels?
I see you have the giveaways role so you should have access to all three

I see 3 channels but only one giveaway for the new years resolutions nothing else
Oh, that's because the other giveaway is in the #giveaways channel.
The #giveaways channel is for giveaways that are react only giveaways or to notify our community of Elgato giveaways happening outside of discord
We create new channels for separate contests/giveaways that requires an entry
Ok so he won the deck+ and sweater?
Nope, they won like a full setup
It's mentioned in the channel
But the giveaway for everything was only for new years resolutions? He didn't take part in that.
people like to spam virus links in this server often? sheeeeesh
Incorrect. The new years resolution is a giveaway for three voice focus codes as mentioned in the channel.
I don't know what a voice focus code is so guess that where im misunderstood
If you click on "Voice Focus" it will link you to the page with an explanation of the product
😂😂 I can confirm I now fully understand
Unfortunately 😩 thankfully we have amazing mods and a great bot to handle that haha
Sorry about the questioning I thought a mistake was made.
yep he gone! Lol people are pathetic sometimes
You're good! Glad we were able to clear that up!
Appreciate your patience!
@halcyon gate congratulations bud fair and square!
Hope everyone having a great start of the year
can any one help me
?cth
We've created specific channels in order to keep everything organized and for you all to have an easier time receiving help from the community.
CTH = Community Tech Help
Please make sure to post your questions in the correct channels:
For any Elgato Marketplace questions
For any Elgato Stream Deck questions
For any Elgato Capture Card questions
For any Elgato Mics and Wave Link questions
For any Elgato Camera (Facecam/EpocCam/Etc) Camera Hub and Prompter questions
For any Elgato Lighting and Control Center questions
For any Elgato Green Screen questions
Friendly reminder: Elgato Support DOES NOT monitor this server. For official support, please file a ticket at https://e.lga.to/help. More info in #official-tech-support . Kind reminder to please treat everyone that's helping you troubleshoot kindly and respectfully. Just remember they're taking their time out of their day to help you. Any disrespect will result in a warning/ban.
i send what i need help with in the right spot
What product do you need help with?
anyone around that can help with wavecast. all of a sudden when i click all audio on wavecast on streming pc from gaming pc i get and annoying hum type sound
anyone know how to fix this.
Ask over in #wave-audio for better visibility.
Ask over in #camera-prompter for better visibility.
i did and show my screen
hmm i wonder if the galleon 100 is hot swapable
Is there a way I can share stream deck profiles across devices without having to export, transfer, and import the profiles. Maybe through my account or something? TIA
MCP could be a great accessibility tool also! Really appreciate Elgato's approach to AI. 
I experimented with voice controls for some live streaming software a few years ago, and it was a lot of fun!
- Add song to the request queue
- Change positions of songs
- Clear the queue
- Turn queue on/off
Etc.
Too bad I never got good enough at piano to stream music. 🫠
Congratulations 🎉 🥰
Been wondering that too. I built my own keyboard and use switches that are basically as silent as I can get them aha
Though I'd need to save for it given the price in the UK
.
D
Please open a ticket with a screenshot of this in #contact-moderators and we'll take care of it. 
I save my sd profile backups to Dropbox. Available on all computers.
Good morning! 👋 ☁️ 🌬️
Unfortunately got nothing to screenshot as the request got pulled as soon as I called it out.
Okay, if it happens again don't hesitate to open a ticket.
Thank you
Have a Amazing Thor Thor Thorsday!! ⚒️

Heyo Vic! 👋
how's it gonig?

It's going well over here! 👍
awe, I hope things get better
Aewsome
prolly not but its life got to work through it\
How's thing over there?
You got this! 💪
if I dont at least im surround by elgato products
Good, but sleepy.
yeah been there done that to many times but there is to many elgato profiles to make
is it sad that I want to trade my xl stream deck in for 2 stream deck +?
do it!!!
I meant to reply to you that it's good but sleepy. lol
hey you'll pull through. I remember when i had tough days. you're not alone.
more like tough years but cant complain I have it better then alot of people
Yeah, it was dark amd dreary when the alarm went off at 4:30am here. I definitely didn't want to get up but maintenance schedules say I do.
I was so comfy and then I had to get up
what maintenqce schedules? :WINK WINK:
awe, well let's loot at something positive today.
Time Periods where the service owner agrees to let me patch and reboot their virtual machines.
figured as much but was a wink trying to be funny
Ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Hello! I'm new here.
Where can I ask for information on Elgato's EpocCam app? I bought the "Lifetime Pro" version several years ago, but the app is now End-Of-Life.
Trying to set up dual webcams for a while now. Elgato's site recommends using "Camo Studio", which I have the lifetime Pro version of.
either that or ask in #camera-prompter someone might have the same problem as u and can help
Okay, thank you! I'll do that and ask Camo directly, if possible, as I am somewhat switching over to Camo (until I can get a 4k Camera Capture card for my DSLR).
Thanks for the idea. I haven’t done a backup yet. I’ll take a look at that.
Not gonna lie, I wish epocCam was still available. Tiktok Live Studio lets me use my phone as a camera but if I want to multistream I’d either need a separate camera or use Camo
Does anyone own and use the Wall mount??? My new desk is doesn’t allow me to move my key light so I can spread my desk out. So I’m hoping someone uses that so I can ask some questions.
Heyo again Vic! I’m still doing well! Finished work, made it through afternoon traffic, stopped at Wal Mart for a few groceries and finally home to a happy dog!
Afternoon all
That’s awesome! I also completed my work day!
i like how the elgato ig post explained something i was curious about with the new keyboard. where did the number pad go if you need it....its cool how it has a hardware mode to show the num pad if you close out of the stream deck software.
Woo Hoo!
So is the XLR interface not being made anymore?
Yes it is, just sold out since it was on sale for the Black Week and such, takes time until it's restocked
black friday and christmas are always sell out time for hardware, elgato stuff is so good that it runs out of stock frequently LOL
im doing...
lots on the go to try and get done before the weekend
hope you are doing amazing too Ochatach
Hey!
So the stream deck software takes over the stream deck part of the keyboard but when disabled (yes you can disable a device on the software to let the other stream deck compatible software take over while having it open and active for SDM and VSD) the stream deck keys will just mimic the numpad
yup! or if you want to have a num pad while using the stream deck software, they showed a way to mimic a num pad with the software
i wonder if their gonna make a white version of the keyboard
I've seen mention of the switches for the keyboard portion of the Galleon 100 SD but has anyone heard about the Stream Deck portion?
it's the regular ones
TY
np 
how do I change the software effects
im listening to myself in a call while changing them but nothing's changing on discord, it does change if I sound check in wave link app tho
Discord is using the wrong input.
Use an output from wave link as your input for apps, in order for them to hear the effects being applied in wave link.
soo
wait dms I can't send pictures in here
?cth
We've created specific channels in order to keep everything organized and for you all to have an easier time receiving help from the community.
CTH = Community Tech Help
Please make sure to post your questions in the correct channels:
For any Elgato Marketplace questions
For any Elgato Stream Deck questions
For any Elgato Capture Card questions
For any Elgato Mics and Wave Link questions
For any Elgato Camera (Facecam/EpocCam/Etc) Camera Hub and Prompter questions
For any Elgato Lighting and Control Center questions
For any Elgato Green Screen questions
Friendly reminder: Elgato Support DOES NOT monitor this server. For official support, please file a ticket at https://e.lga.to/help. More info in #official-tech-support . Kind reminder to please treat everyone that's helping you troubleshoot kindly and respectfully. Just remember they're taking their time out of their day to help you. Any disrespect will result in a warning/ban.
Good morning! 👋 ☁️
good morning! I am yelling at magic rectangles
one of the magic rectangles is not blinking in the colors it should be blinking
or rather, it wasn't, up until it decided to begin blinking in the correct colors
and I have no idea what changed to make it work
It was the yelling
Good afternoon, everyone! I wonder, will Elgato be present at TwitchCon Europe in May?
Anytime things work and you change nothing it's a celebration, and we all accept it as our own doing so great job!
It's kinda like being a programmer. If it doesn't work, you question why. If it does work, you question why 😛
normally I'd be perfectly fine with just accepting the new fact of the matter, but the math kinda changes since I'm testing this hardware for some other people 😅

Hey Vic
Hi ya!
I need help I juste bought the stream deck pedal and it’s not detected on the app
Can someone help me out please 🙏
Ask over in #stream-deck for better visibility.
I need help!
I have a stream deck, and I'd like to have two icons in the same slot.
For example:
When I press the mute button, I want the icon with a bar to appear, but when I press it again, the bar should disappear.
I hope that's clear 😅
I've searched everywhere, but I haven't found an answer online.
To reply, please ping me.
?cth
We've created specific channels in order to keep everything organized and for you all to have an easier time receiving help from the community.
CTH = Community Tech Help
Please make sure to post your questions in the correct channels:
For any Elgato Marketplace questions
For any Elgato Stream Deck questions
For any Elgato Capture Card questions
For any Elgato Mics and Wave Link questions
For any Elgato Camera (Facecam/EpocCam/Etc) Camera Hub and Prompter questions
For any Elgato Lighting and Control Center questions
For any Elgato Green Screen questions
Friendly reminder: Elgato Support DOES NOT monitor this server. For official support, please file a ticket at https://e.lga.to/help. More info in #official-tech-support . Kind reminder to please treat everyone that's helping you troubleshoot kindly and respectfully. Just remember they're taking their time out of their day to help you. Any disrespect will result in a warning/ban.
Thank you very much!
I hadn't seen it!
you're welcome
Thanks
This. 🤣🤣
Definitely putting the Galleon 100 SD on my wish list
I debated it, but I literally just orderd a Vanguard Pro 96 during the holiday sales.
I long since went past second keyboard territory 
That said the G100 is also twice what I paid for the hall effect Vanguard Pro. Maybe if it goes on sale later
I got three but two are not plugged in
Oh I have way more than just two 😛
Yeah, my current one is a Keychron V6 Max. It's solid and very nice to type on. The Corsair ones go on the gaming setup though
I got 3 Varmilo, 2 Logitech, 2 ASUS, 2 Apple, 1 AKKO and probably some more..
Oh yeah, 1 Corsair and 1 QPAD
custom built, corsair and log here
one of the Logitech ones has never been opened, it's the new slim wireless one whatever the name was 😛
G915?
why didnt u open it?
I won it along with other Logitech stuff, only used the mouse for awhile, the G Pro superlight, but was too small for my hand so gave me cramps, so bought the G502 x lightspeed 😛
the package I won was the keyboard, mouse, mousepad and some headphones that looked cheap 😛
My main board is a Nullbits Nibble with custom lubed Moondrop Lunalight switches
I have a backup board that is a Bauer Lite X-Ray Edition with the Seaglass switches and the full X-Ray keycap set
The Galleon has entered my main lineup on my actual desk though with the SD functionality
on the nibble yeah, caseless essentially so you can see all the diodes and the chip
that xray one looks sick
I love the see through plastic look
I was really hoping Corsair would make a plain clear plastic Xeneon Edge alongside the atomic purple one
I love retro seethrough stuff also, I really want the retro LTT screwdrivers xD
Ohh that's the white and purrple one right? that one is really cool
not that one, but that one is cool too, they made new ones with translucent plastic similar to the N64 and Gameboy translucent colors
sounds sick! I haven't seen that one
I'm honestly just glad that the clear plastic is making a return
i got the Logitech G PRO keyboard
I checked the changelog for 7.2.0 and the only thing that’s new is galleon 100 support it’s not even worth updating for me
Might be a few quiet bug fixes, they don't always get listed. But yeah, that's the main change
Just dropping this here...
https://x.com/elgato/status/2009769955093557372?s=20
Can we brag for just one second... 👀🏆
Thank you for an amazing CES 2026!
Galleon 100 SD starts shipping this month on 1/29, and you can order yours right now: https://t.co/jZeiOgmIMA
Anyone ever had a black screen issue with the 4k pro?💀 too lazy to call them and wait a year for help
Hey guys having some issues getting my profiles back to the 3 devices I know after formatting the pc. Didn't have this issue before. Where can I get help for this? Thank you.
I've never seen Keyboard like this. Does it looked like Similar as Stream Deck?
That's a literaly Stream Deck integrated into where the Numpad would be, yes.
(with high res buttons)
so awesome!!!
I see. I think it'll be much better than Stream Deck XL.
totally worth bragging about
Can't wait to use it! I'm really excited to try out the GALLEON! Going to use mine for gaming with Smart Profiles to make quick actions for certain games!
I have a question about giveaway prizes: are customs fees covered? I won something on Twitch and it's currently being processed by customs
Reach out to customersupport, they need the info and will pay the customsfees
what did you win? 🙂
oh that's awesome! I won a Streamdeck +! so excited to start using it soon!
personally the first time I didn't have any idea , paid it and asked and they said if I had reached out they would cover it, second time I didn't wanna wait and risk it going back (they were outside my door) so just paid it myself xd
Customs in Sweden is probably handled differently, friends elsewhere have gotten letters to pay the fees before it keeps being shipped so then it works better probably
I only have a streamdeck mini atm and been loving it for as long as I've had it but 8 buttons instead of 6 and 3 volume dials + touch screen is gonna give me more possibilities 😄
Also keep in mind you can have up to 10 Pages and Folders and unlimited Profiles 😉
I use one of my 15 key Stream Decks to change profiles on my XL and Plus 🙂
I live in the Netherlands and it's shipped through DHL, not entirely sure if they hold the package until custom fees are paid or send the bill afterwards
still better to talk to customersupport before either package or bill shows up 🙂
I know, I'm not a power user in that regard, I mainly use it to switch scenes on tiktok live studio and toggle mic and cam at the moment and to toggle my mic on discord
You got room and possibility to grow 😉
but having those dials is gonna come in really handy with adjusting audio levels on the fly and such
Oh yes, love my Stream Deck+ ❤️
I'm hoping to add the XLR dock and a wave XLR
I still need to use my 2nd one for something, basically just plugged it in and did a couple dials and nothing else xD
with the XLR Dock you won't need a Wave XLR, the Dock is basically the Wave XLR without the faceplate or dial that just connects straight into the SD+
So cool! Congratulations 🎉
Unless you meant the Wave DX (the mic)
Congrats on winning it! I have a Stream Deck +, it's sooooo nice to pair with Wave Link to adjust inputs/outputs on the fly!
thanks @oblique mica and @loud vale 😄
I know but I like the way the wave XLR sounds. I blame Nutty for that 🤣
The interface is exactly the same though as the Dock
I think you mean the Mic, Wave DX
yup I do, my bad
Yo

but before I go for the mic upgrade I want to upgrade with the gamecapture 4K X so I can get more FPS (I prefer 120fps on PS5) and my wife can hook up her ps5 to my current HD 60 S+ . my wife and I plan to co-stream later this year when we turn her makeup studio room into a shared content creation room
Ohh nice
I'm really looking forward to when we can make it happen 😄 but we got some expenses like furniture, paint and a new monitor for her to use to take care of as well
why is my wave xlr not showing up in fl studios
There’s no ASIO support
I ordered a mic and a mic arm and even though both say delivered i only received one item in my box 
Pain
Man the mic is fully scratched up even more pain. Time to contact support ig
Does anyone have a contact email cause I genuinly can't find it (for europe)
Thank you i sended a ticket, I hope I get a quik response 
You're welcome! 
Looking for help. With Secure Boot enabled, my Elgato Stream Deck+ won’t power on at all (no logo/backlight). When I disable Secure Boot, it works normally.
UEFI boot, CSM off. In Device Manager, the device shows Code 52 (driver signature issue). Anyone seen this or know a fix?
If you haven't gotten an answer in #stream-deck, I would submit a ticket via #official-tech-support
I’ve already submitted a ticket it’s been about a week now and they said they’d follow up with next steps. Just posting here to see if anyone else has run into this before. Nobody responded in stremdeck.
Good afternoon
awe hell
are there any workarounds for it or no
@amber steppe good afternoon how’s your day going?
Whats up homies anyone here?
<@&581565551495741448>
?! :/
Not allowed?
If ots not allowed ill remove it
But damn, that was hardwork
No it isnt if you could please
Okay np
Self advertisement goes against our rules for here
any link can be suspicious
Thank you for understanding 
It does not change we cannot allow advertising in here.
Its okay.
Thank you. Hope everyone is having a good Saturday!
Cuz im telllinnngg yooouu
Its worth checking my friend
Ahahahahhaha
Im laughing outloud solo ahaha

There is no places for it here. We only allow #live-now and that's it. Please drop it.
Bro stop forcing 😭
🙂
Ohh you play drums :3 what genre?
MÉTAL
rock, metal(especially heavy and power), trying funk from day to day
Nice nice :3
What type of metal are you into ?
Mostly deathmetal, goregrind, slam, brutaldeath and such 
no
Oh ok
Okay i would have shown you my 7 stirngs
More focused on vocals then
;P ibanez
I use a Washburn dimebag model, and an Ibanez RGR, also have a Stratocaster 🙂
I miss playing drums :<
If your mic keeps messing up I’m going to make a review video of me destroying it with a bat
Why did you stop
One should never stop drums once started
Apartment, and our rehearsalspace was broken into and my drumset stolen along with my friends amps
Sorry for the late response I was playing warzone with my squad
Did anyone else have the issue of not connecting with elgato link?
Dang that freaking sucks
hey if anyone with the wave xlr w/ a skin sees this
if i buy the doom xlr interface rn can i just peel off the doom skin
It's a faceplate not a skin per se. You can get replacement faceplates through the spare parts store at https://www.elgato.com/spare-parts if you're looking to swap it out. (Just filter the store to Wave XLR)
i want to have just a black one
so if i get the doom one
i can peel it off?
and the doom one is cheaper so
yeah
You can't peel it off, it's a hard plastic faceplate, not s sticker. You'd have to repalce it
so its screwed on and its actually different than the black one
ah
so its not just a black one with a "faceplate" on it
the black one has a faceplate itself
so i have to just wait for the black one to be in stock
that's unfortunate
Yeah, the other option is to replace the faceplate with another - but it definitely wouldn't be cheaper that way. You might check for stock right vendors like Best Buy if there's any in your region - though a lot of those are out of stock from the holiday sales too
