#My taranis qx7 is in polish and is in mode 3
211 messages · Page 1 of 1 (latest)
Google it
@sly canyon Do you still need help with this?
Ah shit worst timing
tag me in 30min pls
ok I'm back @sly canyon
yo ^^
So, first of all - RTC Battery low is not good
ye
you'll probably need a new RTC battery
it's a small coin cell battery inside of the radio
Is it like a cr 1220 battery?
not difficult to replace, just a bit fiddly
I'll look it up
ehh, something like that, tho I don't know the exact type
it's like a bios battery
that's what it reminds me of the most
ye
yeah looks like CR 1220
Now, in regards to the firmware
do you have any models set up on it that you want to keep?
uhh not rlly
ok cool
how about we just flash it to EdgeTX
(a successor to OpenTX)
if it isn't already.. idk
ok
It's pretty easy if you have a PC with Chrome (or a chrome-based browser, like Edge)
uhh I have to go
ill catch u in like 1 hour or smth
aight
👋
wadafug am I
supposed to do
okkk
plug in its USB into your PC
while you're at it, run this:
https://impulserc.blob.core.windows.net/utilities/ImpulseRC_Driver_Fixer.exe
this fixes the firmware update drivers which windows loves to f* up
after connecting the radio, run the Driver Fixer
then, Flash via USB
it will ask you to add a device
where you want to select STM32 BOOTLOADER
yuppp
okk
I'm helpering in #❔help-quick-questions too, soz 😂
alright, unplug USB and try to power up the radio
wait you have no SD card in it?
show pic of the screen
you sure the SD card is alive
do you have an SD reader?
If so, could you format the card to FAT32?
nah
it is
the radio disagrees
physically or software?
physically - you have to take the back off and screw with the screws on the gimbals
but radio says that the right gimball is the throttle
radio config -
long press MENU
page to RADIO
scroll all the way down (if I recall correctly)
and there you should find Mode
the hamburger icon
ok
Yessss
IT IS MODE 2 :333
THX SO MUCHHHHHH
NOW THE WELCOME TO OPEN TX VOICE WORKS
@river saddle THX SO MUCHHHHHHHH
oh btw, you'll want to replace the SD contents with EdgeTX ones...
well, "want" is a strong word
it would be advisable
wudufug
how do I do dat
ideally with an SD reader 😂
if I don't have it?
okay so
be careful with the RADIO and MODELS foders
yeee
MODELS is the same, but for models
lol that's just a bugged date
Ik
the radio prolly thinks it's 99
so what next
download that and extract that to some folder on your PC
(don't extract it directly to the SD card)
then just copy & overwrite the contents onto the SD card
you should see that the folder structure is similar
yup that's fine
unplug and restart the radio
that's it
off and on 😄
uhh already were fixed
äh
thx for da help!
^^
:3
if you ever decide to slap an ELRS module into it
I am also sadge
look up the QX7 crossfire fix
the QX7 ACCST has a hardware issue that prevents external modules from talking to it at full speed
but it can be worked around or fixed entirely
here's a link to the piece of hardware:
https://www.team-blacksheep.com/products/prod:qx7mod
seasoned pilots tend to have these just lying around lol
ok!
download the file and upload to the sounds folder on the sd card.
ok