Hey y'all so I have one motor that would always stutter when giving full throttle and the rest of the motors are fine except for this one here is a video to show what's happening!
#Motors stopping when reaching full throttle
white karma
warm quail
@white karma that happens. that's air mode, it's because you dont have any props on
when you give the drone throttle but it doesnt feel itself going aywhere it gets confused
put props on and then it'll be perfect
and charge your radio
white karma
<@305544898470477824> that happens. that's air mode, it's because you dont have ...
Does that happen also when using betaflight to test the motors?
warm quail
yeah
white karma
yeah
When installing the props back on the fins have to be slanted down to the direction you want them to spin correct? I don't want to install them on wrongly xD
warm quail
white karma
This drone is going to piss me off
I have the props on all correctly in the video I followed the diagram in betaflight for the prop direction the slant facing down into the drone but the air isn't being blown down and I have the props on for the motor that was having issue and still is stuttering and I can't even update the damn firmware!
so I can't use Motor direction in BetaFlight to help!
warm quail
ah
welcome to FPV
it's a bitch 98% of the time but that 2% of the time it's one of the best things you'll ever do
white karma
I need help like mental help I thought drone hobby will be easy but no the markets and software people want it to be fucking difficult for no damn reason!
warm quail
you understand :)
warm quail
I have the props on all correctly in the video I followed the diagram in betafli...
what happens if you just try to fly it
white karma
It flips over and all the motors stop
warm quail
can you show a video
white karma
warm quail
there’s two possibilities
either your props are still wrong
or your motors are not spinning right
white karma
or your motors are not spinning right
The were originally spinning in reverse
and how in the hell do I make sure that my props are on correctly like they don't have a top left or top right on them nor a bottom left or right or this side up this side down!
white karma
@warm quail would it be better to get a new frame with new motors and re connect it all? or would that be a waste of time?
granite vessel
and how in the hell do I make sure that my props are on correctly like they don'...
See how the motors are spinning compared to your propellers
wintry patrol
bro this is the same video from 2 days ago
did you check your motor and prop directions after doing your orientation
which was all after this vid
spare kelp
I need help like mental help I thought drone hobby will be easy but no the marke...
You've been mislead, it's troubleshooting and frustrations for at least 50% of the time 
When your quad is flipping out, it's almost always because of a few simple user errors;
1: Motors spinning the wrong way
2: Props on wrong
3: Board orientation is wrong, ie; betaflight thinks the front of the quad is the back instead
4: Motor output number is wrong, ie; spinning motor 1 in betaflight actually spins motor 3 instead
white karma
Blheli esc configurator might fix it
Is that another software that I would need to download?
spare kelp
Is that another software that I would need to download?
yes
it's online too
this in itself wont fix anything, but you can revert the motor orientation etc in case that is whats wrong
deep kindle
I cant seem to watch the video but if it turns itself of and beeps again its the esc thats not good. Had the same issue