#site-support
1 messages Β· Page 107 of 1
Thank's
Gave +1 Rep to @quasi agate (current: #976 - 5)
If the issue persists reach out to support on the email below
Thank's
Gave +1 Rep to @ember osprey (current: #1 - 4827)
When connected to the target machine through my local VM (using openvpn), Nmap scans take forever to return results. In fact the result is never even produced!
On the other hand, if the same scan is done on attackbox it takes a few seconds.
Any way I can fix this?
That may depend on the flags that you're using . Of course , it can't be as fast as on AttackBox since AttackBox is attached directly to the same network as the target machine
Hi,
Yesterday I was in the Diamond League and today I'm back in the Sapphire League? Why? I finished at the top of the rankings.
Try to reach out to support on the email below
Hi, is there something wrong with the VPN? I canβt connect?
Why do you think so?
Itβs an old profile and I need a new one???
You're not describing the issue you're facing. Did you download the .ovpn configuration file and is it not connecting?
You can try to change server and download a new file
If you're using windows os , use community version of openvpn via cli
Ok. But it was working fine before.
TO tryhackme staff
can it be lil easy in this league, it is not even a day and guy is done with 1k points,
is it not a try-hard situation?? where all are just try-harding for the 1st place.
pls take some actions on to this...
hello, can someone help me with subscribtion ? I paused my sub and now it have status paused, but i recieved a email that my subscribtion will resume 7th may , but i dont want to resume this month. The problem is that i dont see any button with stop subscritbion , what i need to do to cancel sub?
Can anyone pls tell me how do i change my country to something else it currently shows wrong country.
@worldly tusk it is dependent on your phone-number
sry cant help i am a free user, but @naive dust can help you
i got it its based upon timezone , fixed it , yayyyyyyy !! https://help.tryhackme.com/en/articles/6611897-changing-your-country-s-flag
ok, understood a new stuff
vedant can i pm you
pm??
PM = Private message.
oh
yup... no prblm
hello payment site is not working while subscribing to premuim content or it just with me?
based in US
@worldly tusk is also facing,
Hello, I was wondering if I could perhaps have some help with uploading a VM. I'm trying to create a room, and right now I'm trying to set up a machine to SSH into. I've created it in oraclebox (Ubuntu 22.04), set up SSH and such, but when I upload it to THM and try and start it in the room it says "Oh no, an error occurred while starting VM: Invalid parameter value." Any help would be appreciated
hey guys, i accidently purchased the annual plan, can i get a refund or its not possible?
Reach out to the support team, I think you could if it is no later than 7 days.
thank you so much!
emailed support
May I know the time of streak reset for each day? I answered a question before 12am but my streak was lost anyway
I'm pretty sure it's 12AM your local time.
You can contact the support team to restore your streak.
ok thanks
@bronze vale are we allowed to post memes with harmful commands if we censor the commands to an unrecognizable state?
Sure
Try to reach out to support on the email below
Check out this article
https://help.tryhackme.com/en/articles/6611897-changing-your-country-s-flag
For payment related questions reach out to support directly on the email below π
Looks like the wrong channel though π
skipped a league ?
why cant i start my machine
Can you verify your account and share a screenshot of it?
This is verification for Discord
Getting issues in payments all my cards are failing, emailed thm still no reply. Please help me out
Can't buy THM subscription
Try to reach out to support directly on the email below
verify doesnt work
it must work , don't add additional spaces
seems like you've already started it
This machine probably isn't likely to be split screen.
which room is this?
I have an error with my subscription again and I wrote give feedback and they do not respond. What should I do? Please help me.
have you tried sending an email to tryhackme?
try sending an email to them π
"How?
this is their email address: support@tryhackme.com
Thank you, I have written. When can I expect a reply? Have such issues happened to you as well?
It can take up to a week for a support to reply
Do you think I should create a new profile, or should I wait for this profile to be fixed? Or is there something else I can do?
wait for a reply π
which alternatives?
I mean, how can I activate it, where else can I write, or alternatives like changing the payment system?
you will have to wait for the tryhackme team to reply, that is the best option
Only support can help you with payment issues, please wait for their reply
Thank you for your response and the advice you gave. Best regards, by Quimby. @ember osprey @tough aurora
Gave +1 Rep to @ember osprey (current: #1 - 4843)
Hi guys i am currently facing issue when i click download configuration file for wreath network. It says "An Unknon error has occured" I am having 7 streak.
You need to start the network beforehand
I leaved the room and rejoined the room that helped. Thanks for the help man
Gave +1 Rep to @ember osprey (current: #1 - 4844)
where can i see my friend's friend request to me?
check your email π
if I didn't receive anything, then my friend probably didn't send me one yet, right?
Also, I sent my friend one a few days ago, and he accepted, but it shows I have no friends
Try to resend the request
I tried, but it said I already sent one
Any update on payment issues please?
did you email support?
Thanks, yes. no response to email yet
Gave +1 Rep to @tough aurora (current: #270 - 28)
when did you send your email?
yesterday
wait a few more days π
It can take up to a week to get a response
Thanks hoping they would still honor May the 4th offer of 25% discount then
is there a may the 4th offer?
Payment issue is still there contacted tryhackme via email no replies yet , please help me put i dont wanna miss this discount
You'll need to wait until they reply, sorry.
Multiple emails will also put you behind the queue.
Nice, got premium again
Hey guys, I need some help. For the last few days i'm unable to connect to a machine using VPN. I tried regenerating, changing the VPN server log out of a room and log back in. I'm able to see the THM page 10.10.10.10 but no luck connecting to a machine
Why can i not answer questions on THM
User Agent: Android / Firefox
As soon as type a character in input box, it gets deleted on its own.
You're connected if you can access 10.10.10.10
room ?
Everyroom I been through, and onload, I always get prompy saying "Failed to load theme"
But currently I am in Path CyberSec 101 & room Incident Response Fundamentals
Lo-Fi but for past few days, any machine I try or room same issue. I know seeing the page that Iβm connected should mean I am but not sure where Iβm going wrong. Just started THM few weeks ago and loving it more than HTB π¬
Can you please verify and provide a screenshot π ?
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
he guys i am trying to buy tryhackme primum subscription for a month but "Your payment could not be completed at this time. Please try again later or use a different payment method. If the issue persists, contact your bank for more information." this issue keep comming
any help me out here
What payment method are you trying to use?
visa
i think i have not unable payment international cude be the resion for this but i am tring tov enable t but i am getting messages from bank about techenical issu
2 day its day3
Is it a prepaid Visa or one you got direct through the company? The reason I ask is because if you're in the US, a lot of prepaid credit cards will not work when buying from overseas vendors and THM is from the UK
ma indian and i have sbi bank
Oh, okay, you said your bank is having technical issues?
If they're having technical issues, you'd probably be best off contacting their support team and seeing what's going on
That said, others might have different ideas/suggestions before you do that
i did the already they say same techinal issu not doing anything
They didn't tell you whether it was a technical issue with them or not?
they say i have to visist bank or and about problem they ssay its technical issu nothing done from remote
Are you 100% sure you're speaking with your actual bank? And did you contact them first, or did they reach out first?
loo k i all rready trust a online fraind who have subscription and i send 500 rupi to get subs and he take mony anf run away
Only support can help you with payment related issues , you can contact them on the email below
yes help line sbi is 18001234
ok
Hello, I have a problem. I can't buy the annual premium subscription with a 40% discount (student + starwars offer). I have taken all the necessary steps, entered details in all the necessary fields and have been setting up since I created the student/intern account. Can you help me?
I don't think the student discount and the starwars offer work at the same time
or does it?
Reach out to support directly on the email above π . Only they can help you with subscription problems
wait, can you do both discounts at the same time?
no
Thank you!
Gave +1 Rep to @ember osprey (current: #1 - 4850)
4850 is crazy
fr
I am not sure about combining 4th of may discount and student discount , however , support will provided more info π
But as far as I know combining multiple diacounts isn't possible
shadow pls check pm , I am facing the similar issue , emailed the support still no help
Great news: you can save 25% on your TryHackMe subscription with annual billing!
And there's more: students get an additional 20% discount on annual plans - increasing your total savings up to 40%. π
message dekh bro
hey adrian, thanks for clarifying , but i can only see 25%off even when i am student , is there any way to stack this offer on top of student offer
Gave +1 Rep to @cold tartan (current: #2860 - 1)
I am buying monthly so I don't get any offπ
hi support i cant seem to login with my gmail account can you assist?
email tryhackme
thanks
Gave +1 Rep to @west chasm (current: #67 - 135)
huh, didn't now that worked
I cant start minikube
it keeps failing
could someone take a look at this
?
nevermind after a few attempts it started
Very odd
these are supposed to exist right
i try to buy subscriptions ,but my debit card payment is not working it shows change the payment method. ,anyone help me to slove this issue and buy subscription
i try other debit card also but i don't do the payment to subscription
Try to reach out to support directly on the email below π
hello
sup
pretty good
if you just wanna chat can we move over to #general since this channel is more related to tryhackme support
Where to get help with Voucher/Creditcard/Stripe bugs?
i think you need to contact support
hey i need help in the room "KQL (Kusto): Advanced Queries"
task 3
what the answer for Run the "Combining Multiple Columns From Different Tables" query and modify the time range. What is the threat status detail?
I previously paused my subscription. today i was charged the monthly amount so i sighted and went to the site to at least do some rooms. when i try to access premium rooms it says my sbuscription its still paused
I try to resume my subscription but the button just redirects me to the subscription settings page and there is no button to unpause
try to get in touch with support on the email below for payment related issues
How can some one join the study rooms
The discord private study rooms
you may need to verify first
All about TryHackMe Discord Server.
Okay
Target machines aint working in challenges, completed a challenge 10m ago, now any of the target machines aren't working. I already know im connected to network; 10.10.10.10 working tho
I don't know if it has anything to do with my internet
Which challenge machine are you doing?
ColddBox, tried 2 more challenges too
Hello, I think there's a problem with simple-ctf room. When I try to start machine, it returns invalid parameter error
Try to refresh the page
Same:
Oh no, an error occurred while starting VM: Invalid parameter value.
Hi, I need some help. I canβt connect the VPN to the Kali machine
Which server are you using, and which country are you in?
Im in eu and im using regular-1
Use 3 or 4.
Ok thanks ill try and im coming back to tell you if it worked
It worked thank you man
Hey @ember osprey , I see a lot of people are facing payment failures (me included) when trying to buy TryHackMe subscription , I think you must escalate the issue I tried emailing tryhackme but nothing concrete from their side.
But they offer ends today
not possible bhai, even credit card is failing I have tried 4 different cards they all failed.
I really hope its really unfair I am trying since 2 days
And bring upi
yes
mods aren't site staff.
I've forwarded the message to staff , that's all that I can do π¦
I'm sure staff are aware of the issue.
Thanks so much guys really appreciate your help
Gave +1 Rep to @ember osprey (current: #1 - 4854)
Thanks to you too
Possibley think about upi also guys
Its easy process
Hello. Im having an issues while using nmap, gobuster, acessing webservers of targets. Im using the attackboxes on eu-regular 2. Do you know if there are any issues ongoing? They seemed fine earlier.
This should be fixed, please try again π
I am having same issue with https://tryhackme.com/room/basicpentestingjt, https://tryhackme.com/room/kenobi, https://tryhackme.com/room/vulnversity
Hello @worldly tusk & @slate loom π
Apologies for the issues you've encountered. I've forwarded this internally for this to be investigated. Will reach back out when I hear anything π
I have having this same issue
lol, I am trying to find a nice room to complete, but many are giving issues right now, no hate, tryhackme is awesome, just want to know if there is some wide issue?
https://tryhackme.com/room/wordpresscve202129447 also had issues a few hours ago. Not sure if it's still persisting. We were given an IP, but the machine had all filtered ports upon spawn. Nothing was possible.
Which room?
same room and same issue mentioned
before trying this room, I was trying https://tryhackme.com/room/kenobi, https://tryhackme.com/room/vulnversity, https://tryhackme.com/room/basicpentestingjt, which have different issue where I can't nmap the target machine, it returns as all ports as filtered.
now I am finding another room to try
Oh same as this one then.^
Maybe it's a problem not related to rooms but machine spawning mechanism?
I'll forward that to have it looked at, but it indeed seems to have some issues here for those rooms. Not getting any ports either. The Simple CTF room should be good for now @gloomy tapir and @austere horizon
thanks, I will try simple ctf room later, doing another room now
Thanks for the quick reply. π
I'm available to test again should you guys need it.
Gave +1 Rep to @crystal marlin (current: #5 - 1862)
Hey folks, looks like there is some issue with openvpn routing to hosts 10.10.1xy.z, found previous complaints but haven't seen any solutions. Routing table looks reasonable on my VM (10.10.0.0/16 via 10.2.0.1). Can't reach machine on 10.10.211.86. Traceroute stops on 10.2.0.1 as well.
update: i can reach 10.10.150.100. my initial hypothesis about 10.10.128.0/17 was wrong
What do you mean attackbox on reg eu 2?
https://tryhackme.com/room/vulnversity I have problem about this room machine I already spawn the target machine and start openvpn in my environment but I can't reach it at all.
The IP via ping?
10.10.9.127 I can't ping it. But I can ping the machine in Tutorial room.
10.10.52.159 this ip.
I currently can't reach the box in the Skynet room either, i've tryed pinging with my thm vpn on and from the attackbox to verify
Yeah, it's a wide problem. The staff is aware.
Happening for multiple rooms as we speak.
Ports filtered, all of them.
Yeah had it earlier today with other boxes aswell, bagned my head against it a bit before moving on
They're working on it as we speak, so let's wait.
Bet, thanks for the info
It seems that there"s an error with my badge generation in that I get the badge on my profile but when I actually complete the badge, it gives me the badge for the "First Four" badge instead of the one I earned
The correct badges show up in my profile but it definitely looks like a bug because this one was supposed to be the "metasploitable" badge.
this is on PC by the way
Hello so I recently deleted my old discord account
How would I go about changing the token to this one?
You're going to have to DM a mod. Such as @._scrubz_. / @kgbkp
I agree. My payment failed again. I've tried before and I had to give up the subscription then as well. All because there were issues with payments
Hello guys, Iβm ( network core protocols) , in task Whois. How to login target computer, I only see ip address, not password. Can any body assist me
You don't need password for whois
So how should I write it to get ( user@tryhackme).
every time I use
Ssh user@...
ask me for pass
You can just go to who.is website and search there
π«‘
hello there, can anyone help me, why I can't remove "Lateral Movement and Pivoting" and also can't get vpn access of the room?
I've created a ticket on THM platform but no got a response
if you aren't premium user AttackBox doesn't have Internet access
You need to start the network first in order to get vpn file for it
I am premium, but I didnβt ses the hint button. I am all good. Thank you
Gave +1 Rep to @ember osprey (current: #1 - 4855)
but why I can't leave the room?
Wdym ?
I want to re-enroll the room so, I click options leave the room but the room always appear on my room lists joined
I dunno why
leave > wait 10min > rejoin again
I can't rejoin cause I can't leave the room, I've click leave room button but it always appeared on my joined rooms
@ember osprey Use GPG to decrypt the message in ~/Public-Crypto-Basics/Task-7. What secret word does the message hold
i have used the command gpg --decrypt message.gpg to which i have received No Secret key message
You need to import the key first
gpg --import <key-file>
It worked thank you π
Hi THM Team,
Looks like for me, attackbox keeps on working for like 30min (out of 2hrs), then suddenly unreachable. It's hanging on "Connecting...". Checked its public IP, that's also unreachable once I start to face this issue.
Pls check/help. My username of THM: @crimson mulch
try emailing tryhackme
hey guys i am having some problem purchasing thm subscription
can anyone assist me
can email support support@tryhackme.com
i think problem is on bank's side
i am really confused
I know there was a bank holiday or something the other day effecting it, don't think its the case again. Can try start by emailing support anyway they should be able to help
alright, Thanks
Gave +1 Rep to @quasi agate (current: #851 - 6)
Hi there, sorry to bother, has the VPN been very laggy lately? My vm are not working properly when I try to do some CTF, websites are slow, or not even loading for like 10 mins etc
which vpn are you using?
openvpn for the THM Vms
sorry, which location vpn
like the location of hte vpn
I think EU regular, is there an easy way to check?
EU-Regular-4 Actually
Should I use the VIP ones, has a subscribe user?
Yeah , try vip ones if you're sub π
is there a diff VIP 1 and VIP 2?
Shouldn't be
Thank you π
The IP given to you.
All VPN files give you a different tun0.
No sorry I meant in term of performance
The issues with those rooms should be resolved now π Please let me know in case that happens again
cc @gloomy tapir
Hey, all those guys that are facing payment issues please email the support I got it resolved that way too .
everything ok now π ?
Yep thanks for your help
Gave +1 Rep to @ember osprey (current: #1 - 4859)
Glad to hear that the issue has been resolved π
they even offered me that 25% off discount as I have been trying since then .. very kind person..
Sorry for another question but like do we get our own attackbox here , i am not able to find it , is it in each room or some other place
Can't give that much (max 1)
The attackbox is at the top of some rooms.
Yeah , like Scrubz said majority of rooms have Start AttackBox button at the top , you can also choose Kali machine from drop down menu . Each user get his separate instance π
Will give a try
Got it , thanks
... Tagged the wrong message but same person π€¦ββοΈ
Same. Mailed today and waiting for response
guys i have a question, is this a bug or i am doing something wrong whenever I launch VM cannot type certain letters in my terminal like if I type "ls" it only type "s" and when I type 'h' it opens up a new tab in the browser and i use chrome
I have to write in the clipboard and past my command and i user attackbox vm
Have you checked the keyboard configuration on it?
no
in the attackbox??
i will check
Hello team,
My name is Maryjane, and I'm new here.
I've been trying to subscribe to the premium package for a while now using different dollar cards, but I keep encountering errors. At different points, Iβve received different error messages, and none of the attempts have been successful.
You may need to reach out to support@tryhackme.com
They deal with support with account and billing over E-mail.
Okay thanks
hai THM Staff or anyone else can you help me with this problem, I can't start the challange
try to leave the room and rejoin after few minutes π
Good Morning, I just joined TryHackME and at the beginning. I was able to connect to server yesterday without any problems, but today it's not wanting to connect. And as you see beclow, I'm trying to click the Start Machine button but it's grayed out and can't continue with the module.
are you logged in and joined the room?
I can't leave the room I don't know why π π
you have to /verify first
are you a subscriber/premium user?
click on options
I paid the annual yesterday
can you look at your profile and see if it shows you are a premium user? there have been some subscription problems happening
Yeah, I'm premium
okay, can you send a screenshot after verifying?
this should help π
yes I've done it but it still appear on my joined room list
try to relog
I still got the same response
Hello everyone! I did complete the room Wazuh room two but the task boxes are not marked in green even though the room is 100% completed. I also want to proceed into next room Monday Monitor, and as soon as i start the machine, nothing appears. Can anyone help?
Try to leave the room and rejoin
https://tryhackme.com/room/capture the provided website does not open
i get this error
This site canβt be reached
ERR_CONNECTION_TIMED_OUT
10.10.200.183 took too long to respond.
does THM Staff @coral coral @wind wedge can help me about the issue ?
Please don't ping staff, people will help when they have time.
Hello, I'm new to TryHackMe. How can I properly understand the courses?
umm .... the website isnt loading for me.
In my TryHackMe account, why were the following learning paths removed: 'Introduction to Cybersecurity' and 'Beginner Cybersecurity'?
What's the email for site support? πΆβπ«οΈ I got my streak reset, even though I haven't missed a day this week
I have no idea where the flag is. https://tryhackme.com/room/networkingconcepts
on the dashboard there is a chat bubble in the buttom right that may help
User curl http://the name of site
could not resolve the host i tried curl the http part and the server which was lighttpd/1.4.63
That's not the server
That's the application the server is running on
The server is the IP address
that worked but i find it interesting nothing has taught me curl yet
If it help itβs great
Just some researches
yea i just bglanced at all the courses that lead me to this problem and nothing mentions curl lol.
Hi I started yesterday as a premium member and my machine will not connect. Can someone help?
sure dm me
Hi, I'm not sure if it's user error, but I'm having problems connecting to my first attack machine
They're replaced with Cyber101 path π
You're missing the Host header
How ? Can you provide some shots π ?
@bitter nimbus you can tell them your problem, they can help you better than me
thanks
Gave +1 Rep to @deft furnace (current: #1418 - 3)
ββ$ openvpn aaa.ovpn
2025-05-09 12:42:55 Note: --cipher is not set. OpenVPN versions before 2.5 defaulted to BF-CBC as fallback when cipher negotiation failed in this case. If you need this fallback please add '--data-ciphers-fallback BF-CBC' to your configuration and/or add BF-CBC to --data-ciphers.
2025-05-09 12:42:55 Note: cipher 'AES-256-CBC' in --data-ciphers is not supported by ovpn-dco, disabling data channel offload.
2025-05-09 12:42:55 OpenVPN 2.6.14 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] [DCO]
2025-05-09 12:42:55 library versions: OpenSSL 3.4.0 22 Oct 2024, LZO 2.10
2025-05-09 12:42:55 DCO version: N/A
2025-05-09 12:42:55 TCP/UDP: Preserving recently used remote address: [AF_INET]54.76.30.11:1194
2025-05-09 12:42:55 Socket Buffers: R=[212992->425984] S=[212992->425984]
2025-05-09 12:42:55 UDPv4 link local: (not bound)
2025-05-09 12:42:55 UDPv4 link remote: [AF_INET]54.76.30.11:1194
2025-05-09 12:43:55 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
2025-05-09 12:43:55 TLS Error: TLS handshake failed
2025-05-09 12:43:55 SIGUSR1[soft,tls-error] received, process restarting
2025-05-09 12:43:55 Restart pause, 1 second(s)
2025-05-09 12:43:56 TCP/UDP: Preserving recently used remote address: [AF_INET]54.76.30.11:1194
2025-05-09 12:43:56 Socket Buffers: R=[212992->425984] S=[212992->425984]
2025-05-09 12:43:56 UDPv4 link local: (not bound)
2025-05-09 12:43:56 UDPv4 link remote: [AF_INET]54.76.30.11:1194
My openvpn connection has been stuck here. Could someone come up with a solution for me?
delete old file > change vpn server > wait a few minutes > download new vpn file
Me?
ok, I'll have a try.
@KGB Thank you. I changed several servers and finally got connected
have anyone faced with such problem with openvpn?
Authenticate/Decrypt packet error: bad packet ID (may be a replay): [ #222 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings
delete old file > change vpn server > wait a few minutes > download new vpn file
Is it because the old one is expired?
sonetimes , some servers go temporary down
Understandable, tysm for the help
I am trying to access the room which named "Breaching Active Directory". In that room i have to connect to the separate Network configuration file. I am not able to get any network server there. Even though i am the premium subsriber too. I am facing the issue with this. Can you help me guys?
You need to start the network beforehand
Which server are you trying and country are you in?
how much streak is required
Which room , networks usually require 7-day streak for non-subs π ?
AD based rooms
7days streak is irritating, but bet there must be a reason behind that, anyways thanks for the intel captain
Gave +1 Rep to @ember osprey (current: #1 - 4873)
Well , running networks is probably costly π . If any user could just start it and leave it running while not actually doing anything it may costly π . Thus networks are benefit for subs and users who proved some dedication by building that 7-day streak .
yup i guessed that
keeping it free is prolly the best decision from THM πΏ rep++
hello i wanna ask I have bought a tryhackme voucher for 3 months, if I don't use it immediately after buying it, will it be forfeited ?(because I want to use it approximately 3 weeks after today I bought it)
I think it will be valid π
I've used some 3 month vouchers months after I've obtained them
does the duration not decrease?
3 month paid period starts to count when you activate the voucher π
aaah i seee, thank you for the answer, because this is my first time trying the voucher system.
Gave +1 Rep to @ember osprey (current: #1 - 4874)
Hi all, ran into a problem, OpenVpn is not working, specifically I can't ping any of the machines. I used all the commands from the https://help.tryhackme.com/en/articles/6496058-troubleshooting-openvpn-on-linux-and-mac instructions, but it didn't work for me.
MTU value failed at 1000, aborting mtu check.
I have the same thing
- create a new Configuration file for yourself.
- add the following at end of options in your configuration file
tun-mtu 1200
I tried it, it didn't work
sudo ip link set dev tun0 mtu 1200
Ps aux | grep openvpn
, check if there are more than 2 vpn connections open or not, if so, kill all of em and start new one and try again
If you are still suffering, check your firewall rules
Could it be a problem with the country ? I'm from π·πΊ
No idea
yeah , π·πΊ blocks some vpn connections π¦
Your only option may be to use AttackBox
so, i just completed the pre security pathway...is there anyway to change the name on my cert to my full name instead of my THM username?
Set your full name in account details
i did and it still generated with my full name
thm username i mean
Hmm I don't think so, I don't know how to regenerate it. My first certificate using my full name not username
I'm sorry
Maybe you can change it using pdf editor if you want to download your certificate
Unfortunately no . Once the cert has been generated there's no way to change a name on it π¦
i submitted a ticket and they told me...i made sure i changed my name tho, all good tho
Oh nice , glad to hear that π
No, it still generated with my THM username but now I know for future reference lol it's no big deal
hey tryhacke me guys i guess there is a bug in my side of site it is showing i won the diamond league but i am at 4th place and there is more 2 days remaining to complete.
What the hellβs happening with the app today
As soon as i went to home on site, i got error 500 ;-;
dude i bought a premium subscription it charged me and everything but it still says i dont have premium
Contactsupport@tryhackme.com
thankyou
now well see if they get back to me
Is anyone able to sign in on the website? Trying to sign in onto my account, keep getting a 504 gateaway error.
same thing, i need help
Ah, I reset my password and now was able to login.
i was logged in and i just got this error message
I found a workaround - if youβre trying to log in via Google and it doesnβt let you in, just manually enter your email and password, and it should work
Yeah something appears to be up with Google login..
The method you have described appears to work OK for me too π
mine is working fine but that league one is a problem
Ion know why but there is a bug on the platform
Hi
I have an issue
I have finished 19 rooms within 4-5 days of joining
Yk? there's a badge you get for finishing 3 or 4 room in your first week after joining and I didnt get that badge yet
It is a known bug , should be fixed soon , you can ignore that , just press x π
I did that. However, some things don't seem to work. Red Teaming -> Post Compromise -> Windows Local Persistence uses "evil-winrm," and that results in a series of error messages.
I just installed "ffi" myself, but it's either missing altogether or it's in the missing volume.
Hi in attactive directory room in crackign quest there is a problem with cracking hash in the task is written to find mode of hash and crack it using provided passlist so i did but no result even in walkthrough guy did it same way anyone knows what might have gone wrong?
Hi there, i subscribed to premium for a year. I want to cancel immediatly so i dont forget to cancel this sub in the future. It says I will lose access to the openvpn and premium learning content. Do i lose this access immediatly?
Also there is like a little star but no further explanation. Dark patterns all the way, right...
Oh never mind. This just means its mandatory to check this π
Is it acceptable to connect to the OpenVPN connection and just leave it always connected?
By "leaving it connected", how long are you referring to? I don't think it will cause issues or concerns though
You will retain access until your subscription expires.
Indefinitely. I was thinking of spinning up an open vpn proxy container in my VM environment, and then just connect thtough that proxy from my desktop or laptop when I want to do try hack me stuff. Was wondering if I needed to setup an on/off switch
You will have premium benefits until the paid period expires even if you cancel before that π
Try to use some online tool like crackstation.net or hashes.com
Hello
So I forgot my username in tryhackme so when I try to click on continue with google to log in it shows me
Try to reach out to support on the mail below
Will do thank you
I had the same issue yesterday. Try logging in manually. If you're unsure of your password, try resetting it
Thank you it worked when I did manually
which issue ?
when i start the machine its too much slow alsow the cpu high
also i am getting this errors wait i will send screenshot if its allow
Facing the issue in the site
A bit more detail is needed. How did you end up with this error?
Somebody knows why its failing?
I don't know , i have finished its predecessor module when i navigated to this i got the error
I usually refresh the page and it's all good.
tried it like 20 times π¦ , still the same issue
Oh , i wonder what the problem is because i have tried to start another network and its working fine but i got the issue only in that spesific network
Leave the network with the options tab, and re-join in 15 min(s).
ok thx , will try it now
Gave +1 Rep to @weary spindle (current: #2 - 3718)
Hey, just wondering how to do Paypal payments. I haven't seen anything at checkout mentioning Paypal so, I'm honestly curious
Does anyone know the solution to this
For payment issues reach out to support directly on the email below π
do you have some av software running or some browser extensions maybe ?
I am not going for payment issue as I already have an issue open. This is something I'm curious about as I've seen multiple posts regarding Paypal as payment option but I see no indication of it in checkout. I was just curious, that is all
Well only support can provide answers to payment related questions so it best to reach out directly to them π
Oh, okay, I suppose that is right
On another note, is the Announcement role self assignable? If yes, how? If not, how do I get it 'cause that role is being @ -ed during announcements
nvm, I got it
/notifyme
@ember osprey my attackbox too much slow why before was not like that
also when i run it i get some times errors when it works like volume disk somthing
Don't know , works fine for me π¦
db is already initialized on AttackBox . You don't have to run that cmd on AttackBox
Trying to login to my tryhackme account but authentication code not working and not clickable link to use recovery code. any help
Click the x, that's a known bug, but not related to speed.
yeah , you can ignore that
@weary spindle @ember osprey thanks
Gave +1 Rep to @weary spindle (current: #2 - 3719)
Tried opening the VM in the SOC simulator yesterday and it kept showing an error message
because, its an old room
I need help changing my email on my tryhackme account.
I think you should contact tryhackme
send them an email
where is their email
thank you
you're welcome
So if the room is old it won't show the points?
exactly
But still receiving the points?
no
Yeah, same here
I'm sure I received some
What room did you do?
Not even sure, I just rememver it not working
I would check, but I'm abt to go to sleep
I'll tell you in the morning
Okay then might be a bug I think, but I know for a fact that very old rooms don't give you points
I mean the room was listed on the "room points" github repo that was posted here
I still got the 200-ish points but the box was empty like your screenshot
yeah it might be a bug
which message ?
Yeah it is , should be fixed soon
Having trouble downloading wreath vpn. Can click the button but it just doesn't do anything. Have tried regenerating 3 or 4 times to no avail. Anyone else encountered this?
Have you started the network beforehand , you have to do so
Hmm. Didn't know that, thanks.
Does that mean I need to regenerate every time I stop and come back?
I don't think so
Hello I have an issue. I cant access any premium room. it says that i need to be premium and to renew my subscription but in my profile it says my subsciption is up till the 31....
I've tried now and it's still not downloading. Network uptime is 20 minutes so that should be plenty of time for everything to be up. Also I apparently need 5 votes to reset the network? Not sure who else is going to be voting?
Hey I can use the attackbox but firefox browser is not working in it. It just keeps loading and thats it when I want to use it for completing rooms
Ok I think I broke wreath completely. Just tried downloading the AD networks .ovpn files and they worked fine
try to leave the room and rejoin
then start network again
Try to reach out to support directly on the email below
nice , enjoy π π
Where events broken for yesterday? i woke up and got some out the way but it's showing 0 activity
I didn't experience such an issue
thankfully i don't think it broke my steak
no , you're good π
Maybe I'll try it again later today and send the screenshot
ok , feel free to send a shot whenever you're free to do so π
Yeah it is a known temporary bug , should be fixed soon
Sorry I am so confused why canβt we purchase premium if I am from Taiwan?
I don't think it is possible to buy sub from Taiwan , many users reported the same issue in the past π¦ . Try to reach out to support on the mail below .
I mean I want to know the reason about it, hacker community that always claims to be freedom and open, the no reason is very strange
Try to ask support on the email above
Probably some banking related problems.
@ember osprey okay, thank you
Gave +1 Rep to @ember osprey (current: #1 - 4889)
trying to do https://tryhackme.com/room/catpictures but the server at 8080 with the forum is vary slow and I have only managed to connect to the site once via the browser, restarted the machine and gave it about 15 minutes before I touched it but the same thing again. Can ping it and it is up according to nmap -p 8080 <IP>, gobister worked for a while then it also stopped responding.
Is the any problems with thm atm or just his box?
hi i have a problem that the site does not load the pics ... i am in "upload vulnerability" room in web fundemintals ... how to solve this
Right click the image, copy the URL, if it's imgur, try going to their website.
You may be blocked.
no i have to click and refresh multiple times in order to appear
but i will try
thanks
guys help.. I'am trying to connect to target machine but i get this message..also i've try from my kali also i get the message "telnet: Unable to connect to remote host: Connection refused"
which room?
This is the error message I keep receiving
your own browser issue
What's the solution?
Enable cookies?
You need to send request before the connection times out
GET / HTTP/1.1 Host: telnet
Hit enter twice to send the request
You should enter those request lines after getting connected to message in your telnet session
Didn't work, still getting the same error message
Which browser are you using?
i used the nc command in attackbox and tried to make a http get request, but when i press enter or shift + enter it justs sends the first line without letting me input another line resulting in a bad request?
It was the first one I did.. but it didn't help so I gave it up and made another box instead.. maybe it works now, I haven't checked, but as I said at least there was something wrong with it then..
Press just enter once for new line , twice to send a request
doesn't work unfortunately
does work for telnet though
You need to specify host header also
i meant the newline part
it just sends the request
same thing on a kali vm using openvpn
it even seems like it's only accepting one line of input because when i paste
host: netcat```
it ends up giving me bad request because it apparently doesn't see the host header
Can someone help with that ?
Which server are you using?
EU-Regular-2
I can change, it gonna do same thing
Ohhh
I fixed this
Maybe the config file was not good, idk, but now its working
Thanks for the help π
Getting 504 Gateway timeout in Intro to Cross-site Scripting room please help - https://tryhackme.com/room/xss
You're getting this error when you do what exactly?
nvm it fixed itself , I was getting this when i started a machine in intro to xss
Oh I usually just refresh the page and it works.
You would usually get that message if machine isn't fully up . Try to wait a few minutes a press f5 to refresh next time π
its not showing how many points i earned for all the rooms ive been completing recently π
Yeah it is a known bug , staff members are working on fixing it
Chrome
It shows a 500 error code when I try to relaunch the analyst VM
Hi.
Is there some kind of hiccup β maybe a license issue?
I'm in the 'Servidae: Log Analysis in ELK' room, and Kibana shows 'Kibana server is not ready yet.' It's been like this for 40 minutes now. I already terminated and started the machine again before this current try.
Also Attackbox has some. Three pop-ups: "Unable to mount 67 MB volume. No .Filesystem or .Encrypted interface on D-Bus object.", "Unable to mount 77 MB volume. No .Filesystem or .Encrypted interface on D-Bus object.", "Unable to mount 46 MB volume". No . Filesystem or .Encrypted interface on D-Bus object.
hey, i've been wanting to do the memory acquisition room for two days by now, the first time it didn't want to give me an attack box (remote desktop unavailable) and now i have an attack box but i'm not sure whether powershell actually executes my command. could someone tell me whether Get-Filehash is supposed to run for several minutes please?
I'm not very used to Windows. Or Powershell. Am I doing something wrong? Is the room buggy?
(Apologies if this is the wrong channel to post this in, I tried to figure out where to put it, here seemed correct.)
I am not able to get this bage it shows error
yes it is supposed to run longer for those biger files
Why does the THM official victory email look like a threat
That is a mafioso way of saying that if I've ever seen it
It certainly looks like something 
I am running into an issue while connecting to THM with openvpn. I can reach the ip of the box provided by the room however i am not showing connected in the access browser. Is there something I'm missing?
Can you access http://10.10.10.10/ ?
@ember osprey Yes I can
Then everything is good . Access page on THM doesn't work properly
Thank you!
Gave +1 Rep to @ember osprey (current: #1 - 4900)
@ember osprey I still need help with this
Enabled cookies but it still didn't work
Got a 500 error code when I tried to relaunch the analysis VM
yup buddy mine to i am not able to see my points
do you have any browser extensions/ad-blockers enabled ?
I have some extensions on my chrome browser if that's what you mean
Try to disable them temporary
Oh okay
hi
did tryhackme reset challenges progress for everyone? I see 0 challenges completed?!
even I can see some challenges are done when I check them individually
Top 1% missing?
huh, odd, I have it
Just someone know why we don't have points showing after finishing a room please ?
it's a known bug π
okay thanks, do you know or think it will be patch soon ?
Gave +1 Rep to @tough aurora (current: #190 - 45)
not sure, because I'm not part of the tryhackme team
it is a known bug , staff members are working on fixing it π
Yeah , I don't have it also π
No , works fine for me
Ok thanks π
???
Try refrech the site, with F5 and try again
does not work. 
or ctrl f5 to clear site cache
eh didn't work either 
Which room is this?
Hi, is there THM infrastructure around APAC ? since the last time i learnt THM SOC Level 1 path, the VM speed was too slow 
can somebody help me with my open vpn
i tried to connect it but the issue is my linux is showing me that its connected but the thm access page is showing not connected
Well it has been a while and for me it never worked so am using the included VM for now
LazyAdmin
Hello guys, what these errors mean?
Just press ok and you'r done don't worry it won't affect any of the functions
Please try again. Should be working again now
ye, i wonder if is my pc or what, because i dont understand which kind of errors are
Nah, It's the hardware of the servers the VM's working on so it showed these messages.
ah ok thank you π
Gave +1 Rep to @hot hatch (current: #1880 - 2)
Mention not bud
Well it depends . Maybe it is out of their power
I guess. Stuck with THM Free rooms for now. Guess it means no path completions
Just for the record - the support person tried to help me, it's not on them
They said its a bug they're working to fix
Yeah works now. Thanks. What was the problem?
Gave +1 Rep to @crystal marlin (current: #5 - 1864)
Just some backend issue
Hello everybody in dashbord sections modules i don't dΓ©ploie VM but i three VM open . How do we stop them because I don't know which rooms they are anymore?
You can check the list of running machines on this link
https://tryhackme.com/api/vm/running
I did the " KQL (Kusto): Introduction " room and was able to get it 100% complete as shown in the image above, but when I check on the recent rooms it is only showing as 87% complete as shown in the image. I have checked all the tasks and they are completed.
The Wgel CTF vm machine wont launch
Thanks
Gave +1 Rep to @ember osprey (current: #1 - 4909)
How to upload photo here, there is no option showing for sending image ?
ctr + c the img and ctr + v in the chat
Not working
ok budy
You will have to verify first π
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
Not just points, even new Badges you earn are bugged, all new bages you earn are replaced with Badge that you earn during completing 4 rooms in first week of joining
I'm getting this message "Static site info not found" when trying to open a static site
Hey there! We are aware of that and trying to have that fixed shortly!
I have the same, but it should be a windows machine in Disk Analysis & Autopsy room. I also tried to open through machine's browser and nothing...
Just try re-opening it
How Am I supposed to use the online tool PhishTool, as required in the lab, if my spawned machine does not connect to internet?
I'm currently doing the Threat Intelligence Tools lab
I was able to partially solve the problem for the task 5, reading the header of the email.... but for the task 7?
I'm getting the same issue, and no amount of reloading the page seems to affect it
Thank you.
Gave +1 Rep to @crystal marlin (current: #5 - 1866)
Hey guys. So I am using OpenVPN to hopefully full-fill the tasks for the phishtools in the Threat Intelligance Tools room. Since I am not able to access the website in VM using Firefox, I will see how I can complete the task. Now, since I have OpenVM running on an open terminal, how do I go about in accessing that room?
Do I telnet somehow to the attackbox?
did it many times
Even used different browsers
Maybe you could drop a screenshot so the Mods can help you
You don't use phishtool, you use Thunderbird.
please read the task content.
@weary spindle Oki dokes rhx
I have issues with my billing. I changed cards since my old one expired, the card got charged but kept getting an email they cannot charged my old card, so now my account got terminated but I just paid for this months subscription
where can I get help for this? I notice there was not support email in the site
For payment related issues , reach out to support directly on the email below
emailed already, thanks!
Gave +1 Rep to @west chasm (current: #64 - 139)
just be aware that it may take a few days for staff to respond
It didn't let me put a screenshot in this channel
You have to verify in order to upload images
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
I have a problem. I have VPN access but I am not able to ping the challenge box
I have the same issue when I use my cellular network, nothing works. But when I switch to fibre connection, it works perfectly.
which box
lesson learned. I pinged 10.10.10.10 but I cannot ping the box
Guys, Iβm trying to do Task 5 for Metasploit Exploitation, and it requires me to dump hashes through Meterpreter. But every time I interact with the session, I just end up in C:\Windows\System32 on the target. Is that how it's supposed to work?
used :
ms17_010 & windows/x64/meterpreter/reverse_tcp
so you used Eternal Blue?
use meterpreter payload to get the shell
did you pivot into another service already?
or upgrade it to meterpreter with post module
Not able to ping the box IP. Facing issue with old rooms. Like Peak Hill, hc0n Christmas CTF, etc.
Tried with my premium attackbox, tried with another userID using their openvpn.
Able to hit 10.10.10.100 and other internal IPs, but these old rooms are not working, not even ping, web, nmap, nothing.
The problem has been faced since the past 24hrs. New rooms like "include" are not affected.
guys, check in your accounts as well. Me getting worried. I halfway did a room, day before yesterday, now the same room's new IP isn't reachable
@crimson mulch can you download another openvpn conf file?
Did. Tried with all the servers. Same.
where are you from?
India. Also, IP should've reachable with attackbox, but still nothing
not even from attackbox?
Nop. Since past 24hrs π
did you use the openvpn in the attackbox?
you aren't supposed to, so I'm just checking π
Tried that as well. π€£used curl --interface tun0.
Still same.
so you tried and also did not try openvpn on attackbox?
Openvpn in my local machine,
Openvpn with my config file forcefully running inside Attackbox.
Tried both cases. Nothing.
Could you guys pls try "Peak Hill" room from your side once. Whether it's reachable
alr, let me try π
Thanks. π« Appreciate the efforts.
it is possible that because it is an old room, the machine does not work anymore
Same with other room.
"hcon Christmas ctf". It literally worked the day before yesterday. I was doing it.
Now it doesn't. π₯²
Wut to do now? π₯²
let me check the other room
it is also possible that there are some bugs in the site that won't allow us to connect to some of the target machines
Wut next? How to let the THM team know about this issue? π₯²Want to playyyyy ππππ
they probably know about this issue, but you can email tryhackme
Got it. Email-ing them right away!
Thenks Joo. For your support. I thought, I was delulu.
no problem π
what the problem?
@crystal marlin
It's only on this room
I've pinged admin , he will reach put to you asap π
When do you get this error?
Like on trying to press Join Room, or like when trying to start a VM, or was it just a one time occurrence?
When I click the "Join" button, it successfully joins me, but no tasks are displayed. Then, after refreshing the page, the error appears, and the tasks still donβt load.
I try anther room and it works fine
only the problem in this room
Can you try refreshing with CTRL + F5 to see if it still happens?
Still happens
And still no tasks are being displayed?
Yes
Hmm
Can you go to https://tryhackme.com/api/v2/users/self and send me a screenshot of that via DM?
I try anther browser and still the same
ok
Hello guys, I have a problem with my VM. I started getting this error after working on a challenge. Since Iβm a beginner, most of the time I donβt really know what Iβm doing, so I think I caused this errorβbut I wanted to ask if anyone else has had this problem. Iβd like to try to fix it, but Iβm afraid I might break the VM even more. Has anyone seen this before? https://imgur.com/a/zv0IXej
You can safely ignore those. It's something with the VM itself causing this, but shouldn't give you any problems.
Ohh, ok, thank you π The VM is working fine for me; I have no other issues, so Iβll just keep ignoring it.
Gave +1 Rep to @crystal marlin (current: #5 - 1867)
You can verify in order to upload shots durectly to Discord π
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
Hi guys, I have a problem with the THM VPN. Whenever I start the VPN it is not working more than half an hour after that it says "unable to reach the host" or something "no route to the host"
Can anybody help with that
Try to change vpn server and download new vpn file , delete old file beforehand
Yeah I tried that but still it is not working
where are you from if i may ask ?
India
I am also having same problem
try to use some us based server or indian regular
Ok
Ok
Hi
Even after using other vpn it is still not working
Neverminnd found the flag
Please don't post flags in chat.
ok thanks
@weary spindle here i am.
for silver platter problems (maybe) π
can i send a picture from here?
You need to verify to upload shots
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
are you connected to thm network via vpn ?
check it now
ip a | grep "tun"
I will ask for help again: I am trying to do Active Directory breaching room. I am connected to proper vpn and I can ping IP of server (I dont loose packets)....yet I cannot get to webpage ntlmauth.za.tryhackme.com/. Could anybody help me resolve the issue?
I changed it to us vip it was working fine earlier today but now that also is not working
Same kind of things are happening with me, nmap scan returns no results and ping also isn't returning anything
I tried with several rooms
It seems there is an error for one of the questions in task 5 of JavaScript essentials. The answer for the invoice.html file I.E. how many times will "Hacked" be executed, should be 3 times, not 5.
I'm experiencing the same problem.
Hey, I'm sorrry if the question was already answered but is it possible to pay premium for only one month ? Thanks
Yes you can choose between monthly or yearly
Because on the website they say we can buy monthly but every month we are debited until one year, but it is possible to pay just one month without pay until one year ?
I'm not fully sure where you reading. But if you check here: https://tryhackme.com/why-subscribe and choose the monthly option, you can cancel monthly. Meaning, you could purchase it, and afterwards cancel to stop automatic renewal.
Okay it was the answer I was looking for, if I can cancel at any moment thank you @crystal marlin
Gave +1 Rep to @crystal marlin (current: #5 - 1868)
I think that the question is about the script on the machine not the one from that image π
Not sure if it matters looks like a slight tpyo on: memoryacquisition Task 2 Techniques, Tools and, Best Practices under the Conclusion area
"YYou" have discovered the
You can report it in #1333993673381253162 channel π .
the last question of the MITRE module on task 8 i cant freaking get the answer and it pisses me off
they ask for which platform
Try to ask in #room-help channel π
Hello - is there a problem on the network tonight? I've tried to connect to two room's VMs from both my personal attack box and the THM attack box, and both nmap out as all ports filtered. I can ping my personal attack box from the THM attackbox and vice versa, but cannot seem to access the launched machines, in any way
which room ?
Old ones - Jack and hc0n Christmas CTF
At first I thought the problem be with my network, so I launched the Attack Box for the first time in several decades, and experienced the same problem there
@crystal marlin
Can anyone help me, I connected to .ovpn, in the terminal it connected, but when I type in the browser (10.10.10.10) it doesn't work
I already installed it, reinstalled ovpn and nothing (I even changed the server location) and nothing
Open up new terminal and run this command sudo ip link set dev tun0 mtu 1200
Glad that I am not alone
@ember osprey I do not know if this is considered or not, but I was going through a bunch of labs, and in one of the labs (Kenobi), I saw that privilege escalation was mentioned.
At first, I exploited the machine without looking at what I was supposed to do. I accidentally found another way for privilege escalation, I thought to report you guys, and if possible, then add it as a secondary or bonus method!
For the exploit, I have my own single-file exploit on my GitHub, and I also have a PDF PoC for what I did. So what can you do here? If you consider this, then I can talk to someone personally on this, so do let me know.
Yeah. Same. Dropped THM an email yesterday for the same. @ Joo helped for confirming the issue.
Wdym ?
There is a lab in THM named Kenobi
THM has a privilege escalation mentioned for that lab, but during my research on the lab, I found one more way for privilege escalation. So, I wanted to know if THM can add this method to their walkthrough of the lab (Kenobi) as a bonus or secondary way. Additionally, I do not see any write-ups on this new method.
Should I mail them directly for this?
You can submit your own writeup
Okayy thanks!
Hello I am having serious problem, My attackbox is just dying after few minutes
I have tried several times
is other room ok? only ad breaching? you're a premium user, right?
maybe It could be a network problem...or a server problem....
Didn't check in other room
I am changing /etc/resolv.conf file. Can that be problematic ?
idk well about attackbox, but changing configuration file sounds problematic. does that fundemental for solving?
It's not given in instructions but without that I am not able able to access web app
I think attackbox has no access on web....so that may be ther problem, I think
to make it clear, how about just turning on the attackbox and left it for 5-10 mins? if it has problem, thats maybe server or network problem. if not, changing file was problem and you should find other way.
Yeah, I am doing that rn
hope it works
It's been 10 minutes now I'll change the config file and will see
I think I figured out the issue, I am also restarting the NetworkManager service but without restaring it I am not able to access the webapp in the room π¦
so the config file was the problem?
So, I am stuck once again
Config file is fine but restaring NwetworkManager was the issue
oh. that was the issue. maybe you should use vpn....
I might try to do the room in my own VM. But it sucks that I can't use Attackbox for this
Why are you changing resolv?
Coz I am able to access ntlmauth.za.tryhackme.com webapp
I was just troubleshooting and it worked
Attackbox died again
Which room are you doing?
Breaching AD
Which task?
3rd one
What is your THMDC IP?
10.200.55.101
Vote to reset π
I already did
Did it hit 5/5?
It's 4/5 right now
Needs 1 more
Nvm I am now abke to access the website. But I was doing the same thing for last 3 hours, Don't know what's happening
or maybe it was DNS configuration problem?
Yeah but there's only one command we have to run as per instruction and I was doing it everytime
well, at least the problem is solved..... I hope your work go well.
I hope so, Thanks for the help
Gave +1 Rep to @full solstice (current: #1887 - 2)
Hello everyone, I'm Essam Aldeen from Iraq. I hold a master's degree in Cybersecurity and have extensive work experience. I run two startups and manage several social media platforms. I'm looking to create something impactful with TryHackMe by launching a new community for the Arab world. If anyone from the team is interested, please feel free to contact me to discuss it further. There's immense potential in the Arab world.
Hey guys! I have my monthly THM subscription paused till 14th May as such. Got the email, that itβs resumed as well
But whenever i visit the THM website, i keep getting the prompt to βGo premiumβ
My subscription renewal date showed up as 14th June apparently
Where can i raise a support ticket?
Maybe Murphy gets triggered for me too when I write about Redline loading takes one hell of a time and I actually think about answering with a walkthrough to stop wasting time
On the email below π
Hey there! If you could spin up new instances of these VMs and try again. It should be working now π
It happened with me also in rooms like coldbox and couch
Are those fixed too?
Let me check those
I think there are some more rooms that are having the same problem, including different ctf
Yes, that issue mostly affecting some older rooms. If you come accross any, please let me know π
Should be fixed for the couch room now π Could you share the room URL for the coldbox one, as I couldn't find that room?
Ah, right, thx π
Gave +1 Rep to @ivory spruce (current: #12 - 818)
I remember that room as I had to try it multiple times before I saw what I was missing. π€£
alr, I'll let you know (without pinging you) of any rooms that have that problem
one of the rooms not working is the different ctf room (hard, red)
Okay the ColddBox one should be working too now
But you didn't gave up πͺ
How would you let me know without pinging me π ?
uhh, so I should ping you?
Yes please, otherwise chances high I miss it π
cool, I'll let you know π
currently, the only one I know if that is not working is the hard, red room Different CTF
Ok thanks π
Gave +1 Rep to @crystal marlin (current: #5 - 1869)
Fixed β
nice, thx!
Gave +1 Rep to @crystal marlin (current: #5 - 1870)
i'm receiving error 500 when i try to upgrade premium yearly, just monthly works
just reporting
Try to reach out to support on the email below π
okay thank you
Gave +1 Rep to @ember osprey (current: #1 - 4925)
Hey i get an Host key verification failed, when i try to connect via the Attackbox to my Target Machine. Iam in the Room Wondows Command Line and thought i did as told π
Can you please verify and provide a shot π ?
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
π«‘
Ah ok... Iam stupid i didnt typed "yes"
Thanks...
Everything ok now π ?
Yeah works fine thanks for your Help π
Gave +1 Rep to @ember osprey (current: #1 - 4926)
is it an actual thing?
I don't think so
guys just a heads up, Poster and Smag Grotto machines are still down, same issue like last night, no response to ping and nmap returns nothing
https://tryhackme.com/room/smaggrotto
https://tryhackme.com/room/poster
Reported to THM Staff
wait, let me ping Fontaene
@crystal marlin according to GDE SU ORTACI the Poster and Smag Grotto machines have no response