Temp tower issues now lol
#Temp tower issues now lol
ancient sequoia
open mason
What are you hoping to achieve with this "test"? Temp towers are not a very useful calibration aid. They rely on too many variables already being perfectly tuned.
There is also a lot of other information missing- material type (presumably PLA given the temp range), toolhead type etc.
storm storm
Well those lips never showed up before... id like to figure out why they're thete all a sudden
The temp range is on that tower. And it is petg
A4t revo voron with a wwbmg
Stock voron speeds make my bridging ... not bridge at all. That is before I slowed it down. ..but i never messed with slicer settings. I did a bunch of changes in gantry but nothing that should have effected cooling at all.
New motors and 5160 drivers for a and b.... Belts and square and rack
open mason
have you done any calibration with a more forgiving filament than PETG?
storm storm
I dont honestly own anything other then petg and abs.
I have been printing with only petg for over a year now....
This is not an issue ive seen with temp towers.... im thinking its related to speeds....
Has to be no.
?**
open mason
speed, flow, cooling use, many factors.
my best suggestion is to print some more normal calibration tests (ellis guide, voron cube etc) and show them off in #slicers_and_print_help where this probably should have gone in the first place