My take on the popular dual 4010 part cooling configuration.
Github: https://github.com/Armchair-Heavy-Industries/A4T
License: CC BY-NC-SA 4.0 (http://creativecommons.org/licenses/by-nc-sa/4.0/)
#A4T: [A]nother [4]010 [T]oolhead
errant anvil
carmine radish
Big fan of the A4T! I've used them in both of my 2.4s for thousands of combined print hours at this point, as well as in my Pandora's Box.
Being able to fully assemble the toolhead off printer, wiring included, is a huge quality of life upgrade IMO
