#V2.4 Gantry Clearance Question

3 messages · Page 1 of 1 (latest)

fresh oasis
#

Quick question: What's the minimum distance between the bottom of the rear gantry extrusion and the deck panel on a V2.4 350mm with Stealthburner at Z=0?

Planning cable routing and need to know clearance. Thanks!

hollow onyx
#

I just quickly measured a printer here at about 78mm.

#

It is going to vary a bit between builds (like the thickness of the bed and it's mounts, what hotend you're using) so if you need something very precise you'll have to build your printer and measure it yourself.