#I've been fighting the VFA's shown in the picture of the print.. I have tuned and tuned and attached

6 messages · Page 1 of 1 (latest)

topaz barn
#

👋

#

Thank you for all the pictures

#

However, a picture of the front with the exhaust visible, as described in the guidelines, is mandatory for us

#

So please add one and make sure please it has good lighting and camera focus before uploading it here

#

Once done we will need the following:

  • klippy.log which has been rolled over before uploading here (rollover can be found in the Machine tab, bottom right corner where u can download logs and then its the button with 2 arrows circling)
  • the printed objects sliced with the settings used, exported as a .3mf from your slicer + which slicer was used so we cam properly import it
kindred halo
#

We can delete this thread.. I was dumb and had my IS settings not formatted properly