Jankr0 - The V0 That Shouldn't Be

[real moat]

Started off as a V0 kit from Siboor as part of the MakerBogans group buy (https://www.siboor.com/product/siboor-voron-0-2-r1-3d-printer-kit-color-frame-color-abs-parts/). Over time, upgraded to my own weird requirements/wishes because i could.
None of the extrusions are identically toned but work just enough together. They are:

Siboor blue frame
LDO blue tophat
LDO blue door

LDO blue's are different as they were anodised in different batches. The tophat mostly matches the Siboor blue.

LDO Tophat kit was needed to suit the fridge door mod, as sadly i couldn't find a kit that was cut for 80mm tophat.

Built as follows:
URBI with BTT SFF 2.
https://www.printables.com/model/408745-v0-upper-rear-bowden-inlet-urbi-for-voron-v0
Ldo Polyimide Bed
https://west3d.com/en-au/products/ldo-polyimide-heater-and-200w-psu-for-v0-v0-s1
Slideswipe
https://github.com/chestwood96/SlideSwipe
Dragonburner v8 w Rapido 2f
https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner
Orbiter 2.0 (for now)
https://www.orbiterprojects.com/orbiter-v2-0/
EBB36 1.2
https://biqu.equipment/products/bigtreetech-ebb-36-42-can-bus-for-connecting-klipper-expansion-device
U2C mounted to to motor panel.
https://www.printables.com/model/1001970-v02-ab-plate-umbilical-pass-with-optional-u2c-moun
130 degree bed camera
https://www.printables.com/model/450421-voron-0-raspberry-pi-camera-130deg-clone-mount
"Mini Fridge" Door Mod (LDO Kit)
https://github.com/TheVoronModder/MiniFridge
Hartk/Maverik Stealth Skirts
https://github.com/TheVoronModder/MiniFridge/tree/main/mini_fridge_skirts/revised_hartk_stealth_skirts
Hula Feet Addon
https://www.printables.com/model/1069596-extended-feet-for-the-v02r1-skirt-optional-hula
Electronics Panel Management
https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system
M4P with CM4 Lite (couldnt source a full CM4 affordibly at the time)
https://biqu.equipment/products/manta-m4p-m8p

Z-Motor Cover
https://www.printables.com/model/517162-voron-02-z-motor-cover-plate
Chamber Thermistor
https://www.printables.com/model/499851-voron-v02-chamber-thermistor-mount
Metal Toolhead Carriage
https://store.dremc.com.au/products/v0-2-metal-toolhead-carriage-for-v0-2-by-honeybadger
Overkill LED's
https://west3d.com/en-au/products/double-density-rainbow-stealthburner-led-upgrade-overkill-edition
Nevermore (mod allows a better door imo)
https://www.printables.com/model/784574-nevermore-v6-alternative-cartridge-door-mod-straig
Knomi Krigami mount
https://www.printables.com/model/547224-ft-knomi-krigami-mount
Rear Panel to suit 140mm fan
https://www.printables.com/model/1028313-voron-02-lower-rear-panel-140mm-noctua-nf-a14-fan
Waveshare 2.8" LCD
https://www.waveshare.com/2.8inch-dsi-lcd.htm

Filaments Used:
Main: Siddament ASA Blue
https://siddament.com.au/products/blue-asa
Accent: DREMC ASA Teal
https://store.dremc.com.au/products/dremc-asa-filament-1-75mm-1kg?variant=44488507588777
Toolhead: DREMC ABS Burnt Titanium
https://store.dremc.com.au/products/dremc-abs-sparkle-filament-1-75mm-1kg?variant=43443156287657

Special thanks to:
@vast jolt - assisting where i couldn't join a build session (love your https://discord.com/channels/460117602945990666/1325003784627294218 btw)
My loving partner - Putting up with me being not home to build this with a mate who is closer than family
Jecks Wife & Kids - Thanks for letting me steal your hubbie/father. You can almost have him back
UberEats - Nobody questions food deliveries at odd hours

This was changed out dw

More images to come, just looking through camera roll (look at #1325003784627294218 for projet start date haha)