fossil osprey
Hi,
I'm working all day on my input shaper and removed most critical issues for X axis but still small bump and not sure if it can stay or it might be something easy to handle.
Bigger problem I have with Y axis. I have a hard time to locate root cause. Any tips were to look for reason of such graph?
I have 300 without tap with drag chains.
Also doing review of https://github.com/Frix-x/klippain-shaketune/blob/main/docs/macros/axis_tuning.md#toolhead-or-tap-wobble
fossil osprey
I think I have my reason for those graphs, I have problem with Z belt tension. Need to work on this.
New graph after initial adjustment.
fossil osprey
I hope moderators have noting against my small follow-ups on the issue, hope this might help someone.
I had problem with one of the belts, tension was uneven at the top and the bottom. I have discovered mistake during gantry build. My extrusions on X axis were not setup according to the manual (were not flush with the mount point at back of the printer).
After adjustments, Y has changed a bit and acceleration for X dropped a bit.
