I have fysetc klicky pcb and btt sb2240. My problem is the wiring actually. I'm beginner of this. So, the picture of wiring is the best solution for me.
#- Klicky Pcb and SB2240 connection
urban jewel
Hey @sacred dagger - the cabling required is in the documentation for the SB's. Let me grab it for you.
Regarding the voltage, use whichever one you have voltage for. I would say just use the 24V one, less chance you pop it !
https://github.com/tanaes/whopping_Voron_mods/tree/main/pcb_klicky
This is the best thing to follow
sacred dagger
I want to use 24v. Should I need solder any cards? For 5v needs solder I guess. Btw, I didn't see wire guide to the documentation :/ As I said I'm beginner. Maybe I miss something.
young rock
I want to use 24v. Should I need solder any cards? For 5v needs solder I guess. ...
If you look at the green silk screen it shows G, S, and V+ where the 3pin JST is might be hard to see link above has a good picture of the silk screen under the header "Attach the Magnet" i believe you need to run it to a endstop port on the SB2240 as its a switch but you can ask if you run the Klickly pcb to the probe port on the SB2240 in #can_and_usb_toolhead_boards