tame bridge
I made this for my mom's kitchen. It's got a presence sensor, connects to a monochromatic LED strip and has 2 buttons for changing brightness. The 3D case is based on one I found on printables, but I changed the shape and reversed the direction of the board and added the button press functionality with those slits that look like anime eyes
zinc sail
stl files?
tame bridge
Here are the STL files. I forgot to mention that the button portion was made by soldering a 3x6x5 2 pin button to a section of perf pcb I cut
And for the usb port, I used one of these...
https://www.aliexpress.us/item/3256804403626686.html?spm=a2g0o.order_list.order_list_main.87.57101802efu2GF&gatewayAdapt=glo2usa
They are just usb-c breakout boards with pre-soldered 5.4k resistors so it will pull 5v from PD chargers. It's being used to power an LED strip and I read the built in 5v pin of the D1 mini can't handle that much current, so I wanted to be safe.
I also ended up using some trips of perf board as terminal blocks for all the ground attatchments