waxen rampart
Pig iron has successfully dripped from the blast furnace into the crucible. From there, charcoal and a bellows is used to keep the pig iron molten to attempt the following:
Casting inside the crucible into a normal ingot mold
Casting inside the crucible into a fire ingot mold
Casting with a casting channel into a mold table holding a normal ingot mold
Casting with a casting channel into a mold table holding a fire ingot mold
Casting with a Steel Mechanical Pump and Hand Crank into a mold table holding a normal ingot mold
Casting with a Steel Mechanical Pump and Hand Crank into a mold table holding a fire ingot mold
Removing the normal ingot mold from the mold table both with the casting channel and mechanical pump to click manually
Removing the fire ingot mold from the mold table with only the mechanical pump to click manually
Whenever I attempt to remove the ingot from the mold by hand, it spits back the message "Contents have solidified!" and at this point I can't think of any other ways to attempt getting the ingots. Any other ideas are appreciated 😅
marble cobalt
tough dagger