This install is several months old and I haven't had any issues until today. It is NOT dual booted. I hard wire for internet and I only noticed something was wrong when my Bluethooth starting acting up and not connecting. I have google searched as much as i can, but I cannot find any posts that are my exact issue.
The details (From my own research I believe this is all the important info):
https://paste.rs/kgWZW.txt
To summarize what I can tell, The hardware is seen, the correct firmware is determined and loaded, then trying to initialize the hardware fails?
The wifi module is loaded. If I unload and reload the module I get the same error in dmesg.
I updated the kernel on the 20th from (6.12.9.arch1-1 -> 6.12.10.arch1-1), and it worked fine until today, so it is not likely the issue.
Most of the posts I could find were about dual booting with windows fast boot, and an error code -110. This is not the issue on my machine.
I believe the important line are
[ 17.304533] iwlwifi: No config found for PCI dev 7af0/0000, rev=0x430, rfid=0x3010a100 [ 17.304546] iwlwifi 0000:00:14.3: probe with driver iwlwifi failed with error -22
but I cannot find anything regarding this, and I may be entirely wrong on what Is causing the problem.
Any and all help is greatly appreciated.
a simple, no-frills, command-line driven
pastebin service powered by the Rocket web framework.