I went through the guide found here on my RPi 4B. When it boots up, the green LED occasionally blinks but it doesn't connect to network. I don't have access to micro HDMI adapter so no display is connected. I also don't have access to UART.
#[SOLVED] Raspberry Pi install
cobalt gale
cobalt gale
well I got serial working
just like me fr
it fails on this and it just then repeats again and again
but it boots into the card fine
the full log
cobalt gale
alright so I had to follow this and change both booti lines https://archlinuxarm.org/forum/viewtopic.php?f=67&t=15422&start=20#p67299
after that i booted with no serial, had to change from /dev/ttyS1 to S0 in boot.txt and regenerate it again (mentioned in the forum post)
and I had to modify fstab, change it from ...0p1 to 1p1, not everyone had to do that
then I followed this guide https://gist.github.com/TheZoc/849a82d3eed219998cd82fb4040607ae and right now I'm updating through ssh
but it should be done and working
it was a journey
cobalt gale
[SOLVED] Raspberry Pi install
cobalt gale
gotta flex the neofetch pic even tho nobody's probably seeing this
