mild cloud
I bought the same 2x8gb ramkit to upgrade from 16gb to 32 but after putting them in. My pc restarted a lot, couldnt even go trough bios, after a lot of restarts I made it into windows, but my RAMS where locked to 1887mhz instead of the 3200mhz.
Tried to enable again XMP, but after turning it on couldnt boot into windows again.
What could be the problem?
The two ram kits:
My motherboard is an Asus rog strix b450-f and the cpu is a ryzen 7 2700x
worn needle
well there not the same
one is good b die the other is bad c die
and duel rank is harder on imc and if your board is t-topology its better with only 1 sticks per channel
mild cloud
Then I shouldnt and cant put these two together?
worn needle
go to oc chat for trying to stabilize it
its bad to mix dies and your cpu imc might not like duel rank
at that speed
mild cloud
Then should I just return the new ones and get the same die type?
Or is B die that much better?
worn needle
well you cant find out what you get until you get it
so you need more capacity
or want more for the future
mild cloud
Both, mainly I want to build from an old pc that I got a home server and I need an 8gb in that, so I was interested in getting a 3rd ram into my pc, but I dont know if its possible even
worn needle
so 3 stick in pc1 and one a pc2?
mild cloud
Yeah, that was the plan
worn needle
if you have 16gb in one channel the 8 gb in other you only get duel channel upto 16gb the bandwidth tanks for the last 8 gb
its better then hitting the page file but not good
mild cloud
I have a dual channel 2x8 now and want to get in another spare 8gb
worn needle
well you lose the advantage of duel channel for that last 8gb
and it will make it harder to run higher then 2933 ram
if you want better then jedec but likely to be stable try droping speed to 2933
or ask the overclocker for help trying to get 3200 stable