#folding-and-boinc
1 messages ยท Page 50 of 1
Disable Turbo Boost
I'm running Ryzen, and the clocks aren't really boosting at all, same as before, but yet same temperature for half the threads
PBO?
I'm...actually getting less PPD with my CPU running due to the increase in temperature in the case throttling my GPU clocks down

sounds like you need a better case
also, hitting 80c on both all and half of the core.. sounds like a cooler problem
I don't necessarily think that's the problem, more of "I need better CPU cooler"
well for the CPU yes
but they just said the CPU is making the GFX card downclock due to temp
that says to me the case cant evacuate the heat fast enough
Yeah, my GPU starts dropping clocks around 62C, which it only hits when CPU is running

hmm it shouldn't drop that much though
Though to be fair, it's running about 20% higher than stock clocks due to undervolting/overclocking
from what i can tell only several 100 MHz changes should hurt PPD
All I know is that it went from 1.2M PPD consistently on GPU, to 1.1M PPD on both

After pausing CPU, it went back up again shortly
I would buy a better CPU cooler for rendering and what not, but I also need to buy index controllers, so the cooler will have to wait for the time being, while I use GPU folding in the meantime
Oh, 2.33M, extra spicy
Liro what's the cpu?
my 8700k is pulling 250k PPD?
Ryzen 7 2700X
???????
what
you have servers folding on same account page ?
thats every computer in my house
actually the antec server is the i7 4790k box with 2 gpus
@smoky wing the stock cooler for the 2700x is pretty good, it may be cheaper and equally effective to just get another case fan and improve airflow. are you overclocking?
ah how did you get them to show like that
Add
its at the bottom of the window
on the left
you have too allow your IP in the client first though
ya past my skills with networking
it isnt even really networking
I have no overclocks on my CPU, also my case is rather large, with lots of airflow, nothing overheats unless I push the CPU to 100%
do you know how to find your local IP address?
It's only the CPU that gets toasty
Ah makes sense, alright
@hushed bobcat nope my neetwork involves my plugging comps into my router lol
i dont even know ghow to forward a port without fucking that up
Yeah, I don't like things getting higher than 80C, and getting deafened by my CPU cooler lol
@hushed bobcat MMM, 8kWh per day ๐
My GPU is only using 230W, which is actually surprising considering it uses over 300W in game

That isn't too bad
problem is i have 5 computers running full tilt 24/7...
Yeah the gpu won't use all parts to fold so will be less than max power for sure
USA
Midwest
its 70F out and i have the windows open and the Attic Fan on to keep the house cool W/O turning on the AC lol
It's still moderately cold where I live so the extra heat is welcome here haha
Also just checked, my cost to fold is less that 200/year. I'm pretty ok with this
Has anyone else been getting way more WUs lately?
hey that's cheaper than a 1$ drink at mcdonalds
actually yea
i was pretty dry this morning but now i seem to be getting WU one after another
as i say that....
my ryzen machine has no WU
no cpu WUs, but my gpus been running non stop today
-13c here in cad and i have my vents blasting fresh cold aire on my systems
makes me want to duct straight from a window to the front of my PC
-13ยฐC? Where are you then? I'm by Ottawa, and it's 10ยฐC
nice
also
the PPD on my 8700k just went to 291k
?
i think my client is drunk
question, does anybody know if there is an explaination for what the server stats page means? https://apps.foldingathome.org/serverstats like the CS, status etc
CS = Collection Server
if you mouse over it gives some descriptions
not 100% sure on the difference of the Types
WS and AS
WS is probably Work Server
AS = Assign Server?
most likely
well the host name is assign1.foldingathome.org
Type is AS
i know CS is collection server and WS is Work Server
seems logical to me that AS is Assign server
yeah, but they have 11 assign, 10 accepting servers if you look a bit further on that row
ahh under status
yeahj
you know
i bet its a node system
the 2 assign's manage the jobs for all the Work Servers
i wish you could link systems together into a main system to fold with
no offence, but there is a reason why I asked if there is a proper explanation of the page, cause I can guess too
@rich depot you can just run your username and passcode on each system though?
@rich depot Well i'm pretty sure i'm right
good for you
assign servers give split jobs to Work servers, Work servers give jobs to us
you can run the info the same but each system works on separate wus i want all my systems hammering wus together
the collection servers also probably talk back to the assign servers
@rich depot doesn't that kinda defeat the purpose of F@H though?
That would be a programmers nightmare @rich depot . Cause having to split up jobs that are already split up.. getting way to complex
we did this with mioning crypto and it worked
proxy server
i mean its whole deal is taking huge work loads and splitting them up into smaller work pieces for everyone to work on
hmm
wus get done faster with more accuracy
there is no benefit to have wu's done fast though
I've just do a 40k worht it credit with mu GPU and It didn't count
you slam a wu with say 4 1070s it would be done so fast with zero issues
i agree with bluehero that sounds way to complex
you would probably need a PC JUST to manage all that
there is no reason to go fast on old machines that then stumble
there are so many wu's, that having to wait a couple an hour on a wu is not a problem, cause there is no difference between doing 4 wu's that take 15 minutes spread over 4 devices, or doing 1 wu per device, the total is 4 wu's an hour
ya you hense run the program on one then have proxies on each other system
I've just do a 40k worht it credit with mu GPU and It didn't count
that sounds like a waste of a PC that could be folding
if i did a wu in 10 mins verus 2 hours then my wait doesnt increase between wus i get more done in a 24 period verus normal
define "Didnt Count"
but the point of fah is to run many variations of the same protein, so if you had 4 separate gpu's, that's basically what they're doing already, without needed to be interconnected
I don't get the Estimated credit never
thats why its Estimated
@rich depot what would be the benefit of doing a wu faster? over a x time period there would be the same amount of wu's done if you do them super fast on all of the systems, or slower with 1 wu per system
and now I had a 40k estimated and get 0 @hushed bobcat what can I do?
they dont have enough work to have every person run 100% 24/7
Somewhere here the math doesn't line up for me. What exactly is your goal? If you have 4 PC's that can do 1 WU an hour, if you split it up across the 4 and do 1 in 15 minutes you still do the same. How exactly are you getting it faster?
the total computing power is still the same lol
personally i do about 750k PPD while my estimated is @umbral pumice
I think they are used to coin mining, where there is a benefit to do it as fast as possible, before somebody else is done with it. But that doesn't apply to F@H
yea i dont really see the point of further splitting up WU's
well maybe i could think of 1 way
what if everyone who had more than 1 PC folding in the house had one act as a Work Server for the house.
it would talk to the assign servers to get the full list of jobs available and divide each WU up among all systems in the house
it's not splitting WU like Boss said though
adds a shitton more complexity
no
cause they have to assign shit to that local pc first, and have to keep track of all that shit, plus actually code it into the software
don't forget that the system has worked for years without big problems. Its just the extreme amount of people folding for covid that creates some problems. but the fact its still online is great and shows how good the people built it
honestly i thought my idea was iffy in the first place
just an idea I had that MIGHT be beneficial to the F@H project
probably not
unlikely
is your gpu or cpu usage below 100% ?
a failing HDD would probably be bad though
how many gpus?
I don't have any, at least not yet anyway
if your cpu is running 100%, the cpu is the bottleneck. not your hdd
One thing I learned about this Dell is I need:
- A new power supply
- a 24 to 8 pin converter
and 3. a GPU, lol
I just looked in Windows Resource monitor, with both a CPU and GPU task going its writing at about 150,000 Bytes per second
thats 0.15 Megabytes Per Second
I think I'll invest in a SSD just to be on the safe side. I don't like using HDD's lol
ssd is always nice. but the thing that is on 100% usage is your bottleneck. not anything else
well an SSD is always good for general system performance
but its not going to help folding
The 100% usage is coming from me running F@H
just don't get a DRAMLess SSD
lol oof, don't remind me of that video Linus did
where he ordered stuff from Wish I think it was?
linus is the only reason that wish is still in business
Do any of you know if nvme drives come with the screw required or is that a separate thing?
screw is usually part of the mobo
it should come with the Mobo if i remember right
Just confirming my own suspicions. Dell is an a-hole then lol.
They include the NVMe slot, but don't have the screw there.
talking to the past, so instead of one 12 thread slot, I should use two 4 thread slots and leave some threads unused?
3*4 and yes
No don't do that, its BS!
Use 12 threads, you only start to get issues when you give it over 36 threads or so. All you are doing is taxing the server more by having more slots @shut halo
It won't be anything terrible, usually, it just wont use the cores as well as it could. What CPU you running?
not about to break that up i just power thru my UWUs
2x E5-2695 v2's
dual 12 core with HT
so 48 total threads
then my dual E5-2650 v2's, 8 core each with HT for 32 threads
NUMA must be a bitch for F@H
2695's = Linux server
not limited by winblows crap
NUMA is still on thing regardless of OS...
for folding it has no real effect
one more WU to have server full ๐
but letting current tasks complete and they will be paused for a few hours
also love how my stats page hasent updated in a while
have maybe 15 more UWUs then its reporting
ok 14
EO is decently up to date
Yes
link example plz
Anyone. Else having problems opening the webpage to see your stats
https://folding.extremeoverclocking.com/individual_list.php?s=
On the left sidebar is a searchbar. Theres a dropdown below it, change it to username and search yours
F@H stats folding users individuals overall rankings. Help Folding at Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
@cerulean marsh try incognito
If youre talking web control
If youre talking FatH stats, theyre kinda messed up rn
It updates much less frequently, only every 100 and something minutes
lets see how much power is in use atm...
Today my 24hr points avg should break into the top 20 producers
675 watts for the dual 2650's + the 1660 Ti
and prob 850 for the 2695's
so they will be on break for a bit
after they finish their current tasks
Being new to this community. I had a question on the 3D visualization, does it actually work to see your current WU?
Yes
all I get it is this
^ Do that instead
replace files in the installed folder and you should be golden
could boinc give me more work than FAH? since the latter apparently keeps running out
or rather doesn't have enough master servers
boinc does only cpu stuff I believe but yes, they have more work. you might wanna do cpu for boinc, gpu for f@h
only have good cpu anyway (integrated graphics)
FAH was a pain to get working on linux, hoping boinc is better (official packages, clean dependencies...)
just don't run linux ๐
is it just me or do we have too much guys for those precious WUs?
@jade flicker why was it a pain? for me it was pretty painless to install on linux o.O
is there also a team number for boinc?
@rich depot yes. but thats a good problem to have.
Skyres cause of that stupid gnome python dependency which appears to have a different version or something for which I needed to install another dep manually to be able to run FAHControl but breaking the package manager in the progress (always complaining about broken dependencies and refusing to install anything else)
and thats why i am on fedora server xD
for me it was just install the rpm's write a service thingy for systemctl and enable and start ๐
running pop-os (ubuntu based) primarily for the promised gaming compatibility, though I usually run my games just in a VM anyway (on my arch based desktop)
pop-os isnt my cup of tea :/ u can have game compatibility on every distro u just need to know what u have to do
well, I didn't have to write a service, but the service it installed seems broken, saying that the service didn't start correctly while it appears to run properly
since I didn't get any WUs or could FAHControl running for a while I couldn't check if it actually was working thoguh
@rich depot pop-os promises to be configured for it out of the box with the usual gaming stuff provided in official repos
yeah i know, but i dont like that its build on ubuntu
sure, don't like the apt stuff or gnome that much either so I can agree with you on that
funfact on my laptop i use gnome as my desktop ๐
configuring a proper distro takes time though and I didn't wanna invest it for a portable linux install which I occasionally run on my work laptop
using i3 on my desktop which _just_works
pop-os should build its os around fedora or arch its way better even debian...
i3 is love, i3 is life
i tried using i3 but at one point it was too many fucking shortcuts i have to remember xD
my only gripe is the extra stuff you have to configure, clipboard manager, notificaiton manager, applets, lock screen, etc. which is why I like the out-of-the-box solution from Manjaro
btw. is there an "team number" or similar for boinc to "strengthen" LTT's team from there?
-< manjaro is another topic...
I don't like a lot of things manjaro does but the "themed" pre-configured iso's are nice
just use kde plasma
@jade flicker on boinc website, you can join a team
Just search for linus
on their website? can't I configure it through the client?
Not that I know of, but I use Android
@rich depot my original manjaro install was KDE based till it broke way back and I've been running i3 since then. KDE is a pain to keep making it work on a bleeding edge distro
You doing rosetta@home?
uh desktop android ?
@rich depot no, boinc Android app
meh xD
Literally more powerful than my PC lol
I feel for your phone
lol kag whats in your rig ?
gotta be a burning piece of brick while running that
also bad for battery, even while plugged in
gotta still shorten batterys life span though
I'd love 40F lol
dunno i am not familiar with fahrenheit
I haven't noticed any effect, been running it for ~18 months
and celmor has a point :/ it cant be good for you battery
btw. celmor i heard there was a folding app for ps3
Runs 4 threads, 90% CPU time and 70% RAM, when plugged in and under 40ยฐ and over 90% charge
which is why I'm running the client on my work laptop lol, to get a new device earlier since it's been "run down"
my battery even has expanded 1 year after I've gotten the laptop because of the constant work I put it through
wasn't there a way to use an old cracked one (broken display) by running the client on there without having to interact with it directly?
I think, with an old version of the app
I just dug out my nexus 6 and got that attached too
Set temp limit to 35ยฐ since I won't be checking on it all that much
can you set it up for the phone remotely?
got few old phones with cracked screens which would be nice to find a use for
I can dm you an invite to the boinc discord, you could ask there
sure
where do you see these stats?
aww man, looks like there isn't WU for me this time
can someone recommend settings for this? is there some I can set specific for this team?
You can't but if you fold Rosetta they are doing COVID
not sure if there is a boinc team for ltt
Team name Description Average credit Type Country
LinusTechTips_Team
1,303,733.21 Computer type Canada
guessing there is
nice!
not sure how to join it though
ah, I need to find the join link in the team details
that was... un-intuitive
now I intermittently get "this project is down" when browsing the boinc (on bakerlab.org) site
I'm sure they're seeing a massive jump in users so their site is probably slow
meh, it's sucking up my disk space
You can set a limit on that too
would rather have it use /tmp for it's work
If you always have an internet connection, set it to cache like 0.1 days of work
at least always when I fold
wouldn't wanna do that while on battery
seems that's the default already, or did you mean the options below? https://imgur.com/a/AYfE1bE
You can set the additional lower too
done
How many cores does your rig have?
4 (+4 due virtual due to hyper threading)
work says it's the highest end laptop lol (I guess if you only wanna buy from HP and only the elitebook line)
still searching for where boinc stores its data
in the cloud
Been trying to start up folding for the day for the past hour. Keeps saying there are no WUs available for my configuration. Gotta keep waiting
@mighty lodge you can pause & resume if the wait times are too long; also if you have a high core count CPU, you could divide it in parts
like this in fahcontrol
I'm not folding with my CPU. makes too much heat. GPU only
yeah, in that case just try to pause & restart
where is a better team stats page the folding@rancid agate one hasnt updated in 12 hours
says i have 243k points when my one client says i submitted 400k alone
F@H stats team summary for LinusTechTips_Team. Help Folding at Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
@jade flicker where did you access that settings screen ?
Hey gang, is there an advantage to configuring F@H to use the maximum number of cores? right now it says it's only using 4 of my system's six cores
set it on full
or manually select 6 cores in your slot config under advanced control
@rocky otter it need atleast 1 thread per GPU in your system
Ohh that makes sense @hushed bobcat
I have a 6-core cpu without hyperthreading, and apparently it can't use five cores
so it uses 4
in the log it says something about avoiding domain decomposition so it cuts down to 4 sometimes?
and I'm on full
never heard of that one
@hushed bobcat how do i find bionics computing prefrences
what are computing prefrences?
@rich depot that's only for BOINC
oh
If you're only running Folding at home that's not an option
You can if you want. BOINC is like Folding at Home, it's just a different distributed computing project
got ya
I've heard Rosetta sends its data to F@H to help them get WU out
but I cant substantiate that
does boinc not use the lowest prio for its worker processes? cause I'm definitely feeling it doing something more so than using FAH
maybe when my mini itx is up with a 680 ill toss it on that prog
Update on my CPU situation - looks like there are a couple spots where F@H can't use a prime number of cores greater than 3. however, looks like that's only a couple points, and I'm getting full utilization otherwise
@rocky otter thats interesting
but in my experience my 8 thread rig gets about the same amount of work as my 11 thread rig
maybe a little more
so a core number of multiple of 2 should work just fine? is it recommended to spawn multiple "jobs" if running higher than usual core counts (16+)?
depends on if you want small core jobs or big core jobs
Did anyone here made the Advanced Control works to show multiple computers running F@H?
I do know how to add a hostname/ip address to another host with the software running but it never connect.
you have to allow the ip of the computer you're remoting on in the "Remote Connection" tab
right now it's only 127.0.0.1 just put a space and then the IP of the computer you're on
dont forget to restart your client after updating remote settings
Restarting shouldn't affect it as mine just worked on a save, but it's a good measure.
yea, sometimes the socket needs an extra shove, sometimes it doesn't
@near gazelle https://github.com/Cairnarvon/ClusterDebian
gonna try that out
on the latest debian, which I know runs f@h
When you go to work for 9 hours and come back and it still hasnt got a w/u welp
try pausing and unpausing if the timer's been a hour or more
Tried that even the last few days, seems the servers are still too busy.
I'm just running 1 slot with all 8 threads on my CPU, I don't have a GPU yet, but that may change tomorrow
My cpu i find gets them a little more frequent but i only have a 120aio right now on my 4790k so it gets a little to warm for me to keep in going 24/7
i'm hitting finish on my cluster's jobs rn
gonna retool it tonight after the wu's finish, so there'll be at least 24 more
oh yo. My current WU is a covid one. I've only gotten Alzheimer's ones until now. Also I've taken off the front panel of my computer and pointed a massive fan at it to take a picture of as a joke but it turns out my temps are better now so I'm gonna leave it there
i pulled the video card from my 4790 pc w/ a u14s in an r6 and now the cooler feels total overkill, lol
oh wow, does it send your sysinfo with every WU?
Am I the only one who ponders to look at the used markets for gpus to get... More?...
im there with you
Got a 4790k just sitting there, pc just lacks a boot drive and gpus
It could fold nicely with just some gpus in it
make a mining rig and just use it to fold
Less than 100k off top 20 producers, soooo close
Still rocking my 4790k with my rtx 2070
Should hit tonight
To fold with?
Yah
There was a list somewheres and tells you the aprox ppd it gives for most upto date gpus, i'll see if i can find it
Right, just have to follow that then and see what stuff costs
Used market here is not fantastic, like 130 usd for a 1060
I usually score 1060 6gbs for 100$ cad on kijiji
look at 1080tis
Those are gonna be like 400
Yah those listed here locally are like 450 minimum
And by locally I mean Sweden as a whole
Don't have "that" much to spare on this just for the fun of it in this economy
have u looked them AMD cards? I bought a R9 nano for 90โฌ couple months back and it seems to fold pretty well at 150W power limit
Just started to look just now, botoed up my laptop to easier check
Because I am too lazy to move to my desktop coughcough
Not much AMD for sale, weirdly enogh
Thanks
Thats the most used one, and np
I should try to get that 780 back from my friend that is not using it anymore...
But it is down in Germany
1060's and 980's look pretty good and their price points are pretty low
Why is the score higher for the 1060 3gb than the 6 gb oO
Don't think it uses vram?
But wait there's more
I thought the 1060 6gb was overall a bit better than the 3gb version
not only the vram
I see the chart now, maybe the 1060 6gb was throttling or a poorly made oem version
a bit
What I can say, is that people think their used gear is worth more than it is
Honestly, any little bit counts
the contribution may not be as much, but the points are the only incentive.
Very true
I switched from a 6500T to a 6700 so I could actually benefit from a beefier CPU
I'm going to throw a GPU into this eventually, just gotta find the right one
Well, it is quite fun to get these stuff going
I threw in my old radeon 5770 in my main rig too see what the estimated ppd is on it and it wont even find a w/u lol
Okay, here's a question maybe you or someone else here can help me with
Is there any GPU out there that would be good for folding that doesn't require additional power
I got a 6970 on a shelf somewhere
You can say no, I know where this'll go
You've got a point there
If you go by the list they posted
sorry I'm not being very objective
I think the best one would be a 1050/ti
I gotta figure out what my best option is to upgrade from my hd4850, f@h doesn't even try to use it
eh
you can get a 1050 ti that runs from the PCI Express power only?
If I can find one
Yep
really?
yea but it will run hot
that is pretty damn cool actually
Yeah, LP
I think some 1650s don't need a 6pin either if i remember?
Can't find 1650's here either frick
Afaik all lp cards are pcie powered
I appreciate the insight
pulling 90-100w off a pcie port isn't recommended
This just means I need a new power supply
Just a little hiccup here, a little hiccup there
I know I got a 1030 passive card in my htpc server, that runs of only pci express power
That one uses 75w pcie only
My issue is that Dell is proprietary and I need a 24 pin to 8 pin adapter
75 isn't bad
@lost oak that's dope
Yeah, 1650s were made for prebuilts to plunk in that don't have 6pins ect
ooof my laptop found a gpu workload...
@odd barn same bro, I left out a hdd to power my gpu
Holy shit
Kinda a replacement for 750 ti'd tbh
I think I found the solution lol
Gonna just post the description of this device
Dell Precision T3610 Workstation Intel Xeon E5-1650V2 6C 32GB RAM 500GB SSD nVidia Quadro K4000 Win 10 Pro
Mine is a sff optiplex 790
The 860M is not a super powerful GPU XD
sff gpus are usually more expensive sadly
Hence why mine is external lol
What are your thoughts on the Quadro K4000 for folding
Looks like it was based off the 660 though so eh, I can always upgrade
worse then a 750 ti so probably pretty crap lol
Lol that's what I thought
The xeon is pretty good though
There's someone selling brand new 1050Ti's, but it looks like they MAY have been used for mining
They're saying it's brand new, someone was supposed to use it for mining, but it didn't work out
I've bought many mined gpus, they'll working to this date(RX 580 8gbs)
got them for 100$ cad a pop
Dude
so like 75ish us each
New brunswick lol
Ah lol, mb
But ayy fellow canadian
Now i know why you're having a hard time finding decent price gpus lmao
hahaha word
Yee go for it
Radeon RX 570's are quite common used it seems, and 480
But damn, my prices so much higher used than for you guys
geesh
Cheapest 580 is 160 USD
Think people really want too much money for their used gear
Yup, you check hardwareswap?
If I buy from outside of europe I am gonna have to pay customs taxes for the stuff
Ahhh
But might be worth it if I can get them much cheaper, but I imagine private people aint gonna want to ship them here
@odd barn yeah, the dell workstations are cheapo
Also... geesh having your laptop GPU fold while it is on your lap is not comfortable.....
You never know, there's a post from 2 hours ago, rx 580 for $105
Dude has a crap ton of gpus
Gonna scour the sweclockers market instead of the like page we got here called blocket where everyone is selling stuff
@hushed bobcat 7you wanted to know what i ppd
Might be more reasonable prices sold on a forum for hardware stuff
my protein viewer is not showing my job
@rich depot My 4790k is less than half that
viewer doesn't work right on the new version
oh ok thanks
That supposedly fixes windows version, otherwise if youre linux, can go on the FatH github and build the viewer yourself
I have no personal desire to stare at proteins
idk it just doesn't make sense to me, so it just looks like a blob
i would love to have that type of numbers
i have a 24 node cluster of free running quad core clients
we're having fun with our spare cpu cycles lol
you'll get up to a higher rank before you know
yea it's fun watching my name fly up the pages. most of the users are inactive
If i run F@H on my pc and server with the same account do i get the points for both of them on the https://client.foldingathome.org/ site?
yes@tough blaze
when your estimated PPD is less than your estimated credit
fun
that happens if the job takes more than 1 day
almost hitting 2mil
and you're all CPU right larry?
get a dual socket Epyc board
cpu was low today for some reason... i hit 400k on that yesterday
might be able to break 1 mil on CPU
its a neko
kitteh@rancid agate
what is your setup @stark bough
btw my my gpu says ready but does not start running why?
jeez I feel bad now
no WU @tough blaze
@tough blaze mine did for a bit and i let it sit and it went
okay
Just reset it once an hour
@storm talon bad for me?
yea
well i have a cat but you dont.
we have a shark
i have a pocket snake
This is my baby Kenyan sand boa, Waffle! He loves his mini sand box!
Check out my latest reptile biology video: What Do Reptiles Do When Itโs Freezing Outside? https://youtu.be/yyps3aG5gek
Follow me and my reptile friends on social media!
Instagram: http://www.instag...
@timber grove yes i get the error could not get an assignment
anyone else watching the geohotz streams
biopython and stuff hacking the virus
it's way over my head, but I know computer viruses and it's essentially the same
it's been up since yesterday bud
That's a good thing right
linus face tips folding server
good for me yea
I don't have children but I'm certain I'd share the same sentiment if I did lol
man i can only listen to tiktok memes and roblox shit for so long

My younger cousins are all obsessed with fortnite and apex legends
I swear it's all they talk about
yea my kid plays fortnite
got him a pc lately so he's been steam sharing my catalog
mostly cs:go and rust
Time to get the kids folding instead
oh he is
Means the kids ain't bothering us in other games
LOL I gave him my headset with the unpluggable mic
and "lost the mic"
he ain't reeee'ing anywhere
I haven't had a minute to play or record this month
I'd rather work out than game right now
yea, rust is full of 12 year old squeakers rn
With what little time I got
no time for it
Shit
I love rust tho
it's such an unforgiving game
it's the only game I've played in 30+ years where you can win a fight, hide to med up and get killed by a chicken
LOL
srs
he was trying to make the kid run into the wood barrier
making people miserable is a requirement of the game
ok then... twitch links are a no no. got it
lol @stark bough
F@H stats user summary for ec2spot. Help Folding at Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
That's Jeff Bezo's account
https://aws.amazon.com/ec2/spot/
Amazon EC2 Spot instances are spare compute capacity in the AWS cloud available to you at steep discounts compared to On-Demand prices. EC2 Spot enables you to optimize your costs on the AWS cloud and scale your application's throughput up to 10X for the same budget. By simply...
That's an impressive PPD
indeed
That is cool and all
but would be cooler still if the man gave some more money to help medical staff
He is not exactly known for being generous or helpful
Amazon staff does not have it great
Well I think that was more a comment that he's not a Bill Gates
They've never had it great
Jeff is not exactly a humanitarian
looks to me as if he's going for #1 rank on the project
to get some clout
AWS elastic is killing our WU's lol
well he's far off LTT atm ๐
he must have a crypto farm
it's just gonna keep scaling up and up
regular people can't compare to all that money
lol Boss...I'm sure he's just running on EC2
He can just set up the amazon servers to fold for lols for a couple of weeks
ec2?
oh
True but he can actually only scale as far as AWS as available GPU instances
Think the cloud, but elastic
very true leadeater
i could do that with windows aswell
and gamers do actually out populate him
he can only scale so far by himself but he does have a TON of processing power
LTT vs AWS is very interesting ๐
What is LTT currently ranked? I'm tempted to join I've got a lot of GPU's
flex wars!
He can probably out scale us if he so choses, but I doubt he want to spend the money to do that
who is aws
Amazon Web Services
ill join more systems to ltt to beat this guy
LTT is 4th and current 1st producer by FAR
get bezos on team
So you guys are producing the most, but still losers?
ltt needs another contest weekly till covid is done to get more kids with gaming rigs folding
150wu's in 3 days
well curecoin was giving crypto and EVGA gives store credit
and default is well default team
so we are 1st ranked for not giving money to folders
wait, they're giving money to folders? doesn't that kinda muck up the purpose?
So its going to take 1.7 years to become number 1...
FoldingAThome is not giivng money
will take more than 1.7, this rate is not going to stay
EVGA is giving in store credits to their team members depending on certain criteria
How many work units can you do with a 2080 TI?
this team has grown exponentially since the video
And curecoin is some sort of crypto somehow somesort
2080 Ti is something like 2.3m PPD
^
Best case scenario about 2,4-2,9m
Oh thats pretty good, I could make a significant improvement then
curecoin production tanked after the payout ratio changed, at least from memory that's why
hell yes
my 1060 6GB does need twice as long
my 1060 needs about 5 hours or something to complete a project
Do people also use CPU's?
Yah
look at my gif
I do
that's all quad core cpu's plus the host
But there is less CPU WU's in general it seems
Almost all my PPD is CPU
Is there also work units for crazy amounts of ram?
And GPU WU's are worth far more PPD
is GPU better PPD/W?
no ram WU's
No FAH is mainly compute power not ram
im sure it is, but dont have anything to cite it
BOINC has projects that needs tons of ram
All up I've got about ~40 2080 TI's worth of GPU's I could shove it this, and ~150 CPU cores most of the boxes have 64-128gb of ram
Just leave the CPU folding out for that, it'll lower your GPU output
more corona specific teams getting into the fight
strong/fast CPU cores are about 10k-15k PPD each
what does ppd mean?
points per day
strong/fast CPU cores are about 10k-15k PPD each
@silver wing
||If you can get work||
How many CPU cores do you assign per CPU?
I don't even know how you guys are getting so many w/u
@stark bough I have ALL the work ๐
So a 20 core CPU only does 1/10th the work that a 2080 TI would do?
yes, but there are CPU only jobs but points wise GPUs are king
you don't miss out by not CPU folding though
Takes about same time for my 9900ks to complete a job as my 2080TI
and I get 15 times the points from the 2080TI
Ah well I'll just stick to the GPU's then
to give you an idea of all the simulations the gpu workloads are doing.
Just do both at the same time
I would just set the folding client up to default settings, medium and see if it affects your regular workload
if it doesn't close it and forget its there
In a multi GPU system CPU folding will lower the GPU output, it's just not worth that loss
technically he can allocate one free core per GPU
I.e. 6 core system with 2 gpus.
4 cores cpu folding.
true
true but if you have 4+ what's the point ๐
All about winning right lol
I have 20 boxes that have 8 core CPU's in them and Dual/Quad GPU setups in them, so if I don't do any CPU processing it should be fine for the GPU's
inb4 he thermal throttles.
@tame plume why do you have somany pcs?
You know why
hes a supervillian
I'm a video game developer, until very recently I was a graphics programmer working on Star Citizen
darn, I was actually wrong
yeah, but my theory hasnt been ruled out yet.
So I have my own render farm with just about every type of GPU you can imagine sitting in it so I always have access to test my own research across a wide range of hardware
@stark bough In current climate I'd say confirmed /jk
@storm talon
me when i see that graph:
https://i.imgur.com/G1Borkd.png
lol you wanna see a worse one
If you got that many rigs available, just set it up and let it run it's own life to start with, just make sure you get the passkey thing
@storm talon Time for a vSphere fight?
Then once you get it going you can try to fiddle a bit to get it more optimized
Show me your ||power bill||
don't make me add 10 or 20 more vms
@stark bough it's over ||9000||
I split my 9900KS into 3 CPU's with 4 threads a CPU, and kept 4 around for other stuff, if GPU needs some cpu power, dunno if it does.
They all got work OO!
ahh nvm, company name in that lol 1 sec
forget ๐
already did bud
a lot of ur cpu cycles are sitting idle tho
oh. what hardware are you running on
As it says host is 100% ๐
I'm running all R810/710 HA/EVC clusters
can only run these while work ahhhh... doesn't know
those can dick with performance
host is single FAH appliance VM
oh
the VM has two CPU slots with 48 cores per slot
are you utilizing all 48 cores effectively?
says 100% right ๐
what's your ppd on it?
1.7m-2m
all cpu?
when it was single slot with 96 cores it did more but some WUs hard cash on that many
yep
The other E5-2667v1 servers do around 125k-150k PPD
bare metal linux single CPU slot
400W per server for those
clusters of R810's
950W for the other big two
haven't actually seen that big of a spike for power
we're doing consistent 5kw per rack atm
well i guess people are sending out demo jobs because both my systems are running full tilt sucking about 600W
and that's all i see being rendered. on my systems
?
the viewer in windows doesnt work atm
yea, 7.4.4 works if you wanna go back a version
FYI the people with the 'fixed' version that are seeing big cubes is bugged
Seems to work fine with the CPU work units but the core 22 GPU work units don't like the viewer
well fun. so how would i know what job my systems are doing then if the viewer is broken?
Web control and advanced control tell you the project number
so is Projects 13850,13851 for cpu
CPU : 13862 - 13863 - 14328 - 14329 - 14337 - 14528 to 14531 - 14572 - 14574 - 14576 - 14600 to 14602
well somthing happened my power pull from both systems jumped from 600W to 840W holding steady.
Looks like they've added some new ones since that list I have
FYI the people with the 'fixed' version that are seeing big cubes is bugged
@fierce steppe
You mean the swarms of particles attacking the one enzyme?
if it pulls more than 900W my breaker will trip! lol but not really...
The purple ones that form the big cube are the solvent molecules and the viewer is not supposed to render them
what i mean is i breaker will trip but not going to be fun if it does..
Thatโs due to space filling
Try and keep the breakers cool, they trip sooner if they are hot
You're using multiple PCs? Move them to a different outlet that is on a different breaker (if your house is wired that way)
^
i wish... this building was not intended to be a Server room and already the other leg is maxxed out by a fan, a heater lights and another pc.
Do you have reptiles or something for the heat lamps?
i could cut the heater of course but then i wiuld freeze where i live.
Just fold more
replace heater with equivalent PC power draw, same heat output ๐
^^^
Is there an "MSI Afterburner" equivalent for linux that can apply different GPU settings to my 2070super? I'm handy w/ command line so no biggie if it's config files & a cli tool
i only have 3 PCs and a heater no need for me to blow another 2000USD this year for another.
My suggestions aren't always good ones
No need to spend $2000. If your goal is to create as much heat as possible just buy some old graphics cards like a 295X2.
cries with his actual dual 290X GPUs
I always love bullying you, Leadeater
i do have a spare RX480 lying around i could try to do somthing with it.
Triple GTX 580's
i think so yes
i know their was a good reason why they stopped doing that
but i cant remember
this was before the fall of SLI too
@silver wing yes titan z
cards with dual gpus didnt ever perform propper always driver issues
to save money they say they dropped dual gpu cards
@hushed bobcat your 4790k should do way more then 40k ppd
im not even savagely oc'd
That's your GPU output, 4790k would be 40k worst case but no more than 70k, likely in that high mid 50k
anybody getting stuck at connecting?
I have one computer that is active and one that is connecting
probably need a reboot of the PC
sick
I did have a WU on my 8700k earlier that estimated 250k PPD
which i think is damn near impossible
I'd round that up and call it 40k too ๐
okay that is interesting
the advaced control isn't "connecting" but when I go through the web gui, I can get it to start folding....
I wonder if I jacked things up trying to do remote stuff...
could always rename the config file and get it to generate a new one
Yeah I might just do that
@silver wing in windows which config file?
in the configs folder./
NOOO I'm literally 15 points out of the top 20 producers
@hushed bobcat 40k looks fair for that cpu
mine only gets jobs that do 100 once and a while
screw it i Iwill just uninstall and reinstall
yep quick re-install fixed that lol
and we just cracked 4 billion points in 24hr
s'goden
Love Tanis
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwis...
when the ltt team shows up to folding
https://cdn.discordapp.com/attachments/558582725762875432/693694818781626387/JPEG_20200328_233352.jpg folding rig cooling madness part 1
yeah, I think I'm going to turn off CPU folding at this point
the gains aren't worth the electricity and heat. They are worth so little
how to you shut it off in foldingathome ?
i cant pause certain ones



