#folding-and-boinc
1 messages · Page 40 of 1
ah, that thing shouldn't generate a lot of heat
anyways it's bad for the battery be aware
if you leave it overnight
yup, the only prob (and i found this common on the folding forums) is that the gpu wu usually got the error Can get clGetDeviceInfo (-5)
dont know how to fix it tho
pull battery and your good
Was the ltt server down yesterday
pull battery and your good
@green monolith nah im fine, the battery is dead soldered so
¯_(ツ)_/¯
anyone else?
anyone else having problems with sending results? one of my WU's from last night won't send
my cpu is stuck on download
anyone else having problems with sending results? one of my WU's from last night won't send
@rich depot server down maybe
I'm on 99% gonna find out soon
which project are you sending on? @rich depot
Don't worry, the problem isn't on your side; it's just that there's lately so many people helping that the distribution servers are out of capacity, so you'll need a bit of luck to catch a WU sometimes. @crimson sierra
which project are you sending on? @rich depot
@rotund flume 11758
Sanji change "Copy" to "Cuda"
@hushed bobcat this worked thanks, :))
Possible failure to upload completed WUs 11753 & 11758 to work servers 155.247.164.213 & 155.247.164.214. F@H are aware and are investigating the issue. Read More...
@rich depot
sweet
that happened yesterday
euf
14533 is what my gpu is uploading
thanks for the update, I googled the project but couldn't find any thing @rotund flume
Where are my WUs? How do you peeps keep getting stuff
it's just luck
In case your "Next Attempt"-Timer is going above 1-2 hours, you can try and reset the timer by pausing and starting the folding cpu/gpu @trim furnace
im setteing up my perants old laptop to fold
@green monolith is that the quad socket system you posted earlier?
@rich depot btw you should check known issues in the ltt page for folding for infos about knowm issues to f@h
https://linustechtips.com/main/topic/1164541-ltt-folding-teams-emergency-response-to-covid-19/page/168/
defuck you do with all those servers sakura
known*
"stuff"
o.0
also its DAFAQ
lul
maximum folding power
my poor plex users
lol
i figured you would have GPU acceleration on your plex server
ohh you host plex servers and stuff like that
yeah even have the nvidia patch applied
hahah thats cool
i do wonder how hard I can fold
you should post a pic of the rack Sakura
with an nvidia GRID K1 card
yeah
stop flexing
as far as i know you cant fold with GRID or Tesla
keep flexing
oh i have a gt210 in one of my computers 😦
i thought GN steve said they fired up there render server with 2 tesla v100's to fold?
@hushed bobcat grid k1 is supported, it is listed in the gpus.txt in fah
waow sak
hm
so my gt210 would work?
isnt that a greylist? it has both blacklisted and whitelisted GPU's
here network gear while I am flexing https://cdn.discordapp.com/attachments/491173350287212566/515225773930447033/IMG_20181117_130303.jpg
isnt that a greylist? it has both blacklisted and whitelisted GPU's
@hushed bobcat oh yeah, lte me check again
that switch is way to empty
which?
Blue one
the 1G switch?
thats cool
under it is my 10G switch
the SFP+ switch?
10G is SPF+
reeeeeee
yea
aww cool
have you heard of the new Mikrotik switch coming out?
as all my hardware in rack is IPMI/idrac enterprise enabled
CRS354-48G-4S+2Q+RM
i stay far away from tiks
Really?
yes rly
REEEEEEly
wont be apart of my home net ever
they seem to be nicely between consumer and pro level gear
enterprise gear or go away
Need advice
why eterprise?
what happens if yo run a windows update in the middle of folding
is the work saved?
can you continue after reboot
yes it saves every 15mins
because enterprise generally is built to last and has more features you know you can shake a stick at
if you can pause it so it will do a save and you won't lose any progress
ohh taht makes sense do you use decomissind stuff or new?
stuff from ebays
ohh is it cheaper?
so i'm guessing ther server is getting hit hard? i can't even upload my finished WU
i want a 10G connection to the net
ok linus
I looked into getting an Arista switch like the one Wendell did a vid on
10g for me is 5k a month
but the command line serial management and inability to get firmware updates shy'd me away
homelab environment is perfectly fine
Rip, my 38k gpu task gave an error while submitting, so no points and all the work for nothing
and honestly this point/click is kinda crap, you dont learn anything
@rich depot their servers seem to be overloaded atm, I think it'll retry submitting
I GOT A CPU WU 
Nope
their servers are overloaded for the past week and a half because linus called everyone to fold more or less
Yea
That's somewhat of a good thing, no?
It is
Kinda
yes and no
but they ran out of work to send
yes ppls are willing to fold
and their servers cant keep up with the requests
bad because not enough tasks to go to everyone
I want to fold! i'm cold
i made 1 mil while i was at work
@supple laurel tht's actually why I wanted to fold
cooler than mine
i use gpu only WU
ryzen? thats a little hot.
i7 4790k
mine was running 97
ahh speedfan!
r5 3600
intel that might aswell be cold....
okay I'll let it run. It said ETA 5 days which scared me but went down to 3h
most start with a base of 5days. give it a few mins and it always updates
here my storage servers stats https://nuku.neko-network.net/screenshots/3a72mmd79ad7.png
it says it is working but i dont see anything happening and i just wanna help
Probably just struggling to download a WU
Just put it in the background and let it find some work for you QuickFix
ok changed from 24 threads to 47 threads
okay so i just need to wait a bit
what are the temps on those Xeons?
just a reason to get new hardware?
should i just wait for i to find work or @hushed bobcat
my 3900X runs at 80-85C, should be nothing to worry about. PBO will gradually reduce core clock so it doesn't go far above 80 right?
i wonder if it would be better to have 2 cpu slots and assign the cores to each cpu socket
@rich depot all you can do is wait, there servers cant keep up with requests
@hushed bobcat also server is set at fan speed = FULL
oh okay
i wonder if i change my fan speed in my R720 if it'd sound more like a jet or not
8k RPM fans?
thx for the help i will come back if i need more help
12k
ohh lord
12k rpm?
both my supermicro servers have 8k fans and they're pretty loud at full tilt
so hows the tornado?
thats more than my helicopter does
maybe they are restricted?
i was looking at some 3k delta fans for my desktop. my 1700 LL 120s don't like my 60mm rad.
ahh yea i just built a plex server for a friend in one of those
I'll never use SAS drives again lol
SMART is not to be trusted ever
also i lost like 6 drives in the first week
dont see why ppls fixate on SMART data
sakura thanks for the CPU job 😉
SMART = I am perfectly fine
real data = drive is freaking ded jim
one drive failed so hard it locked up FreeNAS
even though i thought SAS enterprise drives were not supposed to do that
and yeah i dont use ZFS
Hardware RAID all the way, change my mind, you won't, many have tried
GPUs*
well its not mine, i built it for a friend
also FreeNAS doesnt really do anything with GPU's
your friend knows he wants to
as far as i can tell
eww FreeNAS
from what ive seen cpu WU arent worth it as GPU WU run cooler for me and i make a lot more points doing it
i can do a WU in 1 hour flat and get 171k points
you are technically right FzR
o-o
but there is no reason you can't do both
but there is work only CPU's can do
"Coronavirus SARS-CoV-2 (COVID-19 causing virus) protease - potential drug target
These are high-priority CPU projects to simulate the main protease of the COVID-19. At the time of release, this is the latest news report: https://foldingathome.org/2020/03/10/covid19-update/
Please stay tuned to https://foldingathome.org/news/ for more current updates."
temperatures maybe
if your watching power useage leave it to GPU only
cpu contributes to a vaccine more than a gpu does
even gpu only it uses cpu power
i see it using 10% of my 9900k and making it run at 60C on my custom water loop leading me to beleive its an avx load
it is
Yes
I actually re-did my overclock to use an AVX offset so my 8700K would run cooler
I disabled turbo on cpu...
thing is i cant run my 9900k and gpu at 100 load like that cause my cpu is OC to the point to where gpu and cpu id thermal throttle even with custom water cooling
but, gpu only with my high OC pulling 350W i can comfortably have my gpu idle at 45c
Honestly FzR if you can't run both CPU and GPU full tilt in a custom water loop something is not right
^
my 9900k is a dud OC it needs 1.35V just to hit 5ghz non avx
Because the 9900k is a space heater
I'm running air on my 5GHz 8700K and 1959 MHz GTX 1080 Ti
i ran OCCT full system stress test, pulled 170W on the CPU and 350W on the GPU
i have a golden 2080ti im running good OC on
GPU hit 69C and CPU hit 88C
i have a 2700x at 4.2 with 1.4v with a 2080OC and my 480rad does not care
after 5 min
1.4
depends on load for me if i fold only on cpu i stay at 80C but if i do gpu and cpu my cpu hits 90+C cause my loop order is pump>gpu>rad>cpu?2xrad>pump
loop order shouldn't matter
both Jayz2Cents and Linus did videos on it
also you have 3 rads and you're still overheating the CPU?
how much rad space do you have?
what you running 1.45V?
it matters when your parts put out that much heat
i have effectively 720mm of rad (a 120,240, and 360mm rad)
and yeah my voltage is high on cpu cause its not a decent silicon cpu
If you had the one 360 i could understand, but with that much radiator you shouldn't have a problem
i mean IMO you should be able to add another GPU
2080ti is expensive
nah
Disclaimer: please keep in mind im not a water cooling expert, i've only water cooled once and it didnt go well
this is just knowledge i got from watching videos and doing research on watercooling
That's a lot of radiators
my coolant is 25C with my gpu at 100% usage for the past 30 minutes
Is your pump doing alright there?
yeah brand new corsair d3 pump
He has large amount of coolant soo ofc
i actually had that issue on my watercooling setup
flux from the rads had partially clogged the waterblock fins
I would try touching the rads while it's overheating to see if they're actually hot
And if they're then u need more fans
Or better fans
my loop is fine its just my current dud of a cpu, (ive got a 9900ks on the way to replace it)
🤔 use the snipping tool next time maybe
^
Or use snipping tool hotkey
due screen
can you post your VCORE under partial load FzR?
maybe even the ViD
POG I didn't know that @forest belfry 10/10
oh wow
not loading team info
if you used that shortcut you can just paste the pic in Discord
Yes
thanks @forest belfry
im not worried about my cpu temps anymore cause like i said in a week or so i wont have it anymore so as long as my system is stable im not messing with my OC
Why would u think the ks would do better?
but my rig is at 5gh all core all the time with 0 avx at 1.4V
ks is a binned 9900k
ks is basically a binned k to run 5Ghz all core
Yeah but it needs a lot of cooling as well
actually thats almost the exact overclock i had FzR
and i got it for less than the price of a normal 9900k cause i know a guy who works for oem manufactuers who had a couple laying around
@stark bough I'm too dumb to understand that
i got my cpu used a while back from a guy i knew tried to OC it and didnt do it right, i used ot be able to get 5.2ghz all core with a 1 avx offset but this cpu has been degrading even at stock settings since i got it
been solid at 4ghz all night no thermal throttling
i know he messed this cpu up cause he sold it to me with a board that turned out to be partially fried cause he blew the vrms on it
so the fact this cpu is degrading doesnt surprise me
Omg
Wow
hence the 9900ks replacement i have coming in
im just after a new graphics
how do you even fry VRMs
i suppose if you had literally no airflow, and ran a Small FFT for like 24 hours....
too high of a voltage and not enough cooling
i'm also quite baffled your cpu was still running in general
hahahaha
and with the high power a OC 9900k can draw its possible
yeah like i said ive had it about 6 months and i went from being able to do 5.2ghz at 1.38V to now im stuck with just 5ghz at 1.4
i was just watching the video on folding@home, but I was looking for the site linus was talking about where he said to google "ltt folding team number" is he talking about the forum post, cause I was looking for the statistical site, anyone know how to find it?
team number is 223518
ah thank you 🙂
yeah, i get that, but I doubted anyone with a decent enough mindset to set up an OC high enough for that would also be considerate enough to actually read up on what the vrms can supply, and be careful enough to not actually fry anything; up until now
Wow, restarted my PC and got a bsod, a few repair attempts and then return to earlier copy of windows before FAH was installed, after running it for some 60ish hours... interesting oO
well it wasnt just vrms he fried the rgb on it also (he hooked the 12v to 5v rgb) so it also had that messed up
like he basically messed up the rgb on it and i think it messed up the boards power delivery also
@gusty path Sounds like something else. It would have BSOD right away if it was FAH
4.9 is unstable too unless I go over 1.375V
Sounds like he treats voltage as a suggestion
Yah gonna have to look into it later don't have time atm
But not had any bsods before on this pc
yea i set and AVX offset of 2 on my 5GHz overclock for F@H, allowed me to lower voltage like 0.1
running boinc on cpu (dont have cpu wu right now) and fah on my gpu
Anyone here run a 3700x on stock clocks? What voltages are you running?
@gusty path Might be worth running a chkdsk on next bootupu. Quick and easy in case it's disk related
@stark bough I think I'm on 1.3.v
OR maybe 1.2v - can't remember
It did that after the bsod before running Windows repair by itself
Every PC in my house with a GPU is running F@H, and my Ryzen VMware server is running BOINC Rosetta@ Home
Are you on it right now? Mind DMing me a screenshot of your Ryzen master config?
I have all my pcs set to FAH and WCG
@unkempt geode Leaving the Mobo to manage auto-turbo was horrendous. Voltages top end of 1.475 randomly, so it would overheat doing very light work.
my laptops are glacially slow at it but hey its something
Yeah I’m planning on running a low power stock clock config
@stark bough Sorry - I don't use it. It was all set in the BIOS
Oof. Well thanks.
I kinda regret getting 3700x at times since so many people got 3900x and 3600x
And it’s a bit easier seeing videos for those
@stark bough Have a look at the LTT "green" PC vid. https://www.youtube.com/watch?v=-d8gcfbjoZM
Thanks to Seasonic for sponsoring this video!
Buy a Seasonic Power Supply:
On Amazon: https://geni.us/q4lnefC
On NewEgg: https://lmg.gg/8KV3S
Gaming’s not all about raw power – And if power consumption and your carbon footprint mean anything to you, maybe it’s time to rethink...
Oh nice.
3000 series basically feels like it broke all the rules for first gen
Faster ram, less picky
Damn I should have gotten 3900x now I want to try full time VMs -.-
@stark bough 3700x is a beast for 65W TDP. I have 3900x waiting to go in my gaming PC (replace i7-6850k), but it's a lot more money :/
Only worth it if you do creative stuff
Yeah, I don’t do video editing as a career
3900x is nice, just having built this machine. VMs actually run (coming from an old i5 4 core 4 thread lol)
I recommended a 3900x to a video creator friend of mine
3600 just didn’t feel like it would do the occasional core heavy workload I sometimes ask it to
my friend is still on a E8600 but i hope they can afford 1600 AF eventually
@stark bough I'm using an R5 3600 in a VMWare ESXi rig
Plus I figured I could just drop in another AM4 later in
@stark bough In theory the 3700x is slightly better at adobe encoding, but all other productivity the 3900x smokes it
What’s TDP for wraith cooler again? I’m getting 80C on it at times
the problem is there really isnt a Server grade Mobo for AM4
@stark bough which wraith? lol
"Currently, Wraith Prism offers support up-to 105 a TDP of 105W" -guru3d
my 3900x hit highs 80s, low 90s when all core folding
Do I really want to take down my system for 15 minutes to swap the stock paste with MX-4
🤔
that’s folding time
mine stays below 85 at all time epsilon
@stark bough Do it. We#re all waiting for WU to be available, so not processing atm 😉
my system hovers around 70 - impressive considering its age, outdatedness and output
yeah I figure I’d try doing it during a dry stretch
my 8700K hovers around 85-95
@dreamy hazel while folding? huh wonder what mine is up to considering I havent OC'ed or anything
i also just got a WU as i'm finishing one
13861
How peculiar, it wont open chrome
neither have i
Are you undervolting at all? what clock rate you at?
mine stays at 4,1 ish
3900x must be on intermittent fasting. It must eat like a WU in 30 min and spends the next 12 hours hungry
I'm quite confused for now
@stark bough yarp
@dreamy hazel Now I am concerned.... Im on the auros elite
i mean, anything up until 90 is fine
"Projects 11759-11764: These are high-priority CPU projects" what is my GPU doing? 11579
if it hits 90 then you might want to consider giving it a slight limit
my gpu is doing 11760 lol
why is my GPU doing high priority CPU WU? 😛
we need a counter for every time this discussion starts
^
The “gigabyte ultra durable” marketing makes me cringe at times
Can’t believe they still use that
Even TUF doesn’t have armor kits anymore
@solid thunder Like a swear jar 😄
Sounds like Durex Extra Durable :p
Not gonna l
@dreamy hazel yeah.... my clock stays at just shy of 4.1, but i have seen temps hit 92 before dropping bck to 85ish
@cloud flower "heat fins.... for her pleasure"
Don’t know if that VRM channel cooling really worked, but hell, they worked with Noctua fans
8 attemps at sending results and my points keep dropping 😦
i run my cpu in the 90s but it never throttles at least
lolwut
WeeemRCB with 8 heat pipes! for her pleasure...
@hallow tiger The ladies like...
it's not my 3900x running calcs right now
i just finished a WU and within 2 minutes i got another
i just run WCG on cpu since it does something at least then
i havent had cpu WU in a while
honestly with that cpu it's not that worth it
havent gotten a single WU all morning :(
pause and restart it
it resetd the timer it checks the server for WU
(every time it pings the server and doesnt get a WU the timer gets longer)
yeah ive been doing that once an hour
ive gotten 16 gpu WU in the past 24 hours
i am confused how do i earn the point because i have been working for 1 and a half hours and havent gotten a single point
mines points aint even showing
you have to submit a complete WU and then wait for the score to be updated
(it updates every 3 hours)
oh okay thx for the help
My points didn't get "allocated" for 2 days. then all of a sudden the missing points showed up
is there somewhere you can check how many gpu WUs you got in the last 24h?
yeah its cause their servers are being slammed since the ltt video went up
i just see this from XOC
wooop wooop
but that includes CPU
i have anoth wu going on the i3 6006u pc
i'm just sat here with my WU like
yay after about 32 hours of looking for work units, my cpu finally got a work unit worth 300 credits
its 10% done already
@solid thunder gpu cans can go up to 4000rpm i think . just crank it on max
I think they just added more now since there hasn't been any
My CPU one is base 1000
even my macbook gets 1000 credit tasks
wait really?
estimated credit 6379
how come my gaming laptop cpu gets a louse 300 after 30 hours of searching
E PPD 49656
what's the url for boinc?
bad luck of the draw I guess
how come my gaming laptop cpu gets a louse 300 after 30 hours of searching
@rancid flume how many steps does your wu takes?
you have to have a passkey to get above the base credits and you have to do at least 10WU to get all points
project url my bad
@rancid flume in the log
125,000
should look like this
you get more points the faster you finish the task
yea thats a light wu
how long does it take for that 125k step WU?
11:31:37:WU01:FS00:0x22:Completed 340000 out of 1000000 steps (34%)
my current WU
11:30:41:WU00:FS00:0xa7:Completed 25000 out of 500000 steps (5%)
it says 2 hrs remaining
for CPU
yeah 2h for a small WU isn't going to give a lot of points
11:32:27:WU01:FS01:0x22:Completed 90000 out of 1000000 steps (9%) GPU one
hey but my gpu is dishing out 100k ppd
rip mines 1000000 steps in one hour
I had many 60k-300k GPU jobs in the last 2-3 days. For none of them I got any points. Is it common at the moment that the score is that much behind?
I had many 60k-300k GPU jobs in the last 2-3 days. For none of them I got any points. Is it common at the moment that the score is that much behind?
@distant sparrow yep
k
each of my WU i get are about 1 hour to complete and on avg net me 170k points
but im doing gpu only on my OC 2080ti
Nice
those rock steady temps 
Water?
yeah
Nicely done
3745868 ppd on just gpu
damnn
highest ive reached was 2.1M on 2080 super
but i havent done any OC
maybe i should 😄
Sadly I need to upgrade my GPU, probably will do that after the whole lockdown mess
my gpu is sitting on the FS leaderboards at #37 for just graphics score on a single gpu globally
my 970 has treated me well but time for an upgrade
In F@H: I support research fighting I just leave that on "Any disease" to try and support COVID-19?
@coarse citrus How quickly are you processing WU with it?
@dusty zinc yep
@dusty zinc yup
covid is prioritized
Yeah, there is no specific drop down for COVID
I was wondering the same thing... thanks
sweet
@dusty zinc Every one I've had has been Covid
i've mainly had covid
The fans are going crazy at medium, 10 year old cpu the issue...
i had issues with my gpu getting assignments (it wouldnt try to get them) so i removed and added the gpu in configure and it fixed it
@sonic crane
Is there a way to see the top 5 leader teams somewhere? I think I saw someone post it the other day
F@H stats folding teams overall rankings. Help Folding at Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
@dawn gazelle
ty
heres the non xoc page
F@H Aggregate Teams Summary. Help Folding at Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
oops
yay! finally got some work to do!
GO TEAM!
^ ignore the teams monthly stats, it's wrong
FzR dontdie x, I hope that fixes it
you should see attempts and next attempt numbers moving, the next attemp is updated every few seconds until you get assigned work
found here
mine is working rn so i cant show you an accurate example
Would be cool if it went a bit more to 1 exaflop
If it is just unknown?
it might get close to an exaflop if there were more WUs available
were already faster than the top 7 supercomputers combined so thats cool
Yip 😄
meanwhile, rosetta at home's running at about 1.2 petaflops. sucks to only be able to use CPUs 😦
and more than twice that of Summit
even more impressive because summit's 148 petaflop figure was from linpack. I bet folding isn't as flop-dense
HI all! new here! I have 2 machines. Do you know if I have to setup 2 folding identities and ask for 2 passkeys? Thanks!
nope, you should be able to run both under one identity
Thanks!
put the one passkey in both
afaik it's even possible to control both from one
Lol I was just about to share the aggregate link
Just like I'm doing!
I tried to control both from one, didn't work too well
yeah, ehhhhh
No matter what I did, wouldn't work
Really? im controlling 4 from one
i think you can monitor multiple clients from the adv control though
lemme try again
I might require some advanced setup it you want it to be reliable, but I have two setup
- Installed Ubuntu
- Installed Folding
- Installed Nvidia drivers and OpenCL.so
- Set static IP in netplan
- Set remote password and allowed ip-range
- Connected client via "+ Add" in bottom left
Come at me virus breh ....
even shows an Estimated Total PPD in the lower left
Mine are running kinda average right now. My main CPU isn't running (3950X)
Though the PPD number is kinda useless IMO if they can't assign WUs fast enough
i came, and i conquered
but it seems to have gotten better since I started a couple weeks ago
That makes me wish I just spent the money on a 2080 Ti
Though I would be like $700 more in the hole than I am, lol
What I love is that my 1700X is 10-110% faster than my 650 Ti 😂
It almost makes me want to unplug my 650 Ti since it does so little, but I guess that little bit is better than nothing
too bad they cant use some h.264 encoding id get my stream card to encode/decode for them lol
It'd be sick if they could. I wonder what kinda performance that would be, considering H264 on a 3950X is worse than Turing NVENC, and it can use almost all of the 3950X for 1080p60
Like imagine all those NVIDIA GPUs pushing out an extra 300k-450k PPD
i have an elgato pro pcie stream card in my rig that has a dedicated h.264 encoder
HD60 Pro?
yeah
I didn't know it had a dedicated encoder. I also have one
yeah
I wonder if it's any good (for streaming at least)
CRF/CQP is nothing in comparison to CBR with a tight bitrate
i came, and i conquered
woah i wonly have 20k
Well right, recording. 60 Mbps is huge and can pack a ton of detail, which is good, but even a stock 3570K can do that no problem
Did you see the Estimated PPD @small current ?
on?
20k total points?
On that screenshot
What?! That's prime time to fold!
my 1080Ti is 1.5-1.6Mil
Anyone gotten any WUs the last hours?
quick one.. 180249 PPD for 3700x and rx580.. that is that like in line to what i should expect?
i have 3 wus running
yes just finished one
That seems a little low, but I'm new to this. PPDs seem like they can vary
i just rebooted a computer and got 2 right away, 1 cpu and 1 gpu
working on the second gpu
For example, my 1700X hit 95,000 PPD yesterday, but is currently sitting at 55,000 PPD
i have a 1070 and i7-4790 no wus the last 8h
Pausing and Starting again seems to help you get WUs
as far as i can tell the PPD varies by the exact job you're doing
i have done that all day
setting up my other rig, what do we put in Stats links?
yes pausing and restarting makes i t ask for WU more often
also pausing and starting may help you get more WU but the main issue is they are overloaded, and spamming more requests will make it worse
Adv control is saying like 601500
true i only do it after about 15 minutes
well, i get quick responses in the log saying no avalible wu
and its steadily rising
seems to only ask two IPs for WU, is that same for you?
spamming more requests will make it worse
Ah, my bad
and nope, remote clients isn't working for me.
The general rule of thumb is if your next attempt is 2 hours or more then you can pause and restart
I'm amazed that we really are trying to learn everything there is to know about this
I've seen as least a few dozen different project numbers for cv
if you want i can help sort remote clients @cloud flower
There's over 20-30 I believe
That would be great
https://apps.foldingathome.org/project.py?p=14328 This looks like close to the full list, with many being added
What I've done so far:
on the other rig, I opened advanced > Configure > remote> set a password, checked ports, set allowed IP range
anyone putting their folding rigs in the toilet to use as a heating unit?
similar to mining
I've seen a lot of cv projects in the 117xx range, and the range you showed Hiitchy
yeah Covid is 117xx and 13850-51
Lol that seems like good and bad idea at the same time, lol
Moisture build up
we are coming out of summer here in Australia... its been rather cool the last few days.
I just opened my window since it's cold outside
the ventilator is real strong. my toilet averages 16% humidity
The weather has been pretty nice
I haven't turned my heat on in months because of the heat from my PCs, lol
then again I'm referring to Canadian weather
when i shower, the humidity goes up to 99% but after i leave its back to ~15% in about 10 minutes
i used to mine in winter - suck air from outside, warm my office
my room is always a few degrees warmer than the rest of my house
Already started doing oil changes on my car, my neighbours have been asking for me to do oil changes on their car
how did you configure your iprange @cloud flower
much hotter
@rancid flume Do you turn your fan on
shower ventilation fan? yes
okay, was gonna say lol
My internal IP range is 172.16.102.128/25, at the bottom of the configure/remote you can set the allowed IP ranges and blacklists. so I set my range on the whitelist/allowed
I just realized
172 is local to your PC, not your network. Your network should be 192.168.x.x or 10.x.x.x
13850 is binding proteins now
It was separated previously
and took over days to complete
No, I use 172 INTERNAL range.
my external is something else
172.16.0.0/16 is also an internal range.
???
Oh I didn't know that
or 10.0..
I thought all 172 was just local to your pc 😅
people mainly use 192.168 and 10.0 cause.. easier
I always mix them up
172.16 / 172.25 / 172.26 are like... Cisco ranges
so the PC you want to monitor with (main PC) is 172.16.102.128 right?
That's how I remember them
no, 128 is the network, with a 25 subnet. 172.16.102.130 is monitor pc
102.198 is client1
Wait what exactly are you trying to do?
then add 172.16.102.130 in the advanced monitor on the monitor PC
you mean 172.16.102.198 in the advanced monitor on the monitor pc?
otherwise it would be monitoring itself
wait, interesting. I got it. Ip's were all right. Ports were right in configure but the remote port had somehow become 36331
hmm
well all mine have different ports
but ive seen several that use the same port and it seems fine
Maybe you accidentally had the port selected and pressed an arrow key instead of tab?
NP
I find myself doing that often, because people are bad at making websites/applications
sometimes all it takes is another set of eyes for a sanity check
^ so true
yeah, we tend to over-compensate for other things and end up doing the same on good things
😛
i make mistakes big enough ray charles can see em
you mean like people buying lifted ford F350's for no reason
Hi everyone, i installed folding@home but it doesnt seem to be working? im not sure what i need to do to make it work
people buying 2080ti's for rocket league
okay that's a better comparison
I'm buying a 2070S and R7 3700X to help throw out some folding power
@indigo echo That's normal. There's so many new people servers are having trouble handing out work
Hi everyone, i installed folding@rancid agate but it doesnt seem to be working? im not sure what i need to do to make it work
@indigo echo you need to use your own username probably
yup
Oh thats a good news then. thank you for the info 
wait @indigo echo did you set your user to LMG-Jakkuh?
Also, on the stats links options in preferences, what do we set? our nicknames?
hey got another WU
yes @hushed bobcat
Believe me, it's worse than you think A LOT of people have WU's and a lot of new people think there's something wrong with their PC's
truth is, the servers only have so many WU's because they're oversaturated with requests
use your own username
And get a passkey ^
yes and get your own passkey
@hushed bobcat i'll do that 😄
I lost a few thousand points when I started because I didn't have a passkey 😦
well its a laptop so
It's not a laptop
6500t was mobile was it not
It's this
I have folding running with 4790k 1080ti and an old r9 280x. But I can't get the 280x to work is this because off their servers or is it my config
This is definitely not a laptop hehe
Is this correct?
you need to add a GPU slot @chrome iris
ah may be detecting its a laptop since it has mobile hardware
removing your GPU slot and readding it seems to wokr
Oh, I have one of those standing on my desk, was supposed to be installed somewhere else, I just set it up and then it have just been sitting there xD
I set it up and left all the gpu index at -1
I had to manually set my GPU indexes and cuda because for some reason it's swapped 
I in installed it then reinstalled it and added it again still same problem
post pic please
It might also help to see your log
Team orange!
Just keep getting this error
Oh lol
Have both updated drivers installed
it looks fine
you're just waiting for a work unit
can you post just the logs from slot2?
cant get assignment means that it asked the server for a job and the server said it didnt have a job for it to do
We need pinned messages lol
There are but I doubt people would look at them in the first place
It'd be better to have a #folding-info channel or something
Well that's what this channel is
but tbh I don't mind helping people
I've got nothing better to do since I WFH until next week
I never look at pins unless I'm looking for something specific that I said
I'm literally getting paid to do nothing right now
Just stare at a remote desktop connection of cameras I set up remotely for a site over a server
that's it
Lol that's awesome
it's boring lmao
But still
Well, they're updating the configuration requirements
So its just the full servers and not a borked setup
keep an eye on the logs
Do each project differ to other?
if you get a job and you see an OpenCL error then you have a config issue
K awsome thanks
this is going by too fast lol 20% in 10 minutes


I mean, you have a killer GPU, but I think it still depends on the job
well, the community thanks you for your contribution 😛
this is a smaller job
and the world I guess
I've gotten jobs for my 2070 that are anywhere from 30 mins to 3 hours
it was a 40 minute eta when i started
My CPU
I really want to know what their 6x Titan V setup does for PPD
I'm wondering if it's worth throwing an HD 7950 into my other rig to fold but not sure how helpful it would be
i want to set up my laptop with its 8750h and 1070 to see how it goes
If they're similiar to the 2080 Ti, then likely 18-21+m I would guess
While my GPU got the heaviest project that I got recently
It apparently does a lot better than my 650 Ti based on that spreadsheet, so I'd say go for it
id say thats worth it
My 650 Ti is getting 40-50k PPD
Ok lemme throw it in then. It's just sitting gathering dust
Started a few days ago when they uploaded their video. Think im doing pretty good cold here in ireland but dont need heating anymore.
Is there a reason the AMD GPUs seem to be insanely good with this?
high core count
^
342,277 points so far
thats also why GPUs slay on here cause of cuda
using 8 cores on my 8700K gets me 100k PPD
you know, it wont help MUCH but I'll throw my server at it too. It's old
I think amd gpus are better for compute as well
8 cores on my 8700K
Threads?
I haven't even thought about upgrading my 1080 TI in years...don't even really game much anymore...and now I come here...look at a spreadsheet, and want to upgrade.
actually it seems nVidia is a little stronger folding
Xeon processor so.. will have some input at least
@vague flint yes i keep doing that
GRRR @ attempts https://nuku.neko-network.net/screenshots/6116rP6w4db0.png
so is it a 9700k or a 6 core 8700k
there
i allocated 8 of the 12 threads to F@H
i leave 2 for the GPU
and 2 for the rest of the system
i leave 2 for the GPU
What exactly do you mean? What does this do?
ok so 8700k
You need at least one CPU core free so that the GPU can talk to the system
yes you need 1 CPU core free for each GPU in the system
Otherwise you take a performance penalty where the GPU ends up stuck waiting for the CPU to be free
the gpu WU still needs cpu for some AVX loads that are part of the gpu WU
but i found my 1080Ti gets a little more PPD if i leave it 2
kinda a fine balance to tweak it all right
Do we need to specifically configure the cores? What if we just leave it as whatever the default is?
Guys, does overclocking makes a difference?
i used Process Lasso to set the affinity for each task
yes
@dawn gazelle you can leave it default, im just trying to min/max
a rock stable OC can increase your ppd but if its unstable at all you will either BSOD or the WU will fail and not complete
@pine cradle yes is does make a difference, but be aware if your setup is even a little unstable it will throw out all the points you earned
So you gotta be sure your OC is stable otherwise it's not worth it
Ah.... maybe that's why my 1700X went from 90k avg to 50k avg when I increased the threads from 14 to 15 with 2 gpus... lol
my +115/1200 helped a good bit on my gpu
holy crap it literally just doubled 😂
there you go
My room smells like computer parts right now
thats bad
wow 88C
also, that's with the OC
id pull that OC off
TBF, my 650 Ti is running at 81C, but I can't adjust the fan curve past 30% and I didn't clean it or check the thermal paste yet >.>
What case do you have? And what's your fan setup?
sounds like you need more airflow
Oh thank god, I didn't know Tctl was just for fan curves and has an offset.
i pulled my front fan filter off my case since ive been running F@H for over a day now non stop
more airflow
^ same
my gpu has yet to see above 50C and cpu is staying around 60C
does opening the case help cool down the entire rig?
yes
more air= lower temps
if you have poor case airflow opening the side panel helps
77 on that isn't bad
i also have 3 rads and 9 fans in my case
then I'll just gonna bust out my stand fan and beam it into my PC
i have enough fan in my case that opening the side panel is only 2-3C difference
Filipino style
side panel depends. Having the front off would probably be better
depnds on case airflow
lol
imdoingmypart.gif
I found the fan on the front was much better than the side panel. Even though it could push a lot more air on the side, the GPU and especially the CPU prefer from the front
lol
That's a big flop.
Wasn't it at 470 PFLOPS just a few days ago?
I guess they finally got some new hardware results?
But still, my WU is now at 5 hours of ETA
I.E: It'll probably be even higher in a couple days? Lol
With the servers lagging, it's been complex to get ahold of information in real-time.
Yes it was 470 TFLOP
well i mean
And before it was 470 it was only like 50
3/15 week F@H completed like 15X WU than normal
scientist using F@H to make global warming happen so they can keep a job
now its back to mornal trajectory?
hahaha
what do you mean now?
normal* ffs
the week is only half over
but the shortage of WU is hurting
Hopefully LMG can get that extra work server
Hoping they can get it within a week or so
The more people that help out, the better
not just folding, but server hosting
afaik, Azure servers are pretty expensive aren't they?
i have a PC doing Rosetta@ Home
i find the blue background of the F@H web client a little misleading since they are melting everyones rigs in the name of science. they should use the elmo fir gif i posted above as the background
do you guys experiencing gpu wu shortage atm?
im 46 attemps in and theres no work for me
ive heard that helps get WU for F@H
Like, I wonder what sort of hardware the work servers that currently exist use, and I wonder what sort of hardware would be useful to saturate their internet as much as possible within reason, as well as their power and thermal budgets, and just raw hardware to compile WU assignments
