Only the 1060 get any
#folding-and-boinc
gusty path
wheat lynx
waiting will cost you hundreds of thousands
my PPD is 580k
ive gotten 100k in 1 day
gusty path
Not sure if it is the point updater not displaying properly or I have lost 900k points already
stone flower
smh google cloud costs per hour and my vm is stuck doing nothing because no wus
fierce steppe
EOC's latest update failed
wheat lynx
wonderful
fierce steppe
check again in 2 hours
wheat lynx
that just sounds like a waste of money
stone flower
normally my VM is rendering
but since I have nothing to render atm
wheat lynx
the point is to use hardware that would be otherwaise sitting idle
stone flower
good point
green monolith
well that system has been powered and idle for a couple weeks, thought i'd put it to better use
small current
i have 16 attempts no wus
dreamy hazel
been idle for an hour now, both cpu and gpu. will change at some point in time
green monolith
mine is working right away
dreamy hazel
i only started folding this morning, had 3 WUs for my cpu and one for my GPU, nothing since then
but yeah, it's just the distribution servers bottlenecking
yes
glass path
I mean
glass path
well I give up explaining still thanks
dreamy hazel
?
green monolith
well a ton of users started folding within the last few days
odd barn
a LOT of people have been folding
green monolith
they need to build out the servers themselves to handle the load
glass path
running a CPU task on my laptop always make it throttle to death
odd barn
but that doesn't mean we don't need less people, more is always better
dreamy hazel
more than 10x increase
serene swallow
which is great
odd barn
Yeah
I use to fold and would always have a LOT of WU's for both CPU and GPU, but since we heard that F@H is doing research for COVID, there was never a better time to start
serene swallow
im really happy i found this, i rarely do intensive stuff on my pc, and this is a great use for it
glass path
And after some tweaking and undervolting my CPU I found that I can run a GPU slot only when having reasonable temps
green monolith
we need some IRC back!!
glass path
So I'm asking is it okay to not use my CPU(or, having a CPU slot)
green monolith
GPU is fine
serene swallow
ive only been using my cpu, as my gpu is older and less powerfull, and im kinda worried about breaking it
gtx1050
green monolith
i told it to finish the CPU task and then pause now its just using my GPU
serene swallow
single fan
glass path
And if I'm sure not using my CPU should I dump the task
green monolith
dont want 2x Xeon E5-2650 v2's to cook my room
dreamy hazel
it's especially important to note that it's a common trend for things like this to spike once people like Linus make people aware of it (i, for example, never even knew this F@H thing existed) and it will boom for a short while, but then over the course of a few days or weeks it'll become much less people. Still way more people than before the boom though, so the entire project is happy to see anyone joining
glass path
I did some distributed computing before and some says detaching task is better than letting it time out
So does this general rule still apply here?
odd barn
Honestly, the only people who will stop are those that lose interest
But how can you lose interest in something running in the background
dreamy hazel
or those worrying about their electricity bills
green monolith
or they see their power bill
fierce steppe
Do you have an active CPU project currently @glass path ?
fierce steppe
If you're not working on an active project, if its just waiting, then you can remove the CPU slot.
green monolith
my power bill is already 311/month USD
glass path
@fierce steppe yeah but I paused it since it puts my CPU at 95C
odd barn
BRUH
My power bill is like $104 Canadian
this F@H stuff will only make it go up $20
that's fine with me
dreamy hazel
i don't know how to view my pc's power draw, but i would assume a Ryzen 9 3900X can be a bit powerhungry
glass path
green monolith
thats prob why my power bill is kinda high
silver wing
$311 lol, get some solar
fierce steppe
@fierce steppe yeah but I paused it since it puts my CPU at 95C
@glass path Ah. If you can it'll be best to set it to Finish where it will stop after it finishes the work unit it's currently on and not start another.
Dumping a work unit will count as a failed WU and it can make you ineligible to receive QRBs
green monolith
@silver wing sure let me put it on top of my apt complex
glass path
Dumping a work unit will count as a failed WU and it can make you ineligible to receive QRBs
oh no i accidentally dumped one before i returned my first task
odd barn
Our rates are weird
Off-Peak 10.1 cents per kwh
Mid-Peak 14.4 cents per kwh
Peak Rate - 20.8 cents per kwh
We're getting our rates lowered to 10.1 cents per kwh indefinitely
silver wing
Go for it, who's going to notice 10 large panels anyway ๐
green monolith
lol
dreamy hazel
my bill is 60โฌ a month, which is a lot considering I live alone and i'm not really earning too much as an apprentice
fierce steppe
Should be fine if you dumped one... I've had a bunch fail due to unstable OCs and stuff..
You need to maintain 80% return rate
odd barn
That is a lot
green monolith
lets see current power draw of that server, what IP is my idrac for that......
odd barn
One thing you can do to lower your electricity bill is to replace your lights with LED bulbs
only turn on what you need
fierce steppe
Do they still sell incandescent bulbs?
dreamy hazel
only got LEDs
green monolith
gah what IP did I assign to that R720
glass path
You need to maintain 80% return rate
is that stated anywhere on the site?
dreamy hazel
also, windows
green monolith
folding
fierce steppe
green monolith
senko-idrac | PowerEdge R720
gusty path
My 1080 finally got a WU!
green monolith
there we go
pallid cedar
So been testing and it turns out that (in response to my own question earlier) that if you have low selected it never uses the GPU - this is a real shame as I don't want my CPU set to medium whilst I'm working but I'd like to donate my GPU time. ๐ฆ
fierce steppe
@thick holly what was that question you wanted to ask earlier? Did you get an answer?
gusty path
thick holly
Yes you posted the link, that is how I was able to see ๐
dreamy hazel
on CPU, you can select specific cores to use for folding or just disable it generally @pallid cedar
lean spire
So been testing and it turns out that (in response to my own question earlier) that if you have low selected it never uses the GPU - this is a real shame as I don't want my CPU set to medium whilst I'm working but I'd like to donate my GPU time. ๐ฆ
@pallid cedar then justy set cpu topo run when idle in advanced
lean spire
also cpu runs are rare anyway ive never even gotten one
gusty path
I have gotten 2
pallid cedar
I always get them.
dreamy hazel
i had 3 today
green monolith
@odd barn i more or less have 1100 Watt PSUs in all my R720s so they can handle a proper load
glass path
Last question: I see I get the base credit when I returned a unit before (and I know i'm still not eligable for QRB yet)
Does estimated credit calculates QRB?
green monolith
2x SFF and 1 LFF
pallid cedar
@lean spire I see what you mean. Hmm it's not as confiurable as I'd like. I'd like to set GPU to medium (any time) and CPU to low (any time). I don't think I can do that can I?
silver wing
Pitty I like the 12 drive LFF servers
lean spire
not that im aware of @pallid cedar
pallid cedar
Thanks.
green monolith
well i like PCIe slots and the 12 bays i saw tool space in back for the 2.5" options
as my other 2 run proxmox and all that jazz
crimson sorrel
I am not getting any work units, what might be the problem?
dreamy hazel
just wait
their servers can't keep up with the preparation and distribution of the work units, so patience will eventually give you some WUs
pallid cedar
@dreamy hazel the core option seems to be the best idea.
silver wing
Yep, dual 2.5" rear and 12 bays in front. All the 2U servers do that and it's really nice. Really hated having to waste 2 bays in the past for OS
thick holly
I wanted to see the stats of both my computers combined. I was able to see my total by going to https://stats.foldingathome.org/donors and entering my info
fierce steppe
Last question: I see I get the base credit when I returned a unit before (and I know i'm still not eligable for QRB yet)
Does estimated credit calculates QRB?
@glass path Without the QRB you'll just get the base credit amount.
fierce steppe
Yeah, it's based off the estimated time for you to finish.
glass path
thanks a lot
Think I got what I need to know for now
fossil trail
lol so all 14 of my workers are dead atm
fierce steppe
Ayyy, Folding@rancid agate twitter retweeted LTT's folding video
green monolith
nice
fierce steppe
I'm surprised Home hasn't changed their discord name yet ๐
odd barn
Lol
Their ISP wouldn't care
All Telus cares about is getting thousands of dollars for the 10Gbit connection
warm vale
didnt they contact their ISP for security issues?
green monolith
well if its anything like thier MC server and their firewall cockblocking almost everyone , that will be fun
warm vale
i think they mentioned it in the video or wan show
celest bloom
Ayy I got an estimated 1MILL PPD between my 3 folding machines
gusty path
That estimate vs reality makes you cry
fierce steppe
Yeah I'm estimating like 1.3-1.6M PPD but have only [just] broke 1mill twice in the last 2 weeks
gusty path
Think my estimate is around 4,5-5m between my machines atm, and I got 300k
fierce steppe
celest bloom
Yeah, figures as much. Im just impressed all three machines have all folding slots filled
lusty trellis
For anyone using linux and nvidia you can change the TDP of the card (limit) to avoid high temps
(or possibly overclock it :D)
dreamy hazel
woop woop, new gpu WU
celest bloom
grats!
dreamy hazel
seemed like they did better this morning, but it definitely went down again
Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
this again tho
weird
fierce steppe
Does it only happen when you start a new WU?
dreamy hazel
yes
fierce steppe
Yeah that's fine you can ignore it
dreamy hazel
got an eye on gpu temps, 76C is fine
not concerned, my gpu should be trustworthy enough to handle this
just wondering what might cause this message to show up
well, actually last time I saw it it was in the middle of a WU
but only once
fierce steppe
I'm not entirely sure, but I believe there's a flag you can set in the advanced settings to make F@H shut down if it reaches a tempt limit you set
by default it doesn't have this set and leaves it up to the GPU
dreamy hazel
hm, yeah, might be that
lusty trellis
For anyone using linux and nvidia you can change the TDP of the card (limit) to avoid high temps
@lusty trellis https://devblogs.nvidia.com/increase-performance-gpu-boost-k80-autoboost/ HOWTO
kindred raft
69 work units
fierce steppe
13:20:29:WU01:FS00:Final credit estimate, 9405.00 points
Um excuse me where is my QRB
rich depot
Lmao 69
rich depot
It's normal I think
fierce steppe
Task manager is dumber than HWmonitor...
Change one of the GPU graphs to Cuda/Compute
rich depot
Eh, use HWinfo tho
hallow tiger
@dreamy hazel Yes. Go to Task Manager and select to see Cuda ... it'll be 99-100%
hallow tiger
@dreamy hazel I did the same thing at first ๐
dreamy hazel
funny how simple games still work perfectly fine though
fierce steppe
I've been playing a lot of Slay the Spire lately, runs fine when folding with minimal drop in points
dreamy hazel
Osu still fluent
rich depot
looks like I haven't had a task for like 6 hours
you are doing a to good job you all, leaving no wu's for other people ๐ keep it up
dreamy hazel
lul
just now noticed how my current WU's eta went from 5 to 7hrs though
guess that's why osu runs so well still
ยฏ_(ใ)_/ยฏ
lusty trellis
I'm getting a lot of WU... maybe a new server spawn up? o.O
fierce steppe
folding at home should run with low priority, so other tasks (gaming) will take priority over it for resources
dreamy hazel
yeah
i want to see what my cpu will think of a new WU while i play different games
I mean, that's mainly what I got the 12core for, doing other tasks while playing
rich depot
I'll just close the F@h software for a bit. did a ram upgrade yesterday (from 16 to 32gb) so gotta test for a bit how much impact it makes on certain jobs
forest belfry
my desktop gpu getting a job after job while laptop is not doing anything
annoying
fierce steppe
๐ก there you go
dreamy hazel
you're literally the wise man that magically knows everything that was asked in the past 5 hours of me being in this discord :P
fierce steppe
RAM has zero impact on folding (unless you have too little RAM, like 2GB system total)
rich depot
@dreamy hazel no I know, but it is for photoshop and stuff. Thats why I'm closing F@h since I'm not getting any wu's and go do some jobs in photoshop and video editing
fierce steppe
Should be right with 8GB or more
dreamy hazel
ah, sorry :p
rich depot
no problem
dreamy hazel
what about ram speed and ccx communication though?
fierce steppe
Ah yeah, if you're doing other RAM intensive stuff then that will help
dreamy hazel
does that matter?
rich depot
do you also know when they will get new servers up?
dreamy hazel
they're working on it as fast as they can, i'm sure of that
rich depot
oh yeah I know
dreamy hazel
as for a specific point in time, not really
rich depot
just messing
fierce steppe
Don't expect it any time soon
dreamy hazel
yeah, setting that up with a certain degree of security (since the internet is scary, as we know) there's no good point in rushing things
rich depot
true
lusty trellis
yeah, setting that up with a certain degree of security (since the internet is scary, as we know) there's no good point in rushing things
@dreamy hazel Internet is not scary - just their users ๐
rich depot
last big project I was in was from the archive team, which was less security dependant, so easier to scale
dreamy hazel
my IT teacher during "college" was literally drawing the internet as a cloud with an evil smily in it
rich depot
added 16gb ram to my system yesterday. I need more
mild kiln
+16 GB Geheugen
dire linden
but, why?
rich depot
this was scrubbing through a 4k timeline in premiere
it puts everything in ram, once I stop scrubbing it drops down again
dire linden
ooh. thought it couldn't be for folding
mild kiln
RIP Q6600. Was gonna leave it overnight but turned it off for some reason
dire linden
gotcha
mild kiln
maybe cause wifi light will distract me for a snooze
small relic
is it normal that only the gpu gets work while the cpu gets nothing?
gusty path
yes
fierce steppe
There's a lot of demand at the moment so it's a bit hard to get work units consistently atm
CPUs seem to be worse off at the moment
small relic
i see
fierce steppe
I guess every system has a CPU but not every system has a dedicated GPU
mild kiln
yeah
fierce steppe
but there are also more GPU WUs being generated
67k GPU work units being assigned per hour
37k CPU work units being assigned per hour
small relic
does the gpu clock speed affect the speed of work?
mild kiln
uh IDK about thjat
gusty path
I imagine it is like everything, the more powerful the GPU the quicker it can get it done
mild kiln
I was thinking of downclocking my GPU to get away from 82 C but 82 C seems to be safe for RTX at base speeds
fierce steppe
GPU core clock does yes.
Just don't push it too high where it starts crashing, then you will start failing WUs
I just let GPU Boost do its thing
small relic
ahh i see
mild kiln
I need to find my old fan hub
fierce steppe
As long as the cards cool it'll boost up (and its not being limited by power limits or anything else)
mild kiln
think I may need to add a extra fan on a Vostro case
though dunno where a 120 will get cool air from a cramped space with small metal holes
wheat lynx
noice
small current
sorry its like that i have 2 screens and it too pics of both of them
mild kiln
nice
rotund flume
im going too
first gpu wu after a bunch of crashes
First 1000000 steps wu as well lets go
small current
got a wu
wheat lynx
long one i guess
small current
when i was not at home
lets see if my other pc is doing okay
yep
got a wu on that too
rotund flume
11758?
burnt orbit
rich depot
I'm a bit worry that we may storm Linus server like his Minecraft server
burnt orbit
Is this normal??
wheat lynx
yes
fierce steppe
Yeah, it's normal. Not an issue with your setup but its an issue with their servers.
rich depot
Yes
wheat lynx
@rich depot WE wont get to choose server so that wont happen
fierce steppe
Just lots of demand on the servers and not enough WUs to go around
burnt orbit
Alrighty, thak you guys.
wheat lynx
i have a cpu one that has an ETA of over a day
fierce steppe
LTT: 530M pts
Default: 505M pts
Woot we beat them again this update (also includes last update pts since that didnt run)
dire linden
hey
wheat lynx
i just realized i have 63k points
dire linden
i got ryzen 5 3600 and my temps are reaching 87 degrees, should i do something or?
fierce steppe
can you increase the fan speed?
dire linden
read it'd be better to keep under 80
wheat lynx
well @dire linden mines the exact same so were going down together
dire linden
i can stream it in voicechat
dire linden
i think i could
wheat lynx
when gpu is running
dire linden
join me if you can ๐
visual lily
I just cranked the fan speed on my CPU and let it boost up to 4.05GHz or so and now my GPU doesn't want to clock super high for FAH for some reason?
Like, the ETA has gone up
humble stratus
Hi have RTX 2060 super but i cant seem to get a project to do, it says i have already attempted 8 times, do i just have to wait...I have previously done some WUs and have 60k point but are struggling to get a project/WU to do...Any help?
fierce steppe
Yeah, just wait...
If you look in the advanced control how long does it say for the "Next Attempt:"?
small current
they cant keep up handing everyone jobs
humble stratus
4 mins
small current
it took me 20+ attempts
fierce steppe
Yeah if it's just a few minutes between attempts just wait
rotund flume
too many ppl doing great work for human mankind, the server cant keep up with it ๐
tight grail
Is there a reason and does it matter that FAH sees my R9 380 as R9 200 Series?
small current
rotund flume
nice
visual lily
I'm still so confused aaaaaaaa
Gpu is really not wanting to put a whole lotta effort in
rich depot
Better than my temp tho
small current
and now 2 of the cores are dying
rich depot
Dang boi
rotund flume
I just cranked the fan speed on my CPU and let it boost up to 4.05GHz or so and now my GPU doesn't want to clock super high for FAH for some reason?
@visual lily power not enough? just asking
visual lily
That's what I thought, but I've got a 650w gold psu that should be enough, I think
rich depot
to much heat in the system?
visual lily
GPU takes like 200w at max, and ryzen 3700x is hella efficient
rich depot
Set it in mid or light if you have heat issue
dreamy hazel
cough
empty island
anyone know why this isn't sending? its been like it for an hour and the logs don't mention about trying to upload
rotund flume
only 63c tjunc, cant be heat
visual lily
My CPU is up to 81c but it's on PBO so it'll clock down if it starts to not like its temps
fierce steppe
Possible failure to upload completed WUs 11753 & 11758 to work servers 155.247.164.213 & 155.247.164.214. F@H are aware and are investigating the issue. Read More...
rich depot
Well ^
rich depot
Too much people are sending and their server can't handle it
dreamy hazel
same here tikho, mine keeps it around 81-82C
small current
render things in software
rotund flume
Possible failure to upload completed WUs 11753 & 11758 to work servers 155.247.164.213 & 155.247.164.214. F@H are aware and are investigating the issue. Read More...
oh no i just start folding one, but tbh it might finished when servers are up
dire linden
can i check how many operations my cpu finished and how many gpu?
rotund flume
your stats
rich depot
^
visual lily
If I disable PBO my GPU still isn't going at full throttle so it's not that
This is so weird
fierce steppe
Stats are combined, no way to see which were CPU or GPU
small current
so i have a problem
dire linden
just shows me total WUs
small current
i need a wifif extender
rotund flume
Stats are combined, no way to see which were CPU or GPU
@fierce steppe ok
small current
but i need to plug in my second laptop
...
no free plugs
unless
*starts moveing things in my room around
moving
dire linden
as i see cpu running all the time, got 4 wus but i know i've seen gpu work once and it finished in minutes
visual lily
Pausing my CPU folding spot and my GPU immediately jumps back to full power
Power consumption goes down to like 70w with cpu folding on
hallow tiger
I'm getting back-to-back WU now. It that the same for everyone?
small current
nope
hallow tiger
hmm
fierce steppe
It seems to work giving back to back work units up until you fall asleep and then it gives you nothing
rotund flume
@hallow tiger me too
small current
ยฏ_(ใ)_/ยฏ
hallow tiger
@fierce steppe Maybe it's when another region of the globe come online and they take over a lot of the work?
small current
i put my pcs in sleep mode when trying to sleep as 2 laptops screaming with the power of a million suns is not easy to sleep to
fierce steppe
That might not be a bad theory...
hallow tiger
@small current Can you not limit the power they use (limit CPU core or underclock GPU) so they keep processing, but at much cooler temps?
small current
nope
fierce steppe
You can...
small current
with the bios nope
fierce steppe
Set the slider to medium and it'll be easier on the CPU
rancid frost
Looks like I'm gonna have to wait around for WUs.
fierce steppe
Power limit the GPU to 75%
from MSI afterburner or whatever software your card uses
small current
the gpu is getting no wus
hallow tiger
I think you can also configure the F@H program and tell it how many cores of your CPU to use
fierce steppe
You can, but you shouldn't edit the slot while you have an active CPU project running
so set it to finish, then when its finished the work unit change it
small current
okay
hallow tiger
For GPU - as @fierce steppe says, drop all your sliders on Afterburner and it'll run GPU WU much cooler
hallow tiger
I have a 1660S in an ITX case (same as Linus uses in his livingroom) and it's a steady 74 and quiet (custom fan curve)
rancid frost
Servers still overloaded or is my inability to get assignments a configuration issue?
hallow tiger
Laptop may be a wee bit louder, but will still manage temps a lot better
rotund flume
@rancid frost server
rancid frost
Good, everything's working on my end then.
small current
i plan for a rx 5700 rig in a mini itx
rotund flume
Laptop may be a wee bit louder, but will still manage temps a lot better
@hallow tiger whats your laptop specs?4
small current
r5 3600
rancid frost
Gonna rig up both machines to do the work.
Junkitron's paltry Piledriver will have to sit out, but its 1050Ti can do work.
green dove
:/ repeated upload failure. No good. (also no new WUs, really dried up in the last day or two, after things were looking better)
rancid frost
The Planet Smasher is ready with both 1080Tis in the meanwhile.
hallow tiger
@rancid frost GPU's process much faster, so not abad thing
deft hollow
Not used F@H for a few years, any reason my CPU would be @ 0.00% or just no units avail?
small current
damn afterburner wont let me edit the fan speed as its a laptop
visual lily
no units
deft hollow
GPU is killing it, but wondered if it was just not doing CPU or something
fierce steppe
Not used F@H for a few years, any reason my CPU would be @ 0.00% or just no units avail?
@deft hollow Probably stuck waiting for a work unit
visual lily
Yeah lots of people are getting a work unit for either gpu or cpu, and no unit for the other
rancid frost
It's not a bad thing, yeah, but the Planet Smasher has an 8700K so it can contribute on the CPU level as well.
Every little freaking bit.
deft hollow
Cheers, not used F@H since ~2011 where it was all CPU based!
small current
(1060 max q)
fierce steppe
Its just luck what you get... But definitely seems to be less CPU work units going around from what people have been saying
small current
no im only getting cpu wus
dire linden
yikes. i had my fans on silent... no wonder it was 87... damnit.... made it full speed, insta drop@wheat lynx
visual lily
I need to configure my PBO to not immediately set my 3700x to 1.35v and make it 82c
rancid frost
It's a good thing the next few days are going to be pretty cool.
hallow tiger
@small current If you're trying to sleep then put all the sliders to the left to minimse power and clock. That should quieten it down so you can sleep and it can keep processing
green monolith
halp
deft hollow
hah literally just kicked in to CPU units as i typed this
rancid frost
I won't have to turn up the heat at all with these babies running.
hallow tiger
@small current Leave it at defaults for now then?
green monolith
48 threads folding cooking mah CPU
small current
k
deft hollow
Better to have 2 slots with less power or 1 with more?
hallow tiger
@green monolith Jesus ... how fast are you getting through your WU with all those running?
rancid frost
Boom, GPU1 just connected.
valid turtle
I'm guessing there's no WU available currently?
hallow tiger
@valid turtle Sporadic
rancid frost
I only JUST got two.
valid turtle
I don't wanna leave my pc on all night just to maybe get one :P
forest sapphire
Morning all
hallow tiger
'sup
green monolith
rancid frost
Temps climbing, might have to hit the fan curve a bit.
forest sapphire
oh y aknow waking up to see I have cranked out 414k points overnight
rancid flume
my cpu can't download wu
"an establish connection was aborted by the software in your host machine"
hallow tiger
@green monolith So about 40mins? ๐ฎ
rancid flume
but my gpu is already folding fine
green monolith
something like that, my poor GPUs look like they suck
or getting more complex stuffs
anyhow thats a Linux host
hallow tiger
@green monolith I see GPU folding also uses some CPU too. My #1 core (6850k) is pinned, but my AMD pc spreads CPU activity out over 3 cores
rancid frost
Alrighty, the glass panel's coming off.
I've created a new profile for this operation. "JET ENGINE"
fierce steppe
mine looks way too complex for my macbook to handle
@rancid flume laughs in GPU folding
forest sapphire
@rich depot hot lol
rich depot
sweating
rancid flume
rich depot
That's a dense af protein
forest sapphire
Yeah Macbook was super warm while doing a wu
rancid frost
It's working, though, GPU1 is leveling out at 68-69ยฐ and GPU2 has cooled right down to 47ยฐ.
rich depot
Tfw I received no GPU wu
hallow tiger
@fierce steppe What project code is it?
rancid frost
Clocks at 2012 MHz and 2038 MHz.
hallow tiger
11747
rich depot
How to set up wu for GPU? Mine is still idling all the time
fierce steppe
Yeah says top left
hallow tiger
@fierce steppe Covid https://apps.foldingathome.org/project?p=11747
fierce steppe
Yeah, all the 11740-11780 are covid-19
rich depot
The 14xxx is also covid as well
fierce steppe
CPU : 13862 - 13863 - 14328 - 14329 - 14337 - 14528 to 14531 - 14572 - 14574 - 14576 - 14600
GPU : 11741 to 11781
odd barn
Should I try folding on this
rich depot
There are some codes are covid but stuck in non specific projects
@odd barn if you have enough cooling power, yeet
rancid flume
just go gpu folding lol. i just saw some guy's gpu folding and my cpu folding would probably take 100000 years to get to that level
cpu folding is useless at this point
sly otter
cpu 5.2k points
gpu over 495k points
nice
rich depot
sweating
rancid flume
cpu folding isn't power efficient
sly otter
I realized that already xD
rancid frost
That ain't gonna stop me.
We have nuclear power here in Illinois, I'm gonna use every bit of those atoms.
sly otter
But my gpu finished an assigment and now it doesnt grab a new one so it is better than nothing
rancid flume
if only i could utilize my $10,000 worth of bitcoin miners on folding 
odd barn
Thankfully I can remote access these servers
Thereโs 3 I could CPU fold in, Iโm not concerned about efficiency
fierce steppe
mine looks way too complex for my macbook to handle
@rancid flume What team are you folding for? I can't find info on 250658
sly otter
@odd barn i have a question regarding remte folding
hallow tiger
@odd barn Everytthing helps rn
rancid flume
250658 is a new folding team i just created an hour ago. I'm starting a folding community at my university 
sly otter
I have another computer, an old I3 that is in my same network. How do I set it up so it can remote fold?
fierce steppe
Oh that's cool
rancid flume
how long does it take for new teams to show up on the global database?
fierce steppe
they will need to submit work units, then maybe a few hours
rancid flume
i see. i guess our team will be visible in about 6 hours then
fierce steppe
Right now with all the extra load it might take longer ๐คทโโ๏ธ
Also extremeoverclocking is limited to show only the top 12,000 teams
rancid flume
the extra load not a big issue
fierce steppe
So your team will need more than 825k points to be in the top 12,000 teams
rancid flume
top 12,000 isn't really our goal though
fierce steppe
but foldingathome stats should show you
rancid flume
i just want our university community to be more involved in the global community
korean universities are very lacking in this aspect
forest sapphire
just got a cpu wu
wind sorrel
Waiting on a passkey. Any idea how long this takes?
wind sorrel
nothing in any folder yet
green monolith
took me like a min to get
rancid flume
i just noticed. 825k points isn't that hard. i'm getting 86k a day on my laptop alone
fierce steppe
Yeah, a system with a decent GPU will do that in a day (normally)
rancid frost
It's not hard at all, especially if you can get multiple people working at it.
rancid flume
even myself it should take about 10 days
fierce steppe
Top 5000 teams requires 4.5M
rancid frost
I'm looking at about 200k points some time in the next 2 hours.
rancid flume
200k points per 2 hours 
rancid frost
And that's only going by current estimates with no CPU workload.
rancid flume
add cpu workload it will become 200.1k/2hours
rancid frost
This is the kind of work the 1080Ti was born to do.
forest sapphire
CPU is folding every 13 seconds lol
rancid frost
And I've got two of them.
forest sapphire
@rancid frost my 2080ti lives for this
fierce steppe
You have two laptops? all I have is a smart watch and a calculator
rancid frost
Alas, that thing wasn't around in 2018 when I built the Planet Smasher.
Otherwise I might have sprung for one of those while I was stuck working 80+ hours a week.
rancid flume
@fierce steppe plus a f**ked up machine that can fold gigantic proteans
rancid frost
The Planet Smasher is revenge, revenge against the world, yet here I am helping it out.
forest sapphire
haha
rancid frost
I was supposed to have a VR setup hooked up to it, but I've been having trouble acquiring a headset.
Spare funds haven't been lining up.
...that, and I'm not very fond of giving Facebook money.
slow socket
if you use two machines, do they need to have 2 seperate accounts?
rancid frost
Nope.
rich depot
nope
fierce steppe
No. Use the same account. Same username, team ID#, and passkey
rancid flume
really? i made 2 usernames lol
rancid frost
I'm using two machines right now under the same passkey and everything.
rancid flume
pc1 & pc2 lmao
forest sapphire
Yeah you can use the same user info across many platforms
Larry has like 15 VM's using his username lol
he is CRANKING out some points
rancid flume
should i rent VMs for this?
my folding viewer is stuck at connecting, how do i fix?
rancid flume
the 3d model viewer
rancid flume
and yeah, the web viewer is also broken on chrome
fierce steppe
viewer doesnt work on windows
rancid flume
ah i see thats fine then
fierce steppe
Thats why it was able to work on your mac laptop
spark veldt
Why cant i get WS assignments?
fierce steppe
too many people not enough work units
rancid flume
i was hoping to get a screencap of some epic molecule cloud to put into my tutorial guide
forest sapphire
might be able to find it on googles
rancid flume
i don't take others' images lol
spark veldt
well im currently streaming my Viewer going to leave it over night @rancid flume Im also recording so if i get any ill sent them your way
rich depot
the ONLY web browser i have gotten everything web based to work with is edge, thats it, everything els might work for a little but not later on
forest sapphire
@rancid flume Its not taking if you request permission
rancid flume
nvm its demo
forest sapphire
@rich depot use incognito mode for chrome
rancid flume
incognito is only for ponr
spark veldt
should my work server for CPU be 0.0.0.0?
rancid flume
is project 11760 also covid?
fierce steppe
yes
forest sapphire
yep
spark veldt
yea
fierce steppe
11741 - 11781 for gpu are covid-19
forest sapphire
hey @visual lily
visual lily
The Current Folding@home project IDs that correspond with Coronavirus (COVID-19) research are 11741, 11742, 11743, 11744, 11745, 11746, 11747, 11748, 11749, 11750, 11751, 11752, 11759, 11760, 11761, 11762, 11763, 11764, 11776, 14328, 14329, 14530, 14531, and 14532.
fierce steppe
thats the old list @spark veldt they've added more...
rancid flume
i set it on auto i think they'll prioritze covid projects for now
spark veldt
More!
spark veldt
Nice
fierce steppe
CPU : 13862 - 13863 - 14328 - 14329 - 14337 - 14528 to 14531 - 14572 - 14574 - 14576 - 14600
GPU : 11741 to 11781
rancid flume
i don't have to manually set them right?
spark veldt
if we did where would we do that?
visual lily
You can't manually set it to covid
rancid flume
aha ok nothing to worry about then
visual lily
But if you choose research type as any disease, chances are you'll get covid
fierce steppe
Do you have a work unit?
visual lily
^
spark veldt
"15:15:22:ERROR:Receive error: 10053: An established connection was aborted by the software in your host machine."
visual lily
Oh
visual lily
Nah you haven't got a wu then
fierce steppe
"15:15:22:ERROR:Receive error: 10053: An established connection was aborted by the software in your host machine."
@spark veldt You have the viewer open, don't you?
burnt orbit
Im still getting the WU thing, should I just wait?
spark veldt
yep
fierce steppe
Viewer doesn't work on windows, it will be stuck on the demo loop
That's what is causing that 10053 error
Close the viewer
spark veldt
ah
visual lily
Wish the viewer did work on windows
fierce steppe
There's a way to get it working
spark veldt
linux vertual machine i assume
fierce steppe
nah
rich depot
o.O
spark veldt
no?
fierce steppe
Well, I mean that would probably work... But it'd be stupid
dreamy hazel
how do i see whether or not i'm getting qrb?
spark veldt
Still getting same error
fierce steppe
after closing the viewer?
spark veldt
Yep
rancid flume
can someone with a working 3d viewer send me a screenshot of their craziest fold?
spark veldt
Fixed
rancid flume
i will be using it for a website announcement
fierce steppe
how big do you want it to be?
dreamy hazel
there's a 3d viewer?
spark veldt
i wonder if i can fix the viewer
rancid flume
as large as possible
dreamy hazel
or is it this one
rancid flume
yeah this one
forest sapphire
Thats so cool
rancid flume
if only you actually understand what on earth that bubblar monstrosity is
rich depot
That is a protein
dreamy hazel
chain, isn't it
rich depot
A chain, folded one, or at least in folding
spark veldt
cluster
rancid flume
all i know is ATP = power
fierce steppe
hows that
rich depot
Also protein
spark veldt
Spotty how are you viewing these?
rich depot
looks more completed fold tho
rancid flume
thanks i'll just use this one
fierce steppe
my viewer is not broken
rancid flume
looks crazy
dreamy hazel
spotty has a slightly more advanced computer i suppose lul
rich depot
lul
fierce steppe
I'm just using a fixed version of the viewer
spark veldt
Howd you find that?
fierce steppe
someone posted a link to it on the forums
spark veldt
Aight
pale solar
how do you work on the covid cause? only ones i can see are alzeimers cancer huntingtons and parkinsons
rancid flume
set it on all diseases
hallow tiger
Covid is priority on "select all"
fierce steppe
For anyone who wants to fix the viewer on windows
pale solar
ok thanks
fierce steppe
its a github file of someone who fixed the viewer and uploaded it
So install at your own risk
rancid flume
i really hope they aren't just mining ethereum and using the profit to get medical firms to work on cures
dreamy hazel
this is a gpu fold, the other fold i posted was on cpu
fierce steppe
To install extract the files (7zip/winzip) and move the fahviewer and freetype.dll files in to the program files\fahclient folder and replace the existing files
rancid flume
yeah ok all gpu folds look crazy
fierce steppe
It can be a little bit janky and it can causing folding at home to crash
but then you just launch it by clicking the Viewer button in the advanced client
dreamy hazel
tbh the cpu one's not exactly terrible either
pale solar
are peoples viewers not working? i just opened mine up and seems fine as far as i can tell. though i only just started
fierce steppe
works in linux and mac, windows version busted
dreamy hazel
^
pale solar
im on windows
spark veldt
I still cant find the github
fierce steppe
Does it say Demo down the bottom left hand corner?
on windows it just gets stuck on the demo loop
pale solar
yes it does didnt notice that
spark veldt
found it
spark veldt
tap windows f and type github
fierce steppe
there are posts saying that the cube protein structures are a bug
seems likely since they do not look normal
viewer doesn't like the core22 units
I'll have to test it if I get an older core21
rancid flume
so we are wasting computation on cubes?
rich depot
^
rancid flume
oh ok
hallow tiger
Whoa .... the proper protein viewer os mental..... it's like it's breathing ๐ฎ
spark veldt
aight i got a working view stream now
fierce steppe
If anyone is on Linux running a GPU with Core22 they could post what they get in the 3D viewer
slow socket
and on wich linux kernels does the folding software run?
spark veldt
rancid flume
@spark veldt would you mind joining my team? you seem to be on default
fierce steppe
spark veldt
what number?
fierce steppe
223518
spark veldt
done
hallow tiger
223518 is the LTT code
forest sapphire
yep
spark veldt
need to get my self some water cooling
forest sapphire
I've done 16 folds.
spark veldt
running at 91 degrees
slow socket
does kali count as debian os?
hallow tiger
woop - 2nd PC incoooomiiing
forest sapphire
My GPU at load right now is 64 degrees
hallow tiger
Just intome for my gaming PC to finish it's current one
slow socket
mine 67 degrees
forest sapphire
@slow socket what GPU are you running?
dreamy hazel
gpu 75, cpu 82, over several hours though so appears stable enough for me
pale solar
do your cpu and gpu work together or do they get seperate workloads?
dreamy hazel
separate workloads
spark veldt
seperate
jovial hull
503 errors on fah lb?
pale solar
ok cool. just wondering since i loaded my cpu protein easy enough but went to view my gpu protein and the viewer is stuck on loading. progress is going up so i know its not frozen. probably just a bigger protein or something.
dreamy hazel
way bigger
spark veldt
yea
hallow tiger
@slow socket Still will outperform CPU for folding
forest sapphire
anybdoy else watch the next attempt and get sad when it resets. I feel like my computer failed . ๐
slow socket
yeah
rich depot
oh btw there are some codes like 13850 is also covid, but unknown details
forest sapphire
yep I saw that one yesterday I think Walky
pale solar
honestly wasnt sure which would run bigger. since im running a ryzen hexacore. 12 thread. wasnt sure how big, if any, effect it would have. looking like cpu almost aint worth much at this compared to gpu
rancid flume
im on 13850 for my mac
dreamy hazel
well, 12 core 24 thread ryzen here lul
rich depot
crai in half of it
forest sapphire
yeah @dreamy hazel 3900x for the win!
wind osprey
This is the longest my laptop has been use din 4 years.
marble frigate
hmm i dont seem to have anything filled on the viewer. is this something bad?
rich depot
it's the demo model, not your one
spark veldt
if a cpu protein kills virus cells its better because then it doesn't cost as much to mass produce (right?)
pale solar
smokey thats the demo unit
wind osprey
viewer is broken for this version, previous version it works
marble frigate
ah aight
rancid flume
I'll ask my uni for permission to our NVIDIA Turing farm and see how many numbers i can crank out
spark veldt
do it
rich depot
yes
spark veldt
i could install this on all my school pcs and
forest sapphire
OMG yeah @rancid flume
rancid flume
will probably have to do it 2 weeks later tough due to the approval process
mild kiln
Much better temps at base speed
rich depot
That's a lot of computer
dreamy hazel
you get a beginner grade load at first, and if the system notices you doing those folds really quick (in my case 20-30 minutes) it'll also assign bigger cpu folds to you, this one rn takes roughly 4hrs
pale solar
follow the git posted above and it fixes it. works well it seems aside from my gpu protieb still loading. any idea how long that usually takes on a 1060 6gb?
spark veldt
my set up
rancid flume
i have a 1070 8gb and its taking about 3 hours for my current fold
rich depot
That's quite cool, mine is 85C
spark veldt
got rtx 2060 2 26 for me
pale solar
i mean to load the viewer. or is that what you mean too?
slow socket
what kind of internet usage does the program use?
rich depot
viewer is bugging right now
dreamy hazel
i'm running a 1060 6gb too
rancid flume
@spark veldt add backgorund music to your stream or people wont stay
mild kiln
they gave me a 6 hour fold for my Q6600
spark veldt
aight
dreamy hazel
try restarting it khali
marble frigate
wow. my cpu after cleaning, re-therming, and also only on medium folding power
mild kiln
2 hr 50 mins left for my Q6600
rich depot
tfw my CPU folds in 2 hours and 30-ish mins
mild kiln
Are you at Turbo Johnny?
forest sapphire
That is super warm smokey
mild kiln
My 9900K is at 60 C cause I disabled Turbo Boost which for some reason disables MCE too
marble frigate
its up on 76C when i set it to low folding...
green monolith
47 threads makes my server toasty
spark veldt
im tempted to down clock 8 of my cores to 3ghz (normally 4) and run it on that to keep the temps down
forest sapphire
haha @green monolith
green monolith
CPU 1 is at 79ยฐC
mild kiln
hottest core is 66 C
dreamy hazel
ryzen 3rd gen actually keeps cozy 82ยฐC max so far
rich depot
crai in 85C
mild kiln
MSI motherboards are weird in terms of MCE
dreamy hazel
running 4ghz on all threads
spark veldt
ryzne 5 3600?
forest sapphire
@dreamy hazel you have a 3900x correct? What are you using for cooling on that?
marble frigate
idk i cleaned and stuff last night to fix the temp, but seems like this "ENERMAX ETS-T50 AXE " i have from few years back is meh..
dreamy hazel
nah, 3900X
rich depot
5 3600 is mine
spark veldt
ah ye
dreamy hazel
BeQuiet Dark Rock Pro 4, 250w TDP
spark veldt
Yea same
forest sapphire
ahh okay
spark veldt
temped to get an AIO
rich depot
crai in Stealth cooler
green monolith
ouch
mild kiln
I need to find a beefy air cooler or 240 Rad so I can work at turbo speeds
rich depot
all cores in 3.8GHz, 85C
forest sapphire
@dreamy hazel Mine stays at about 76 degrees
mild kiln
3.6 9900K High 60s
forest sapphire
@dreamy hazel I am using AIO though
spark veldt
what AIO?
fierce steppe
CPU work assignment has jumped about 30k in the last hour or so. Are people finding it easier to get CPU work units now?
(CPU is the 63k one)
hallow tiger
gah ... back-to-back run has ended. Give .. me .. moar....
rich depot
100% my wu are CPU
forest sapphire
@spark veldt Corsair h115i
mild kiln
Weird. MY 9900K is sitting at 50% only
dreamy hazel
hwInfo64
simple swan
mine all setup for tonight get some WU's in while in sleep
rich depot
^
dreamy hazel
taskmanager is incapable of that computation
rich depot
how to set up GPU for wu??
fierce steppe
whats your GPU?
spark veldt
Im just running gpu my cpu gets way to hot
rich depot
1660
fierce steppe
it wasn't already added?
Does it show up in the advanced control?
rich depot
hallow tiger
Woop - 2 minutes wait between WU and I'm off again ๐
rich depot
gpu is 30C right now, no task for gpu
hallow tiger
It must like my 1080Ti
simple swan
right click on gpu and set idle off if you want it go now but other wise leave it and it will run
pale solar
finally got my gpu fold loaded
rich depot
ze revenge of ze default cube
spark veldt
dreamy hazel
damn lol, chipset is at 75C
rich depot
what does "waiting for idle" means ? :ยง
spark veldt
its waiting for it to go into sleep mode
mild kiln
OK I got HWInfo64 now
forest sapphire
14328 Covid-19 project
pale solar
means its waiting for you to socially isolate from your PC
dreamy hazel
it seems you have it set to only do stuff when you're in idle
rich depot
niceeeeee
fierce steppe
Guys make sure you don't leave the Viewer running as it eats a significant chunk of GPU resources
dreamy hazel
you have this ticked?
rich depot
@spark veldt my gpu is in sleep mode o.O
eh, sleep mode in my PC is a bit tricky when the PSU is down as well
spark veldt
Yea
hallow tiger
@fierce steppe Should be 3d not cuda for the view/model?
mild kiln
So where do I see the Utilization in HWInfo?
mild kiln
Also HWMonitor shows me also the CPU is at 50% utilization only
dreamy hazel
is the load setting to full?
mild kiln
yes
spark veldt
"available for this configuration
15:57:30:WU00:FS00:Connecting to 18.218.241.186:80
15:57:31:WARNING:WU00:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration"
this just means there is no WU right?
mild kiln
rich depot
ah yeah mine is 50% average
fierce steppe
yeah, no WU
dreamy hazel
yes rai
pale solar
first CPU fold
rich depot
@spark veldt yup, no wu
rich depot
Eyyyy that's a cute one
dreamy hazel
enjoy
rich depot
gtg a bit, allergy to pollen is horrib
forest sapphire
love watching my 2080ti push out some serious work
red igloo
heyo, I just starting folding on two of my machines at home. I've had my Dual Xeon X5650's running all day, and now i
forest sapphire
ahh hell, I just love seeing my whole system do work
rancid frost
CPU is working on a cool project.
main ether
How long should it take to get the passkey?
icy mango
2-3 minutes at max
forest sapphire
@main ether 12-24 hours
rancid frost
Synthesis between 2003 SARS and COVID-19.
pale solar
right away. check your spam
red igloo
i've got my R5 3600 + 1080ti gaming rig going. my cpu is up and folding but i've got a lot of 16:02:23:ERROR:Receive error: 10053: An established connection was aborted by the software in your host machine. in the logs
icy mango
Oh, I received a passkey really quick.
red igloo
from what I understand windows doesn't display the visualizer at all?
icy mango
@red igloo that's fairly common
west sphinx
@main ether For me it took today 2hrs
icy mango
And, that's a bug
if you want to see the visualization, you need to download the older version of the viewer.
main ether
@west sphinx thank you
icy mango
you can find the binary there
mild kiln
Yeah my CPU while folding is locked to 51%
red igloo
@icy mango ah, good. I checked my score. It seems my dual xeons have been working all day
icy mango
use 7zip to extract the old version and put it in the folder where the FAHViewer is
red igloo
thank you
icy mango
make sure to rename it to something else so you don't replace it with the current version
rancid frost
My basement trick appears to be working despite what people said years ago.
Sucking air through the bottom is making a difference.
marble frigate
is there any way i can screw up a tower cooler install in a way that its fine up to 70% cpu util and then can't handle the rest?
icy mango
there's also a dependent file you also need to copy over to that directory, freetype6.dll
fierce steppe
using the viewer from 7.4.4 can make it crash btw
cedar adder
@marble frigate what is your setup?
icy mango
I've not experienced that @fierce steppe
fierce steppe
I have
fierce steppe
driver crash
marble frigate
i have a 4790k cooled by a ENERMAX ETS-T50 AXE for 3 years. i'm (edit: NOT) doing demanding things with it so dont generally have an issue. unless i start to fold and goes up to 100c
icy mango
Ah, interesting.
hallow tiger
Damng .. my model looks like a Purple Borg trying to assimilate a big cheeto ๐
icy mango
Yeah, the model is insane.
marble frigate
also cleared and re-thermod last night but didnt do the trick
hallow tiger
@marble frigate underclock it for folding only?
marble frigate
idk im just wondering if it's something i can do to improve it or its simply a crappy cooler whihc is fine for my crappy games but not for real utilization
hallow tiger
LOL
cedar adder
@marble frigate did you put on liquid metal?
pale solar
what temps shoudl you start worrying about? ive never really hit anything high so its never been an issue for me. currently on half power on CPU got 61C (which im sure is fine) and GPU i have 73C which is proabbly getting u there a little
rancid frost
Don't start worrying until about 78ยฐ.
hallow tiger
Manufacturer will state what the thermal limits are
marble frigate
@cedar adder ?
cedar adder
@marble frigate your thermal compound between the IHS and your cooler?
rancid frost
You'll get more performance the cooler the temps are with nVidia, but clock speed isn't as important as CUDA count.
marble frigate
ah ofc
cedar adder
Did you use liquid metal?
hallow tiger
It's conductive, so less safe in builds where the CPU is vertical
marble frigate
ah mine is definitely vertical
rancid frost
That's why I don't use it.
real oxide
Hi everyone, I've been waiting 2 days for a WU now, is that normal? I've installed Folding@home 3 days ago and I've only been appointed 1 WU
marble frigate
I've just started to worry about my cpu's well being in general cause of heat
real oxide
๐ฆ
cedar adder
you can't use liquid metal on a lot of coolers it is corrosive to copper
rancid frost
@real oxide Normal at current.
dreamy hazel
hwinfo keeps closing lol
rancid frost
Lots of server load.
hallow tiger
@real oxide If the wait is>20 mins then pause and restart it. May take up to 20 attempts, but you should get one
fierce steppe
@real oxide If the wait is>2 mins then pause and restart it. May take up to 20 attempts, but you should get one
@hallow tiger No!!!
Don't do it every god damn 2 minutes
If there wasn't a work unit 2 minutes ago there isn't going to be one now...
You're just going to end up DDoSing the servers telling people to do that
You should only do it if the wait time is unreasonable long, as in > 1 hour
rancid frost
I'd honestly just let it roll at this point.
marble frigate
hmm. im actually wondering if i put the fan on the other side of the cooler tower would make a difference. im not a pro at this at all ๐
rancid frost
The thing actually queries the servers for WUs every few minutes.
forest sapphire
Yeah I do that if the wait time is like 30+ mins
rancid frost
You'll get one eventually, they just gotta come as they come.
pale solar
positive pressure is the biggest thing in my builds. at least one more fan in than out
red igloo
nice! got the vizualiser working! Thanks @icy mango
hallow tiger
@fierce steppe I keep forgetting. If I see it and it's 10+ mins then I'll reset it
marble frigate
I've got one fan front, one on the back and that's that apart from cpu cooler ofc. everything is closed here for a while so no chance of getting more fans
fierce steppe
"Please only do this if you are stuck waiting a long time for a download and the Next Attempt is too long. Spamming it won't help you get a work unit faster, it just resets the time window between checks so it will only help those who have been stuck for a long time.
Remember; this won't make more Work Units available. There are still ongoing issues with F@H pushing out enough WUs to meet the high demand. It will only help if your client has stopped checking for new work units due to too many failed attempts. "
rancid flume
omg mine is at 69.69% haha so funny
dreamy hazel
i have 2 fans in in the front, 1 out in the back; and the little plastic toy ontop of my case with ventilation grid up top is slowly melting