#folding-and-boinc
1 messages ยท Page 33 of 1
that is a graph of the 32 cpu's on the host
running 12 quad core hosts
she's fuckin pinned
i'm basically turning my vsphere into a modern art project in support of fah
lol
How many WUs have you guys completed?
i haven't managed to get a WU today
I was asking in total
Is there a way to tell it to use only 50% of CPU or something? My laptop is going to melt
Oh cool
Is there a way to tell it to use only 50% of CPU or something? My laptop is going to melt
Set the folding power to low
That disables my gpu
medium?
Pinned at 100
disable ur gpu slot
Well, I want my gpu
or set it to not -1
start with a resonable amount
another gpu wu down
still waiting on send
I want my gpu to be 80% at and CPU at 50%
Is there a way to set that? Or is it just that slider
you have to set that in slots
figure out how many is 50% of your gpu take off 10% and set that there
or whatever you want
but
cpu and gpu WU's are not the same
Is it physical or hyperthreaded as well?
debian is absolutely KILLING it for wu's tonight
if I could export this image and share it I would
every one I light up gets a WU
sick
New numbers
Here I'm still waiting for a wu
LMG was gonna set up a work server, right? Any updates on that?
Considering that they are trying to get hardware donations... I would bet a few weeks until they have stuff
13850 x3 , 14332, 13870, 13840, 13851 x2 , 13860, 13870 x2, 14304, 14335 all being folded here
hopefully my data sends
still waiting on the gpu send
rip
I got 5 PC's running full tilt, seems like they got more WU out
yea i'm spinning up 10 more nodes rn
13850 x3 , 14332, 13870, 13840, 13851 x2 , 13860, 13870 x2, 14304, 14335 all being folded here
@storm talon None of those have any known issues [that I'm aware of]
Has that been stuck on send for a few days?
Oh well then that should be fine
Looking for help. Downloaded the folding client. The web page only shows my GPU working. Has my CPU at 0. Is this normal?
and rising
It most likely hasn't received a CPU work unit yet.
Common problem, not enough CPU WUs to go around
Just wait and it will start up when it gets one
I have a dozen vm's running cpu and a few running gpu. work is coming in peicemeal, i am grabbing as much as i can. If I scale more it'll just deprive solo folders of their wu's
@storm talon
yea i'm spinning up 10 more nodes rn
@storm talon
๐
lol
not judging, just funny
I have no CPU unit RN
Ok thanks! @fierce steppe
I'm in full support larry
yeah
Imagine using a room heater.
This meme was made by the folding gang.
Means I sleep in 70F instead of 100F
243M points for LTT at the latest update. Insane!
weirdly enough it's the other way round for me, i have a cpu but no gpu WU
I have nothing
I just started after watching linus's video today
@rich depot what's your folding name
Hell yeah, welcome
I'll give you 2 vms
you'd also need his passkey
running on a mere r9 3900x, but i guess every bit helps eh
/cries in i7 6700K
so if you fold without the passkey that doesn't count?
What GPU are you using @dreamy hazel ?
It counts, but it isn't eligible for bonus credit
GTX 1060 6g
@storm talon I don't care about points ๐ I'm not even in the ltt team (I'm in the nilered team)
Nice! GTX 1060s are pretty power efficient cards for folding
having both up while working homeoffice, don't need my pc for that
I did not turn on my desktop before I went to work
nile red is a good guy to be folding for as well
he ain't gonna beat ltt tho if I can help it ๐
At least you didn't walk up to your computer that was running and folding and smack the power button
I did that to mine this morning out of habit
lol
mine's telling me pretty clearly that it runs
i mean, RGB acceleration is standard nowadays isn't it
gnight larry
happy folding
@storm talon nilered is in a challenge with explosions and fire and styro . nilered is currently second as a team at like 10m, styro is at like 35 or something.
yeah I am
the discord server for supporters of the channel is doing the challenge
nice
no one is losing when we're all contributing to virus research
that is def true
Guys I get this weird unable to rename log.txt error when trying to start the client
thats why I also don't care if I can't get wu's, cause it means we as community can't do more than we can at that moment. its a good problem
Yea, watch ur temps
yeah
aircooled
I had to turn of a few cores in my advanced settings to keep nicely at 75c
yeah
if you start going above 90 then u got issues
i'll have an eye on it, and if it gets closer to 90 i might throttle
ye
been at 80 for a bit now tho
My Patreon: https://www.patreon.com/buildzoid
Teespring: https://teespring.com/stores/actually-hardcore-overclocking
The Twitch:https://www.twitch.tv/buildzoid
The Facebook: https://www.facebook.com/actuallyhardcoreoverclocking
#Overclocking #Degradation
i had to disable cpu on my localhost apart from 2 cores
my cooling is shit
i know what i need to upgrade next tho lol
dat cooler
got a dark rock pro 4, i've actually never seen anything past 65 before
I upgraded my case, my temps dropped 10 degrees in idle, 5 in max temps
I play rust on max graphics my cpu/gpu are used to running hot
i play and stream VR, cpu-encoded, 1080p60
it would seem so
i'm new and got one immediately
it also would appear as if my cpu is throttling a tiny bit, went from 4,05 to 3,98ghz avg all core
ive got a queston, why is my cpu working for hours but my graphics card is on "ready"
perhaps to stay at slightly above 80, but not higher
probably no gpu shares then
what's the points per day mean? the points I accumulate if i made my pc run 24hrs?
yeah, probably waiting for a WU to be received
yep
thats exactly how it looks on my pc
yea i limited my cpu to 1 core cause i'm gaming
yeah, probably waiting for a WU to be received
@dreamy hazel
i see
hey everyone, new to the LTT discord but ive been on the forums for a long time
got a quick question, any chance there is a way to switch work units from a cpu to gpu?
i keep managing to get WUs for my cpu but not for my gpu, but obviously a 2070 super is going to get more points than a cpu, even a 16 thread one
i think the workunits for cpus vary from gpu WUs
@gritty shale they have different WU for CPU's and GPU's, you just need to wait for a WU for your GPU
i figured but it was work a shot
gpus can't handle many things a cpu can handle
it's just too specialized to do a few little things, but those really well
ive not got a WU for my gpu in a while but i keep managing to get WUs for my cpu
Anyone figured "best" configuration for WU assignment when you have lots of Cores?
i have a rather unique problem too, my stupid UPS cant handle the current my computer pulls lol
so i have to just use 8 of 16 threads lol
It would be nice if F@H provided stats for servers for available units pending.
What does WU mean?
LTT is now the highest performing team in the world!
To take advantage of your turbo boost speeds you can limit the threads used
but there is reasons why we use gpus and cpus apart from each other, that's what I meant to say. The things a gpu is meant to do it really excels at, and a cpu using only software to do the same things is incredibly slow in comparison
but vice versa, a gpu might not be the first choice in handling things a cpu is meant to do, even if technically it would be possible to make it do that
@meager hound personally I trust the AMD engineers and not myself ๐
question is, what's better for the speed, 12 true cores @4,4ghz or 24 threads @4,0ghz? does it matter?
ik
@dreamy hazel This usually is a question for the developers of the program, i.e. F@H devs.
fairs, just thought there might be someone here with that knowledge
My AMD Vega 64 is waiting for like 12 hours now... is this normal?
Optimizations in that factor can be done programmatically but they are hard so usually devs just do the easy bits to make sure they are covering a high % of the hardware
my guess is that 24 would be better, it doesnt seem to push each thread super hard which would make me think its not so difficult of a calculation that it needs the full performance of a core, and virtual cores are good enough
but thats purely conjecture
This low mid high thing is not working, my computer is over heating with any of the settings
@dusk ruin change the number of working threads for your cpu
if cpu is whats overheating
if its gpu im not sure
sorry, the number of threads used
not work units
Is is a gaming laptop
my bad, im kind of brain fried
xD
1 thread off CPU is still 50% ish according to task manager
so my cpu has just finished a WU within 30 minutes
maybe just run gpu alone and no cpu? or vice versa?
gpu has 2:30h to go
I wish this thing have proper temperature management so I can comfortable leave this Thi g runnk giver night
What work is this Thig doing on the computer?
This is way hotter than me rendering
Which I do all the time on my laptop
its a totally different kind of problem
I have an i7 7700hq a 1060 max q and an i3 6006u all ready to fold
But I am getting no jobs set
its less intense than some things, like running prime 95 or something, but less than some others
@small current its hard to get WUs right now
there are so many people folding now their servers cant keep up
Ye
Yeah hopefully LTT will make their own server to distribute more work
they have more than 10 times as many people folding over the course of a couple weeks
Yeah but they need to make a video out of it ๐
cpu is idling now, too
so chill ๐
Ooooh the 6006u got a wu
im on attempt 8 to get a WU for my gpu
i cant even get an email for the identity thing
I'm on 13 attempts for the good cpu
(didnt know that increased your point production)
even though ive been folding for years lol
And 13 for the GPU as well
I did not get that email as well
what does it mean when it says downloading?
But I remembered that I had that pass key in my inbox from 2018
It means it's trying to find work for you to do
@dreamy hazel well it's downloading..
does that mean it found a WU though or nah?
@dreamy hazel tail the logs ๐
its trying to find one
So.. There's no % limit on the gpu I assume?
Can't say I want the gpu to run at half tilt
Cause hitting proc 100 is no good
@dusk ruin you can underclock it
Well...
but yeah would be nice as mine also
hits 100% and chokes my firefox / desktop
starting tomorrow ill be setting up a dedicated folding machine, im pretty happy about that. just a 3.5 ghz 4 core and a 1070 but its osmething
Also always leave a core to feed the GPU
heres a question
i show 3 things, even though my gpu hasnt done anything
the gpu is currently working on the download
my points per day with the gpu alone are on 450k, with cpu it's 750k
but that send keeps showing up although the gpu hasnt run
where did the "send" one come from?
If it shows Download it means it's actually downloading a WU.
Check the logs tab and it should show the download progress. It might also be timing out if the servers are struggling
@dreamy hazel depends on the project
and does that indicate an error
yea the download i know is normal
its the send thing im confused about
Different projects wield different PPDs
woop woop, cpu got a new WU
becaues it didnt work on anything, whats it sending??
Check the logs for why its failing to send.
Restarting your client might get it to try sending it again
ETA on CPU WU is 21 minutes
The excitement of getting your PC to work hard... Endless days of staring at a screen program to small excitments.. this is what life became..
lolwut
when your pc is so shit that it doesn't even get a workload assigned ๐
especially when you help the bad virus which made italy lock theirselves down died
that's actually not your pc's fault glad
tru
becaues it didnt work on anything, whats it sending??
@gritty shale 11758 has had known issues with failing to upload... When did you do that work unit?
Possible failure to upload completed WUs 11753 & 11758 to work servers 155.247.164.213 & 155.247.164.214.
their servers are so overloaded with the masses of folders that started recently, they're too slow in distributing work units (WUs) to the folders at home
@twin juniper
just wait, you'll get some eventually
their servers are so overloaded with the masses of folders that started recently, they're too slow in distributing work units (WUs) to the folders at home
@dreamy hazel yeah it takes me 30 attempts to be assigned a new wu
oh wow lol
@fierce steppe i dont think i ever did that WU. I had a work unit yesterday, that sent normally. then as ive been waiting today all of the sudden that send unit showed up
i think its an error
Restart the client and see if it goes away
i just did but its still there...
you exited fahclient.exe?
yea
To be honest F@H team has lots of work to do. First get the work from the scientists, then attach it to their model, then slice and dice it to Work Units then upload it to servers to become available. On top of that maintain the infrastructure to make this all possible (and guard against security issues as we all know how dangerous Internet is) and try to extend it at the same time with the demand increasing by more than 1000%
@gritty shale if your GPU is currently waiting on a work unit you can delete the GPU slot and then re-add it. That will dump the sending work unit
DONT DO IT if it's currently working on a GPU work unit as it will dump that too
its not, its just waiting. im trying that now
that send unit is there even with the gpu deleted
weird
on the other hand, isn't it a good thing that we're helping them so much that the bottleneck isn't the computing of stuff, but the distribution of stuff to compute?
definitely
Yes, and no ๐
Because now F@H resources are dealing with expanding the infrastructure instead of other stuff
The best would be to be done gradually
true
But it's not really how internet works with all the hype!
true, but that's temporary, too
Temporary boost but there will definitely be people who start folding now for the first time who stick around for the long haul
๐
LTT has a pretty good retention rate for folders, especially with members of the forum and discord
Yes and lots who will leave in 1 week/ month
probably just until they get the next electricity bill
and then they will have to scale down the infrastructure, i.e. more work ๐
hopefuilly some people stick around, but im sure a lot of people wont
but i hope that if they do expand, it will help them in the future anyway
Haven't really been keeping with chat. Do we know anything more about the collaboration between ltt and stanford for server/bandwidth capacity?
Nope
Yeah, lots either leave or scale back... But we always end up with more members than we had before. This can be shown in the monthly graph where you can see the peaks for F@H events we've had in the past where even after the event has ended we've still maintained an increased production...
I think you will find out about it on their videos.
I wonder if the spikes are when Jake turned on the 1PC6Editors ๐
i doubt it
6 editors 1 PC is a drop in the bucket compared to what the team can do as a whole
yep
It appears the Team can do feck all if the servers don't start handling the team ๐
If I had to take a guess 1PC 6 Editors would be about 13-14 Million PPD
assuming everything is working 100%
umm i dont know about that unfortunately 450k without the bonus is pretty insane
@hushed bobcat I think they said it on the video, no?
LTT Team has had such a sharp rise in production that I can't even overlay the production graphs any more cause we're on a completely different scale ๐
did they? i dont remember
so i have only had WS come in and my CPU only, It was 1 hour for 10k i have not managed to work anything on my GPU yet ๐ญ
never managed to download more than 1 "job"
Does anyone know when the LTT F@H server goes live?
@last imp when they make a video ๐
I am having no problems my side with sending data to there sever but I am not running at full only medium.
my cpu keeps itself at 82ยฐC
my i3 keeps it @ 68C peak
4ghz on 24threads is an okay throttle if you ask me
also only aircooled
second CPU WU done :3
I have about 40 mins to go on my first one
@meager hound 14 hrs on my 2nd one
That's about as close as I can get it to match up
Well if any a spear power supply and hard drive and thermal pads I can get a second system up lol
wonder why my cpu keeps getting 20-30min workloads
while others apparently get huge ones, i mean, 14 hrs?
Might be all that is available, though it used to be that after you finished a few basic projects if you did it quick enough you could receive bigger ones.
Not every system can process them fast enough to meet the deadline so they only sent them out to systems that could return units quickly
I'm not sure if they're still doing that at the moment though
Is a 660 ti good for folding?
definitely worth a shot, even if it's a bit older it adds up quickly
Ok, ill soon have it online
So I was folding
don't break your pc, insult
mine is pretty quiet, but i guess that's obvious for a dampened case
Lol, cat is probably loving the nice warm box in your room
Ye
09:29:33:WU00:FS01:0x22:Project: 11764 (Run 0, Clone 7478, Gen 8)
09:29:33:WU00:FS01:0x22:Unit: 0x0000000d80fccb0a5e7112f5580c33cd
09:29:33:WU00:FS01:0x22:Reading tar file core.xml
09:29:33:WU00:FS01:0x22:Reading tar file integrator.xml
09:29:33:WU00:FS01:0x22:Reading tar file state.xml
09:29:34:WU01:FS00:0xa7:Completed 85000 out of 500000 steps (17%)
09:29:35:WU00:FS01:0x22:Reading tar file system.xml
09:29:36:WU00:FS01:0x22:Digital signatures verified
09:29:36:WU00:FS01:0x22:Foldingahome GPU Core22 Foldingahome Core
09:29:36:WU00:FS01:0x22:Version 0.0.2
09:29:36:WU00:FS01:0x22:ERROR:126: Bad platformId size.
09:29:36:WU00:FS01:0x22:Saving result file ..\logfile_01.txt
09:29:36:WU00:FS01:0x22:Saving result file science.log
09:29:36:WU00:FS01:0x22:Foldingahome Core Shutdown: BAD_WORK_UNIT
09:29:36:WARNING:WU00:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
09:29:36:WU00:FS01:Sending unit results: id:00 state:SEND error:FAULTY project:11764 run:0 clone:7478 gen:8 core:0x22 unit:0x0000000d80fccb0a5e7112f5580c33cd
any ideas why?
You overclocked?
But she also typed giberish on my schoolwork
All my fans are be quiets. Pure wings and silent wings
Used silent wings 3 high RPM fans to replace the corsair ones on the AIO. Much more quiet (though don't move as much air)
a lil bit of context that i think might help
F@H recognize that there are a nvidia 820m on this machine, but on device manager it doesnt appear
got a Fractal Design Define S2 with 3 stock coolers; 2 in, 1 out
@rotund flume did it fail immediately as it tried to start the work unit, or part way through like at 40%?
@rotund flume did it fail immediately as it tried to start the work unit, or part way through like at 40%?
@fierce steppe immediately
Where do we check the LTT stats?
Reboot and Reinstall display drivers if it immediately failed
Where do we check the LTT stats?
@glad flicker https://folding.extremeoverclocking.com/team_summary.php?s=&t=223518
F@H stats team summary for LinusTechTips_Team. Help Folding@Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
Thanks @fierce steppe
I'm going to chuck on some tunes and go through the badge requests in a minute... If you qualify for a badge then put your request on the forum now with your extremeoverclocking stats link
https://linustechtips.com/main/topic/1069238-fh-and-boinc-badge-request-thread-last-update-2020-mar-23/
Since the primary two mods responsible for badge assignment duties (Whiskers and myself) havent been around much in recent months, weve had a bit of a chat behind the scenes and thought wed try something new. Instead of you having to try to figure out which mod to write a PM t...
The laptop she sat on was the one that was getting no folding done as it was given no jobs
I have another one that is foldinh
But no
Sit on the one that I am doing my work on
not getting any jobs for cpu
not getting any jobs for cpu
@plain isle Pretty common problem at the moment. So many people folding not enough to go around. Just wait and it will start when it gets allocated a work unit
ye i mean it took about 8 hours to complete one
Depending on the CPU you have that might be what is expected
also appears to have different sizes of WUs available
amd fx 8350 black edt
Yeah, 8 hours would be about right then
cnt buy better atm with this bloody lockdown
most likely when the CPU temps refreshed
the exact frame you took the screenshot lol
my temps hit about 50
i get a send error: faulty on that bogus WU from nowhere that wont send
is there any way to manually remove it?
Deleting the GPU slot didn't remove it?
nope
even though when i add the gpu back, if i click on the gpu it highlights that WU as if it came from the gpu
@meager hound
Sending unit results: id:00 state:SEND error:FAULTY project:11758 run:0 clone:2015 gen:0 core:0x22 unit:0x0000000a9bf7a4d55e6d7714e172830c
@dreamy hazel HWMonitor ๐คข
???
HWinfo64 > HWMonitor
Cant wait to let my Threadripper 3990x fold for the team
I wonder if the spikes are when Jake turned on the 1PC6Editors ๐
@lusty trellis
This is his stat page: https://folding.extremeoverclocking.com/user_summary.php?s=&u=812302
Still having work unit issues themselves probably
F@H stats user summary for LMG_jakkuh. Help Folding@Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
it seems
Ha!
I actually think Jake forgot to put his passkey back in after they made the video ๐ค
I mean, they're still getting points according to the stats page though
so don't think he forget
You still get points, you just don't get the quick return bonus
either he hasn't got the passkey in or he has a bunch of old work units that are timing out/sending as failed
surely he didn't forget.. Surely
so no idea on how to so no idea how to remove a WU manually?
or what a "faulty" error means?
cause he's completing a normal number of work units, like 10-20 per update, he's just getting low points for it
I don't get why the identified users get more points..
There's a way to delete work units, uhh user data > local? > FAH > I think
thats not right ๐ค
just reinstall
ill lose my cpu WU
Yeah let that finish first
by the time CPU finishes maybe it will fix that stuck WU
im just afraid if it could be interfering with my gpu getting a WU
i mean i do have a "download" WU running as well
so hopefully not?
It might be worth a try don't run full try medium settings see if that helps on the sending of data. I am having no problems
i mean currently my cpu is only woirking at 55% even though i have 16 threads working
so there should be no issue with too many resources being used
usually it runs at like 95% but its been at 55% for a while, its weird
lul
Hello!
my pc is the heater
yay i got a unit
my pc would be the heater if i could get a stupid WU
Im having problems when folding, the download is not running
just wait
my GPU is 2% what would I have to do to make it any faster?
my pc fans go nuts when it's using CPU ... i tried all the folding power settings eh
distribution servers are overloaded @sour wyvern
what u guys do
ty @dreamy hazel
fold all day fold all night
my fans are always cranked
@placid furnace youre probably waiting for a WU
the servers are overloaded with requests
im not tho i have one rn
everyone is having trouble getting WUs
bruu
then idk
true
if youve made progress then idk what to do, if you havent made any progress then i would delete the gpu slot and then re add it
you will lose that WU
I feel lucky, i got WU for all CPU's and GPU's in 4 PC's
but at 2% you may be working on that WU for ages
that viewer isnt working
weird flex
currently the laptop is doing great ... i disabled turbo boost and undervolt the cpu to -80
Viewer in FAH client 7.5.1 does not work on Windows.
same
There's a github file that replaces the fahviewer.exe with a working version
That has the link to the github for the fixed viewer for 7.5.1
the antiviruses flag fah as a threat
must be the fact that it uses your pc resources to do something for another computer
Just extract the two files with 7zip and copy them in to the program files\fahclient folder
man, wish i could know this sooner to see what part of the c virus im helping at on my 1st wu
@meager hound ok, thats cool
here i go lads
one step closer to use my gpu power for good cause
the viewer just says "Connection: Trying"
change the theeme to dark
yep lol, and if it worked I wouldn't mind at all
technically folding at home is an antivirus maker atm 
the viewer just says "Connection: Trying"
@dapper hull Did you replace the files with the github one?
Do you have a work unit that is currently folding?
Darklooks best theme
the antiviruses flag fah as a threat
must be the fact that it uses your pc resources to do something for another computer
@rotund flume
probably because the .exe isn't microsoft signed yet
i'm guessing
now my advanced monitor runs in compatibility mode
@dreamy hazel its because fahclient.exe isnt running... If you tried to copy those files over while F@H was running it might have caused it to crash
should have mentioned you should exit F@H before you make changes to its files ๐
i closed it
dont know if im doing the things well
fixed it by forcing an unexpected reboot
in how many hours does XOC update?
i closed it
@dreamy hazel you can restart it by running the hideconsole.exe in program files > fahclient if it happens again
in how many hours does XOC update?
@warm vale every 3 hours
yea but whens the next update?
Update: Current
03.24.20, 3am CDT
Time Now: 5:12 am
Next Run: 47 min
Tells you when the next update is up the top left of the page
ohh ok nice
don't ask me why it looks like a tesseract cause idk
looking nice
Just one thing to keep in mind is the viewer can use a fair bit of GPU resources when it runs, so you might not want to keep it open all the time
it's so pretty though
@sour wyvern looks good. You just haven't received any work unites from the F&H servers. They're generating them as fast as possible
@sleek lily many thanks, its been like this for like 1h
I know, same here all evening
happens
got 2 wu's this morning though
Many hours waiting yepp
;_;
their servers are overloaded, nothing we can do about it
they're working on it
As well as the points not updating properly at all when you do get a workload
is that art or...
Nah, we are just creating our own future destruction in the form of Skynet
Folding proteins takes too long.
Killing all humans will cure diseases.
This is how it starts
๐ฏ
go, corona!
Won't animals still have diseases
Its distributed across hundreds of thousands of PCs... We can't just turn it off
...i just nearly typed that into my conference chat at work
maybe u got a bigger load
protein foldings
well, now im having a different error, 10053, a conection from the software to my computer is been cancelled
i got that a few times aswell, don't worry much about it, there are plenty of servers it can connect to
but your volume isn't :p
well, now im having a different error, 10053, a conection from the software to my computer is been cancelled
@sour wyvern thats just server issue on their end. It should try reconnecting again in a minute
โ๏ธ
Alright boys are we going to beat Default at the next update again (35min time)?
We are beating default last 24hrs
mine runs on ..... zero
and without water cooling
check my pic again
that was the point
didnt notice any difference from GPU oc
memory OC makes a lot of difference
set it to always fold
"Could not get an assignment" ๐ซ
just be patient wiki
both of my systems are doing nothing
my gpu conected!!รง
might as well turn them off and let others do it ... until maybe linus host one of their servers
but CPU is still loading
memory has boost ?
cpu oc is worth it ... gpu im not sure about it
we shall wait for the experts
GPU core clock OC can show improvements, but if you push too hard it will become unstable and crash
Mem OC is pretty much a waste of time for folding
most hardcore folders will power limit their cards and undervolt in order to maximise efficiency
so, i started folding yesterday when i saw the video, and i found that it just wasnt working. everything i was setup properly, (i think), and it was running. this morning i turned on my pc and my cpu started folding, but my gpu (palit 1050) wasnt. now both have again stopped. is this because of something im doing wrong or are their servers overloaded?
sounds like you're fine, just haven;t got work
their servers are overloaded, they just don't have enough to distribute to people
yup that's what i did with the laptop ... undervolted it's cpu and didnt bother to fold with it's GPU
@serene swallow go to logs
we all get this
Could not get an assignment
In my experience CPU cores/threads trumps clock speed, and again you don't want to push any CPU OC high where it starts crashing or it starts drawing too much power...
But other CPUs may vary
i have an 8600k so thats ok
on both my laptop and ryzen pc ,,, it's using cores not threads .. as in 6 our of 12
For me I would personally try undervolting my CPU as far as I can before worrying about overclocking it
I had to undervolt my cpu to get acceptable temps when the gpus is running
Hi i have the problem, that my GPU (GTX 1070) says Paused: is waiting for idle although i turned On Idle of
unpause it @hazy moss
as for ryzen 3600X running on 4.2ghz at 1.27v
@hazy moss means it works when u leave the pc
didn't bother undervolting my pc, would have to undo it later on; also it runs fine with 4ghz on 24 threads
I normally don't run my CPU (6700k) for folding just because it pales in comparison to my 1080Ti, but I've got a pretty aggressive undervolt atm and keeps temps under 60C with GPU & CPU running
I can pause it then it says Paused:by user but when i press fold it says Pause:is waiting for idle again
Power limiting Nvidia cards works really well
they're already more efficient
I use a few profiles for my card.
For when I'm sleeping I use a profile with 70% power limit, 65C target temp, and I think 60% fan speed
@forest belfry yeah i know it would start when the pc is idle but i want it turned an all the time
PPD estimate drops from 1.5M down to about 1.3M so its not a huge drop in performance considering
remove the check from On Idle
i did
pause then unpause
is it set to full ?
my cpu is alredy running
would like the option to get a little tone whenever something "interesting" happens in the client
Has everyone entered the forums folding event contest?
e.g. a WU being finished or a new one starting
LTT Folding Teams Emergency Response to Covid-19 Starts March, 27th (00:00 GMT) Ends April, 10th (23:59 GMT) Folding@home team LTT id#: 223518 (This event is only for folding for team LTT you will not qualify if you are folding independent or for another team, sorry.) This eve...
well it's supposed to run in background
I!
i got it now. The GPU does not start when i set it to light Folding power
yeah, the optino would be nice
its gonna be hard to hit 500k with the lack of wu's
its gonna be hard to hit 500k with the lack of wu's
@wheat lynx Depending on the situation the requirements may be changed, so don't worry about that
My question how do you get your status up in the proton view ?
Viewer is broken in windows
@knotty pike it takes long time
Oh okay
usually a day
WUs will come, just gotta be patient ^^
Well they crouch the numbers they recon it kill a 1 million people over here C-19
I think reported deaths are currently around 14k worldwide last I heard
but that will obviously increase
i wanted to add something to the conversation but got censored mentioning a place, so nvm
Well you could have 3 units complete that won't upload
LTT HUG OF DEATH ACTIVATED
ive got one running on the i3 6006u but that is very low end and this is an i7 7700hq and 1060 max q
10:58:59:WU00:FS01:Starting
10:58:59:ERROR:WU00:FS01:Failed to start core: Option 'opencl-index' has no default and is not set.
how to fix this?
i havent fixed it yet
My pc been folding for the past 5 days straight on max gpu/cpu overclocked. No crazy temps nothing over 70ยฐc. But does pcโs need like to โrestโ or stop for some reason so it does not damage?
@small current pause and restart
As long as temps are fine it won't need to "rest"
11:04:15:WU00:FS00:Assigned to work server 40.114.52.201
11:04:15:WU00:FS00:Requesting new work unit for slot 00: READY cpu:15 from 40.114.52.201
11:04:15:WU00:FS00:Connecting to 40.114.52.201:8080
11:04:36:WARNING:WU00:FS00:WorkServer connection failed on port 8080 trying 80
11:04:36:WU00:FS00:Connecting to 40.114.52.201:80
11:04:57:ERROR:WU00:FS00:Exception: Failed to connect to 40.114.52.201:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.```

@trail night Nope - they work like a machine ๐
@trail night rest. no, but pushing too much voltage could cause degredation
over long periods of time
Thank you. Keep folding then!
@trail night Consider running at base clocks and it'll run foreeeeveeeer
With not much loss in throughput
anybody has any idea on my problem?
config issue?
I mean cpu base itโs 3.9 im at 4.2 nothing to crazy
What? lol
@trail night If you're manually setting he CPU/GPU voltages then you could be running under the stock voltages with a mild OC, in which case you're doing better than stock so....
keep opencl value at -1? @wheat lynx
nvmd, i cant read

Whoa - something happened ....
you could try deleting the gpus and readding them
I' just got back-to-back WU and my second PC also kicked into life.
Noice
Has LTT just switched on their F@H server or something? LUL
Nope
my secondary server is at 24 atempts
Apparently they're assigning 123,000 work units per hour
every 12hrs for me it swaps between cpu wu's and gpu wu's i get
I've been pretty lucky today. Over night not so much, had like 7 hours waiting ๐ฆ
oop, my secondary got one
ok, setting cuda core index to 0 on my gpu wu, lets see if it works
you jsut complain then it workes
this line is interesting
10:11:03:WU01:FS01:0x22:Completed 1200000 out of 2000000 steps (60%)
10:11:03:WU01:FS01:0x22:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
I get that error message as well ๐คทโโ๏ธ
I also had 3 WUs in a row for my cpu this morning, but now have been waiting for the next for about an hour /shrug
gpu is still on its first WU
it didn't abort the WU
@dreamy hazel what does the Next Attempt: time show in the advanced control?
yeah it doesn't seem to affect anything
RIP stats
Latest update reporting 0 ๐ฆ
what is tpf?
time per fold
my gpu WU was 3hrs at start
the extreme overclocking site is almost up to date, while the official is broken
If the Next Attempt: time when waiting for a WS Assignment blows out to a few hours then pause the client, wait a few seconds then click Fold to resume it. It'll reset that timer
no such issue
The wait between checks gets progressively longer so if it fails to get an assignment a bunch of times it ends up waiting hours between checks
it just continued with the WU right after
Its only if you're waiting to get a WU
oic
ive been having luck with my bios flashed 2080ti but im still power limited so after this WU finishes im flashing this BIOS
@rich depot RIP extremeoverclocking stats for this update
wdym?
?
https://folding.extremeoverclocking.com/team_summary.php?s=&t=223518
Latest update is showing 0pts for all teams
F@H stats team summary for LinusTechTips_Team. Help Folding@Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
and users
got 18 minutes
ami crazy cuz im not seeingthat
Thats the ETA on the GPU project you are working
I know
oh the 0 point update?
web control isn't loading for me :D
How do you see that? @fierce steppe
thats an issue
How do you see that? @fierce steppe
@trail night https://folding.extremeoverclocking.com/team_summary.php?s=&t=223518
F@H stats team summary for LinusTechTips_Team. Help Folding@Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
It's just an issue with EOC not updating, the points are still there they will [hopefully] be credited in the next update in 3 hours
ive had it break in incognito
use firefox
where I have no control cuz my main system doesn't work with advanced
fair point
anyone seen this error?
11:11:36:ERROR:Receive error: 997: Overlapped I/O operation is in progress.
11:11:41:ERROR:Receive error: 997: Overlapped I/O operation is in progress.
11:11:46:ERROR:Receive error: 997: Overlapped I/O operation is in progress.
Sign ups end March 26 ^
they take a bit
only started 3hrs ago
My error is just could not get an assignment, because all this horde of new users.
WebControl never works smh
So @dreamy hazel that is probably why you wont get points
You can check it in the logs tab, inside the app
read something about that it may take a while
before i can actually start gathering points
i've shipped a few WUs
advanced control doesn't work for me. loads, throws error 997 and diconnects almost immediately
Oof
WebControl just constantly refreshes for me with no info is that samae as you have @trail night ?
incognito mode @pallid cedar
Goooood morning folders
@pallid cedar Yeah lol
use incognito mode or firefox
Ah that worked ta
Ok one other thing. I'm seldom inactive/idle so I've just set it to low all the time. However it doesn't utulise the GPU only the CPU is there a way around this? I'm usually on the desktop during the day working so the GPU is mostly idle and it's wasted ๐
Nope. Sometimes there are CPU work units, sometimes there are GPU work units and sometimes you get lucky and get both
Right so it's the work type not a application issue?
it depends on what work the servers have available at the time since everyone is folding and the processing power has doubled tenfold
@fierce steppe Dunno what happen with EOC, my stats data is fine
Yeah, definitely not an application issue
Super, thanks mate.
The guy behind EOC has been tweaking stuff today so that probably broke it
"doubled tenfold" hold up
But I have to say the data files and processing time has gotten WAY WAY bigger in the last 24 hours
I have noticed that it has taken 10-15min for the user data to update
gpu finished its WU 
Guess that must be why he's been tweaking
my first fold ๐
They've scaled up their Azure servers
noice
He posted a news update on the main page about what he was tweaking.
https://folding.extremeoverclocking.com/
Latest news for EOC F@H stats. Help Folding@Home fight Coronavirus, further medical research, and prevent diseases with distributed computing!
Our team alone has gone from 12k active folders to 36k in that 24 hour ish period
That's a great thing, isn't it?
Hell yeah
LTT today has done more than default
Not so good for F@H servers though ๐
I dont understand how PPD works, my CPU is ready and my GPU its working, So my GPU alone its making 3 million points a day?
That sounds like a LOT lol.
OMFG a 30 second unskippable spotify ad that is at 6000% volume MAKE IT STOP
I don't care about some chinese guys dream music
PPD is an estimate based on getting the same WU over and over again for the same device that is folding
if you have two devices working on WU's, that number doubles
it's a tentative number
470 PetaFLOPS is more powerful than the top 7 supercomputers combined
It's more than 470 now and would be way higher if all systems could actually get WU
I wonder if Linus' server he's getting from F@H will actually help them out
But I feel like we're gonna saturate that too
it'll help a bit
just a bit
fairly sure he's making it himself
But that isn't a complaint from me
But more importantly LTT team is higher than 100TFLOP so we are 2nd place top 500
we're probably still going to saturate it
It should help, but it will take time to deploy... You can't roll out a server over night
laughs in AWS @fierce steppe
at least a good one of this caliber
that's cheating ๐
Hehe
I don't know the exact specs of the servers intended to help F@H, but if I had the Business fiber connection that Linus has, damn sure I would have helped them out too.
Even the Azure F@H servers are down
Are they?
Ah. Because I have a WU from an azure server rn
maybe if Linus went absolutely insane, got a 400gbit/s internet connection running to it and make the entire distribution configuration as balls to the wall as possible, he might be able to help them enough so that there's less of a bottleneck
Don't think Telus has an internet connection that crazy
my guess :D
When you're working a WU the server doesn't matter, you don't connect to it. It's only when downloading and submitting that you connect to the servers
(thankfully or we'd never get any WUs completed)
there'd be a LOT of pair bonding if he did
nope, not really
Just a giant undersea cable running right in to LMG HQ
400gbits is only a number i hear from our datacenter lul
Uh
internally only afaik
Telus does NOT have anything like that lmao
internally probably
I live in Canada and can tell you Linus is getting ripped off for the price he's paying Telus for their business fiber connection
#JustCanadaThings
done with fold #3
in iowa, with mediacom in a small city, its bout $60 for 60Mb
i'm in germany and pay 30 bucks for just 400mbit/s down and 40mbit/s up
If I am running two computers is there a way to see both of their stats combined?
Dunno about that, the connect LMG has in to VANIX isn't ya bog standard good business connection
It's as if Telus gave him his own dedicated connection
Not that he needs it
@dreamy hazel vodafone/unity docsis works fine ๐
But the backend really looks the same
ye
Hey who pinged me
Can't remember if it was 10Gbit or 40GBit he got
Who did it
he said it was 10
10g
Okay that makes sense
this is patrick
roger that
my system is way under-cooled.
10G to VANIX, 5.5G transit/international
That's really not bad
not bad meaning great
But they did mention they are likely going to deploy the server off-site
Well I'll put it into retrospect. A lot of internet providers running FTTH to businesses / homes are cheaping out on hardware
But the difference is the direct path to VANIX, that makes all the difference compared to a regular business plan from an ISP
offsite to prevent an IP leak of sorts
Well at least it's not FTTN ๐ข
At least in Canada they're screwing around with it unless you have a business connection
https://cdn.discordapp.com/attachments/691788185986007051/691966385412243516/unknown.png yeah my rig gets pretty toasty doing just gpu folding
60C cpu 45c gpu
water?
yeah full custom loop
on air, my gpu hits 72ยฐC and my cpu hits 82ยฐC
my CPU is suspect
Most country's ISP suck, it;s just a matter of how much lol
nah @small current
Lead, you live in Canada or elsewhere?
tbh I actually like my ISP
NZ
K
It's the NBN that sucks lol
Gotcha
Aus is competing for worst place lol
Mediacom i almost my only option, thank goodness it isn't absolutely terrible
161 C ๐ฅ
This channel goes by so fast 0.o
Aus is competing for worst place lol
@silver wing Nah, it's okay mate. 5G will fix everything.... /s
I don't know if this is standard practice anywhere but I'll share with you what one provider is doing
without unitymedia I would be stuck with Telekom 16mbit/s and vectoring
AFAIK, GPON is used in FTTH in Ontario which splits 1 main fiber to up to 32 houses, sharing 2.5Gb/s of downstream bandwidth. Wouldn't this cause a huge bottleneck if everyone is downloading simultaneously? - This is for a company called Bell
That's common
@odd barn is it RFC 2549?
yep, sadly
I will ask in the forum
https://cdn.discordapp.com/attachments/550510187824414740/689608717280346263/image1.jpg heres my loop and my rig hits 80c cpu and 45c gpu folding full bore
with OC
Unfortunately I don't have that information
maybe, but having fiber is something of a luxury compared to what most is
@odd barn GPON is standard and is actually the best way to deliver fast internet
FTTH GPON is used here to and is excellent service and speed
Who else is coaxial gang?
in gpon normal thread is split among 48 others
coax sucks
Fibre is expensive over here still
am i wasting effort for folding without a passkey? im still waiting for the email and i already finish like 4 of them and it still say 0 points earned
or so
Gotcha
but it's not the best
Should i get DSL?
I am on LTE
doubt you could get fiber if you wanted to, other than a stupid high installation price
There are quite a few people here complaining after getting fiber saying their 1Gbps connection is only averaging 180Mbps and I'm like that sounds like a really big bottleneck, but we don't know how many people are sharing the same network with them
56Mb down is fine
am i wasting effort for folding without a passkey? im still waiting for the email and i already finish like 4 of them and it still say 0 points earned
@raven whale Whats your folding username?
Stats are taking a while to update at the moment.
Check your spam folder for your key and if its been >24 hours try requesting it again
We're getting Fiber ran to the home for free
Unfortunately most don't implement it very well
We just have to pay the setup fee which is like $149
and you need 10 wu's for the passkey to give boost, so do it in the meantime
All the trenching and construction is paid for by the ISP
gpon works when there isnt too big workload, as you can get 1/1 gbit connection but it's shared among 48 users after the box, let's say under the apartment building.
@fierce steppe 4RealGeek
GPON only sucks when you over provision the cabinet trunk
Lead, that's exactly what's happening
and that's true for all connection types
@silver wing Which is true for any connection type tbf
when there's too much usage like now u wont reach the speeds
actually not a GPON thing
Sadly, I'm on coax because that's the only way I can get a good speed
I get 350Mbit over CAX and it works fine
They didn't do pair bonding for DSL at my house, but they did for the rest of the street 
the nearest fiber i beleive is 6o miles away at the Des Moines junction
We're upgrading to 10GPON soon ๐
noice
We're still in our infancy with 1/2.5 looks like
OH, it gets better
The modems they send to be used, their ethernet ports only support 1.0Gbps, but they offer a 1.5Gbps plan
i'm luckz enough my apartment doesnt use gpon, so my cable isn't shared with 46 others ๐ altho i got 300/100 speeds, i'm not made out of money xD
and people are wondering why they're not getting those speeds
The other 0.5 is on the wifi ๐
@fierce steppe 4RealGeek
@raven whale I can see you credited with 1 WU so far for 9,405 points.
It is taking a long time to update stats though so it might be a bit behind what you've earned.
https://stats.foldingathome.org/donor/4RealGeek
lmao
Thankfully there are people who found the VLAN's for internet and all that, so a lot of them who can take advantage of this are just VLAN tagging and using their own consumer / prosumer hardware
i worked in tech suppport at my isp and set my own internet and static ip ๐ who else? xD
@fierce steppe ty
The modems they send to be used, their ethernet ports only support 1.0Gbps, but they offer a 1.5Gbps plan
@odd barn At least it supports gigabit... I've seen ISPs offer routers with only 100mbps ethernet ports
Yikes
oof
Or 1Gbps ports with 500Mbps switching and NAT capability
They would be like the "Free, included with your plan when you sign up for 24 months" sort of wifi routers though.
yeah, common to just purchase an own router/modem/switch i suppose
If I do get FTTH, definitely switching all my gear to ubiquiti
yeah we also had old routers with 100mpbs, and complaints, but field technicians should know to install proper ones haha ... human error
11:50:25:WU00:FS01:0x22:ERROR:exception: Error initializing context: clGetDeviceInfo (-5)
11:50:25:WU00:FS01:0x22:Saving result file ..\logfile_01.txt
11:50:25:WU00:FS01:0x22:Saving result file science.log
11:50:25:WU00:FS01:0x22:Folding@home Core Shutdown: BAD_WORK_UNIT
11:50:25:WARNING:WU00:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
just got this on my gpu wu, dont know why
gpu is geforce 820m no oc, the only thing i changed is set cuda_index to 0
mikrotik hEX would be a better choice
ubnt ERLite is kinda meh for advance configs
The model that was recommended to me to work with this bypass was a Mikrotik Cloud Router Switch
CRS125-24G-1S-2HnD-IN That was the model
i find it annoying that the router i got is so "end-user friendly" that I can't adjust stuff like the DNS server...
ouch
interface doesn't look like it's older than windows xp though, i guess that's their selling point - still annoying
Aight I gotta go pick up some stuff, will ttyl
my poor Dell R720 drawing 602 watts folding
600 watts, that's a bit
GTX 1660Ti also used
would be nice to use as little as 600W
well if i put my other servers online, i'd blow breakers
mine pulls under 200w, with 550k PPD
just put in a 290X, you'll pass 600W easy ๐
295X2
or like me have 2
ouch
800W ftw
what the current climate in NZ?
sounds like Iowa all year
@silver wing sent you a DM
its been 60f for weeks but it snowed 2 days ago
34 attempts 0 WU for my poor 1080
you reset after an hour?
ouch
1 of my cpu's has sat dry for 12 hrs now, but the gpu and other machine have ahd work
CPU and GPU 1 of this rig has not gotten any WU's since I started the program
What do we want? WUs. When do we want them? Now.
