you should only see 192.168.10.1 then stuff to your ISP
#networking
rocky badge
lean pebble
I think he have 2 routers
rocky badge
if its showing 192.168.100.1 as a hop, then your Arris modem is doing NAT
south blade
TP-Link Archer C7 V2 with DD-WRT firmware
rocky badge
That's probably in AP mode then
what does ipconfig show on a wifi device
or default gw
in iOS or Android
south blade
This is what happens when you follow guides without knowing what each setting is actually doing. 😄
lean pebble
Lol
peak cloak
yep, I mean I was kinda in the same boat
I redid my network multiple times already
now I actually am documenting things
south blade
PFSense has been needing an update, I'm afraid to even get that started again in my tangled mess. xD
south blade
Oh, no, that I was sure to disable on the TP-Link Archer C7 . 😄
lean pebble
If you connect your pc directly to you archer do you get IP of 100.0/24?
Are you 100% sure ?
south blade
south blade
NAT on the TP-Link, I don't know, where would that setting be so I can check if it's disabled?
lean pebble
Can you picture his interface ip address?
You connect to your archer with 1.100 right now ?
south blade
the pool starts at 10.100
lean pebble
Pfsense pool ?
south blade
Yes
south blade
I think I'm going to have to leave this rat nest as is and buy another box to install PFSense on and another router to start from scratch. 😄
lean pebble
Lol
peak cloak
I honestly don't like using pfsense or other software routers as core home routers
lean pebble
You just need to reconfigure your archer
Change his ip to something that in 10.100 pool
Look what ip is free and give him
south blade
Reason I got PFSense box is 300Mbps+ of my full bandwidth for VPN speeds. 😛 Router could only do like 50Mbps.
lean pebble
Your pool is 10.100 to 10.254?
south blade
just to 10.120
lean pebble
Mm ok
peak cloak
@south blade mtik is really nice for cheap, but really good network things. I plan on getting the HEX S
lean pebble
Before changing settings I always exporting the working configuration for backup and fast recovery
lean pebble
I made the same mistake more than 5 times till I decide to do it
peak cloak
restarting the router will revert back to the changes before you commited
saving them saves them permantly
idk if pfsense allows this
lean pebble
In my router I have only save no commit
peak cloak
but edgemax and vyos do
at least in cli
not gui
vyos has no gui
I use it for my kubs cluster
kinda nice to learn
south blade
Why can't PFSense box itself do WiFi, that'd make things easier.
lean pebble
Ya I did this mistake to. My fortiwifi did all the wifi at the beginning before I bought mesh
Was hell
I have tenda nova mesh
3 mesh point all of them connected with straight cable to my router
And covering all the house with 5ghz like cable
snow spoke
any juniper gurus here? need a quick info 😉
snow spoke
basically i need someone who is a verified member on their site so he can download the official firmware for me, for an old device i got ;D
the verification takes 48hrs which i dont have
and the current fw is ultra buggy and very old
lean pebble
Oh
Sorry I can't help with it xD I don't have account there.
I need the same thing for fortigate
I think they release a new frimware for my device
snow spoke
do they also have such a paranoid customer care service? ;o
snow spoke
this is pretty crazy.
like i have 2 days to do something at home, noone bothering me, and i need to be approved to download a stupid file from a server
lean pebble
I never paid for license I bought the device from eBay
snow spoke
i did
peak cloak
those are enterprise things, support is a big thing in enterprise. They kinda expect companies who buy their products to buy support
why I don't like enterprise network devices
snow spoke
but this was years back. i just wanted to use this oldie as a vpn gateway since it's still pretty cool
lean pebble
No need support I just want the frimware
snow spoke
yes i know
peak cloak
yeah, but don't you need a support sub for the latest firmware?
snow spoke
the had a field when signing up.. like enter the serial nr of your device so we could verify you faster..
i typed in the number and the device didn't match up
to that's about their db
lean pebble
In fortigate you must have license for download frimware
snow spoke
@peak cloak i'm actually not sure. it's just a newer version of the fw, it's not a license bounded thing afik
lean pebble
Even if your device connected to your acc
The license is more expensive that the device itself
peak cloak
I know HP has that with servers
lean pebble
I can ask from my old boss on my old work but I don't want xD
peak cloak
I was looking into buying a used HP server, but ultimately decided against it
lean pebble
Nice company
There is another one but I forgot their name
Something with micro something
primal ice
supermicro
snow spoke
you can get old proliants from hp like really cheap. but it's not dell
so no supermicro? 😄
snow spoke
my first server was a P100
lean pebble
I need rpv4
primal ice
my first server was a x58 motherboard with 12g ram running linux mint :p
lean pebble
But I'm jobless rn so can't buy
peak cloak
lean pebble
Nice
rocky badge
Arris
peak cloak
gonna be gone in a few weeks
lean pebble
Not nice on Arris
snow spoke
🤐
rocky badge
@peak cloak I need a rack
peak cloak
I got this one for 50 bucks off facebook marketplace. Marketplace was a terrible experience as I didn't have a facebook account but it was such a good deal
lean pebble
gonna be gone in a few weeks
@peak cloak that's why I heard from the ISP about the fiber connection 🤣
peak cloak
switching ISPs
lean pebble
I need
peak cloak
gonna have dual WAN for a couple of days
lean pebble
But because I live in private house they didn't connect me yet
rocky badge
I need a rack to actually put my switches in and my server lol
My server is just sitting on a table
lean pebble
And the fiber is under my house
peak cloak
fiber is right above the street for me
rocky badge
Then inside
peak cloak
ah, that makes more sense
wary jolt
Yeeah, that makes a lot more sense lol
rocky badge
Yeah the splice tray is behind the ONT itself
wary jolt
I assume the ONT also has a battery backup?
rocky badge
Nope lol
wary jolt
Huh, thats interesting.
rocky badge
power comes from inside the house
primal ice
not all of em do and now most of the time you have to ask for the battery back up - but that is generally for Voip service.
rocky badge
@peak cloak
peak cloak
nice
rocky badge
At night 😄
wary jolt
telco I work for always has a battery backup, I assume to protect it from powersurges
primal ice
its for the phone service.
if you have just straight internet if the power is out . 🤷
primal ice
hrm
rocky badge
"Looking at your setup, you might want to plug this transformer into your PDU instead of the UPS directly"
I'm like, yeah...no shit
literal definition of wall wart
primal ice
k well you are suppling your own power backup then heh.
waxen scroll
@rocky badge grats
hollow marlin
@snow spoke I take it you are using the old Olive vMX images?
snow spoke
@hollow marlin not sure bro what image it is. It's the latest netscreen that I need
hollow marlin
Well netsceen has been EOL. vSRX is the latest image. I can check with my account but I don't think the images are still up.
lean pebble
Hey guys, someone can help me find what is the wired issue I experience with my network card on fedora 31?
For some reason my internet slow af in fedora 31 but when I use my vm with my second network card it's working perfect.
thick minnow
Uh can u pls be specific about the issue?
lean pebble
Ah I forgot to check here answers 😅
I managed to fix it
The problem was ssl inspection from fortigate
thick minnow
oh nice
thick minnow
hmm
lean pebble
I think my fortigate is about to die
thick minnow
sed
thick minnow
bruh
thick minnow
lol
lean pebble
Long time ago
thick minnow
how was it working till now?
lean pebble
A small change big difference
thick minnow
:/
thick minnow
then use proxy
lean pebble
But I don't want to use my proxy all time
lean pebble
Nah, the issue that I need windows machine with the old fortigate program
Connect it via console
thick minnow
hmm
lean pebble
Easy fix
thick minnow
then its all good ig
lean pebble
To lazy to go down and take my mother pc
thick minnow
:/
lean pebble
All my pcs are Linux based
lean pebble
2
thick minnow
bruh
lean pebble
Laptop and a pc
lean pebble
Mine from 2015
thick minnow
nice
lean pebble
What website
thick minnow
a website for my bot
lean pebble
I'm managing servers with nginx hehe
lean pebble
Bot that does what ?
thick minnow
discord bot
lean pebble
Botnet bot?
lean pebble
Haha
thick minnow
no
lean pebble
Now it's only a chat that I'm transferring all the things I need from my phone to pc
lean pebble
Paypal api is easy idk about discord
lean pebble
Ahh
lean pebble
Do automatic tasks
thick minnow
bruh
lean pebble
Nah
I already did 1000000 reboots
And it didn't helped
Idk what is the difference now
thick minnow
hmm
lean pebble
I'll start my windows machine and I'll fix the other forti
lean pebble
I hope I have another power supply for him
thick minnow
or dual os?
lean pebble
Kvm
thick minnow
oh
lean pebble
Just needed to reconnect the network cable
thick minnow
:/
lean pebble
My mb have 2 network cards included
lean pebble
The only issue with kvm that I need to pray that windows will get ip without doing the user password
thick minnow
:/
lean pebble
Windows is too stupid for it
lean pebble
Need to find a way to make him get ip
thick minnow
prob cmd
lean pebble
I don't have access to it
lean pebble
At least parsec manage to get him
thick minnow
bruh
lean pebble
Hahaa
lean pebble
Windows went boom long time ago
thick minnow
every update is making the pc laggy
lean pebble
Never update
lean pebble
And every update takes 4 ever in windows
thick minnow
linux has top-notch security ngl
lean pebble
Connected
cobalt frost
Think Windows takes a lot of time to update try macOS.
cobalt frost
Windows 10 has gotten way better. Usually pretty quick.
lean pebble
After you see the speed of Linux update you understand that windows never will get there
swift tree
im a monster who doesnt update linux
waxen saddle
Windows is going to have a lot more exploits if it remains unpatched.
cobalt frost
I use linux... It's just as annoying sometimes.
thick minnow
Bruh
lean pebble
Nah just install office and you'll get all the exploits you need on windows even if you update it
cobalt frost
Thinking linux systems do not have exploits as well.
peak cloak
much less though
lean pebble
They have but much less man
waxen saddle
An OS should not offend.
lean pebble
Don't forget that Linux is open source and doesn't needs cdkey / serial key like windows
waxen saddle
We didn’t forget
thick minnow
Pricing
swift tree
people use linux as a general term for 10000s of linux distrobutions
you cant be general as theres less exploits
thick minnow
Is a serious issue
swift tree
theres payed linux distros
thick minnow
There's open source too
swift tree
all the payed distros are actual rubbish
waxen saddle
Businesses seem to disagree
cobalt frost
I prefer RHEL over a lot of the other pure OSS distros.
waxen saddle
But we are now on the brink of an OS holy war. Which is off topic for networking
swift tree
I prefer RHEL over a lot of the other pure OSS distros.
@cobalt frost i like rhel to my home server runs centOS i think
waxen saddle
Can you resolve hostnames off-proxy?
cobalt frost
Yah CentOS is basically free RHEL. I use it when I just want to toss applications on there and have it work. OSs like Arch and Fadora suck for servers as they follow the bleeding edge and will constantly break things.
lean pebble
This is the error I get on firefox on my fedora main
swift tree
Yah CentOS is basically free RHEL. I use it when I just want to toss applications on there and have it work. OSs like Arch and Fadora suck for servers as they follow the bleeding edge and will constantly break things.
@cobalt frost one os i hate the most is manjaro just arch for people who are too scared for arch
waxen saddle
Check the certificate for google. I believe it should tell you where the breaker in the chain of trust is occurring
cobalt frost
Google uses cert pinning so you can't MTM their SSL certs.
waxen saddle
I’m sure there’s a way. Mcafee figured out how to proxy their site
lean pebble
You can do it if you're good enough in what you do
I hate mecafee
I have my own proxy server
waxen saddle
Does it proxy https?
lean pebble
Ya
But I'm not using it right now
This happens only on my fedora
I have windows kvm working perfect
With google
And ff
waxen saddle
Is the browser itself set to use the proxy? Or is the proxy only enabled/disabled on the system level?
lean pebble
Proxy only on firefox
But I disabled it for now
My proxy does a decent job without losing speed
cobalt frost
Are you actually decrypting SSL traffic?
waxen saddle
Any firewall blocks to countries, regions, providers? Like a cloud flare block?
lean pebble
Nope
waxen saddle
What does the cert say? Does it give any indicators as to where the trust breakdown is occurring?
cobalt frost
If your proxy is MTM the cert it's most likely HPKP thats blocking it.
lean pebble
My proxy working great with google
Only while disabling my proxy google not working
Working only after I do ctl + F5
cobalt frost
What kind of proxy is it?
cobalt frost
Okay so it's just a regular proxy.
You mentioned Fortigate so I didn't know if the security proxy was doing something.
lean pebble
Ya
Nah the proxy only for the browser not from fortigate
I'm reconfiguring my second fortigate now for testing
I hope it'll work
hollow marlin
What would trying another FG help with browser proxy on a single PC?
lean pebble
Can't access google only when I'm searching from the URL
hollow marlin
But you said its only happening on a single PC
lean pebble
What would trying another FG help with browser proxy on a single PC?
@hollow marlin
The proxy is not part of forti
Ya trying everything
I even tried reinstalling firefox
hollow marlin
Yes, its not part of it, thats why I am curious why re-configuring another FW would resolve the issue
lean pebble
And reinstalling network manager
Idk maybe configuration problem somewhere
I even talked with the ISP nothing helps
hollow marlin
Its not a config issue. IDP/IDS would be reaching as well.
Are any other devices having this problem?
waxen saddle
The search provider is messed up. I believe it saves the search provider in your profile, so it carries over through installs
lean pebble
Only after ctl + f5 it loaded
waxen saddle
If you can’t fix the search provider (remove, then re-add it), then try closing browser and renaming the config folder
lean pebble
I already removed all the firefox folder from my machine
waxen saddle
If on windows, it’s under %appdata% (local/remote)
waxen saddle
Gotchya.
lean pebble
Already completely removed it
Twice
Wait
Not it's not my account problem
I have it in chrome to
waxen saddle
I’m at a loss.
lean pebble
Me to
Well now I completely fucked my second forti 😅
Accidentally changed him from switch to ports
🤦
waxen saddle
I have to convert over my entire IP addressing scheme to something else because Apple
...Apple doesn’t handle VPN properly
rocky badge
@waxen saddle Did you see what's new with VPNs in Big Sur
lean pebble
There is something that they handle properly?
rocky badge
Apple apps and services don't go through a system VPN and are unaffected by a firewall on the OS
waxen saddle
If the iPhone/Mac is on a LAN with say, 192.168.1.x/24, and the VPN is 192.168.5.x/24, and you want to reach 192.168.1.x/24 Through the VPN (NOT the local LAN), Apple devices completely fail.
rocky badge
🤔
waxen saddle
Side note: I’m pretty sure I found evidence of code sharing between iOSand MacOS. 🙂
hollow marlin
If the iPhone/Mac is on a LAN with say, 192.168.1.x/24, and the VPN is 192.168.5.x/24, and you want to reach 192.168.1.x/24 Through the VPN (NOT the local LAN), Apple devices completely fail.
@waxen saddle that's normal. No matter the OS in that situation, 192.168.1 appears to directly connected.
rocky badge
^
Imagine not being able to control system level traffic
Well, on big sur you don't have to anymore 
karmic sapphire
rocky badge
Just because its expensive doesn't mean its good 🙃
peak cloak
@lean pebble but your mesh isn't real mesh, it's more like seamless roaming?
wired backhual
unborn sluice
that's meshy
peak cloak
oh
peak cloak
I thought I heard someone said they had a wired mesh
rocky badge
mesh 
peak cloak
^
lean pebble
My mesh connected directly to my router
rocky badge
I just have UniFi APs lol
peak cloak
oh, I thought you mean a wired backhaul
rocky badge
peak cloak
I just have one AP, small house
lean pebble
Mine are ap to
rocky badge
2000sqft, 3 APs
lean pebble
Mine 800 I think
peak cloak
1,400 sq ft
peak cloak
I may add some more AP's in the backyard and basement once it's finished
rocky badge
lean pebble
Cover all the house with 5ghz
rocky badge
In my room
lean pebble
I have 5ghz
peak cloak
what program is that? Some unifi thing?
rocky badge
WiFiMan
lean pebble
And 2.4ghz only work when it's needed
peak cloak
thx
lean pebble
I'm getting full speed with my mesh
lean pebble
Lol
rocky badge
but I'm probably gonna get WiFi 6 APs
lean pebble
You have 1/1?
rocky badge
Gigabit/500Mbps
rocky badge
Better than what Spectrum offers though, 980/35
lean pebble
1000/100
peak cloak
getting 500/500 soon
rocky badge
https://store.ui.com/collections/unifi-network-access-points/products/unifi-6-long-range-access-point
https://store.ui.com/collections/unifi-network-access-points/products/unifi-ap-6-lite
And UniFi WiFi 6 APs are finally GA
they're no longer "beta"
lean pebble
The only company here that provided 10001/1000 not providing shit
rocky badge
but I'm waiting for 2.5GbE/5GbE APs
peak cloak
I may get this since I already have omada one day
rocky badge
because fuck non DFS 5GHz
lean pebble
There is no ISP in my country that gives fiber to private house
They just connecting building
rocky badge
lean pebble
So I have fiber under my house and no one willing to connect me
waxen scroll
they will, for $5-8000/m
you're not looking hard enough
call ATT, Verizon, Zayo, Sprint business sales
usually theres no such thing as no. they'll find a way to tear up your neighborhood if they have to
but you need to pay
@little schooner tales from school IT?
little schooner
Nothing noteworthy to report from school IT as of today. Things have been pretty chill because most of the staff and students aren't on campus.
I've wrote a couple new powershell scripts to use in the computer imaging process so I've been happy with that
I finished one that also does bios update by matching the model
the files get dropped during imaging if it needs it
they had a domain join script that didnt work as well so I fixed that up too with specific error handling and verbose output for troubleshooting.
I am making it easier for everyone basically.
im gonna miss the quietness when the whole covid thing is over
waxen scroll
little schooner
They are happy with my work output so far.
Sharepoint is nice for sharing documentation.
lean pebble
call ATT, Verizon, Zayo, Sprint business sales
@waxen scroll lol I'm not from united states
waxen scroll
those vendors are international as well
lean pebble
Not in my country
peak cloak
@lean pebble where are you from?
lean pebble
Israel
little schooner
When I go to sprint.com it redirects me tmobile, yet their account systems arent merged yet
and i get redirected back to sprint login form
lean pebble
Lzdandger user you watched the demon king academy
lean pebble
Anos pic
waxen scroll
@little schooner so when is the bonus, raise, and promotion"
@lean pebble it was tatsuya for a while but anos strongest boii
lean pebble
Ya
Well it was fucking cookies cache and offline site preference
Gg firefox
Idk what helped 100% because I did some modifications to my router so...
I hope it'll stay good like now
little schooner
@waxen scroll well I technically finish all my classes by December and I dont get my diploma until january. Im sure HR will let me provide the official transcript and count it as having it, and the raise should follow shortly after
they dont know what the campus plans are for next year so it all depends on that
they are losing alot of money
little schooner
Well yeah i suppose
but they want MORE
Im safe since the day i started
they wont cut me
In my specific case, IT is considered essential worker
lean pebble
Zoom classes
little schooner
they need us.
lean pebble
IT is necessary in schools / university campuses
Without them no internet for this places
lean pebble
Ya for turn it on
little schooner
heh
waxen scroll
lol
lean pebble
Lol
little schooner
so true
waxen scroll
last school i did IT for did just that
little schooner
was it a private school?
lean pebble
I'm doing IT at home
waxen scroll
private... yes. but its tons of schools under one company
little schooner
i see
its a tough business decision to make because they have to let go so many people
lean pebble
I did IT in school when I was a student
little schooner
unless if they never cared about their employees
waxen scroll
they tried to offer me a job with the outsourcer and i was like ..... get out of here.
little schooner
lool
waxen scroll
i gave them 1 day notice and trained nobody
lean pebble
Hahaha
little schooner
good call
lean pebble
Just what I did at my work
I gave them notice they decided to hire someone 2 days before I left
So nobody trained
On the company systems
waxen scroll
those jobs are nightmares... staying behind to train outsourcers employees.
signal jay
If I'm using NGINX as a Proxy for subdomain proxying (For example: example.example.com > localhost:8080 for my ADS)
Do I edit the config as such:
listen 80;
server_name example.example.com;
location / {
proxy_pass http://localhost:8080;
}
}```That almost going down
signal jay
This approach hasn't worked for me yet. Sadly. Any input would be sick
lean pebble
Actually I'm using nginx but as main web server , never tried as proxy
waxen scroll
@lean pebble then i got outsourced at another job and they said "nope. just leave. we'll pay you for 3 months"
signal jay
Hmmm. I can get it to run fine it just wont actually redirect anything via that method ^
signal jay
I'm essentially running a single domain and IP as if it was multiple IP's
lean pebble
You mean it's not redirecting you to port 8080?
signal jay
So, Domain > port 80, subdomain 8080, subdomain2 8081, ect ect
Correct
The subdomain example.example.com goes to 8080
while example.com goes to 80
lean pebble
The proxy as you configured redirect back to 80
Because 80 is your main port in config
lean pebble
I think you need listen on 8080 and proxy to 80
signal jay
Yeah
lean pebble
Try change your configuration to port 8080 and proxy to 80
signal jay
I need nginx for my custom console site OOP
lean pebble
Are you paying for pro ?
lean pebble
Easy approach
signal jay
Wym ;o
lean pebble
I'll get to my pc and I'll send you the command
You can do it easily with simple firewall rule
signal jay
On cloudflare?
lean pebble
On your machine
signal jay
Okay
signal jay
Windows ^,^ Cause I had all my older-shittier stuff their and haven't migrated.
lean pebble
Ah shit I'm not familiar with windows
I left them since Microsoft told me that my SSD is about to die
Because their system is shit
signal jay
Yeah a lot of this would be SOOO much easier on Ubuntu ffs
I have too much data to migrate just yet though
signal jay
Mostly individual MC servers
signal jay
Well, not with my webserver and ADS console
signal jay
It's a custom software that allows you to create new servers for pretty much any game in a matter of seconds
lean pebble
Google ads ?
signal jay
nahh
lean pebble
Haha
lean pebble
Oh ok
signal jay
To migrate over I'd have to do a fresh install and rebuild everything
It would be a missive pain
10 Instances linked to 3 Dedi's all handling servers together >,<
lean pebble
You got 3 dedis?
peak cloak
@lean pebble srv is just a type of dns record
Minecraft looks at the srv record (if it exists) and connects via the port specified on the srv record
lean pebble
Nah in cloudflare pro you can just proxy port 25565
peak cloak
yeah, but why proxy, just use an srv record
lean pebble
For low latency
lean pebble
Nope
peak cloak
yes, but in the end if still goes to your server
lean pebble
Ya from cf
peak cloak
lowest latency to cloudflare, but not lowest latency to your actual server
peak cloak
yeah, but not 5 ping from cf <-> server
lean pebble
Same
peak cloak
that 5 ping is not total
lean pebble
Max of 55 packets all of them between 5 to 15 ping
signal jay
You got 3 dedis?
@lean pebble 3 dedi's for this setup o.o
I forget how many I have unused atm
signal jay
Cloudflare pro handles proxy's for you?
well, essentially what I'm doing with nginx ^?
signal jay
Hmmm, thats alright with me
peak cloak
helium electric, they have a really simple website, but they are one of the biggest isp's
lean pebble
Incapsula crashed alot and hacked
hallow nimbus
press X if you know that CF goes down more offten then other people think
waxen scroll
X
hallow nimbus
X
lean pebble
I saw only one time that cf was down
Only 1 pop that in my country
He.net can fall to you know
signal jay
I haven't had any issues
peak cloak
yep, just that I never had issues with he
signal jay
so I have left it alone
lean pebble
My ISP not 2 good but is the biggest here
peak cloak
you can check what your isp peers with
peak cloak
wow, that sucks
peak cloak
top 27 peers
waxen scroll
mmmm comcast
lean pebble
I wish the internet ISPs in my country will get a brain 🧠 and connect themselves to europe
lean pebble
3 weeks ago all the ISPs here crashed and no one could access to websites and services that out of my country
signal jay
ouchie
severe venture
anyone running 1.8.3 on their unifi dream machine base?
south blade
Is Starlink available yet? D:
south blade
_>
peak cloak
south blade
hol up, I just saw a Facebook ad the other day for a service that says it's not dish for rural areas, up to 100Mbps
waxen scroll
i was ready to try it but $100/m isnt worth it
peak cloak
I mean, if you are paying 100/m for hughesnet or visasat it's probobly worth it
but if you have other options
south blade
No, it was another service, it said $45/m with unlimited bandwidth
I think it was these guys https://www.kpevolutions.com/
What does AT&T have for residential internet? Apparently these guys are partnered with them. Edit: Only similarly priced service I see here is $55/m with a 1TB cap. https://www.att.com/internet/
signal jay
Nginx localhost:80 works, my subdomain + port :8080 works, but this:
server {
listen 80;
server_name example.com;
location / {
proxy_pass https://localhost:8080;
}
doesn't ???
lean pebble
Still same problem?
south blade
Aren't you missing a }?
signal jay
Just gives me a 523 error
signal jay
http {
server {
listen 80;
server_name example.com;
location / {
proxy_pass https://localhost:8080;
}
}
}
lean pebble
😅
signal jay
On cloudflare it's setup as an A
The A.example.com is directed to my main IP or domain
Then Nginx should hanlde the rest eh?
pulsar thorn
nginx should see what the request url is and work with that, you're right
lean pebble
It got fixed
pulsar thorn
good to hear 
lean pebble
I hope my firefox issue will leave me alone and never come back
I uninstalled it and now using from source
nova igloo
@signal jay Why https when its internal network
jaunty talon
Always use HTTPS when you can! =)
But in that case it doesn't make sense to proxy HTTP to HTTPS, should be a redirect to HTTPS :)
lean pebble
@signal jay Why https when its internal network
@nova igloo not needed http/https while you set proxy like this
It already got fixed
It goes from port 8080 for example to port 80 on the main machine
Nginx on the docker machine and nginx on main machine.
Docker machine configured only for internal network
Main machine for external
nova igloo
oh so u mean u r getting error when theres http/https
lean pebble
Ya was error 523
But got fixed I helped him yesterday
The problem was the https://localhost
Should be for example proxy_pass 10.10.10.1:8080; instead localhost
That was the only change that was needed
wintry fjord
why ethernet not work?
unborn sluice
why would it
lean pebble
Because the docker only with internal IP
Only the main machine have external IP address
nova igloo
Yeah docker will never have external ip
lean pebble
burnt epoch
Got a bad UPS and need someone to convince me to not plug in these switches directly to wall power
waxen scroll
why
do what you have to do
im going to get chewed out by management if i say "i refuse to use house power" while the building is down
lean pebble
Lol
Got a bad UPS and need someone to convince me to not plug in these switches directly to wall power
@burnt epoch just go buy a new UPS
burnt epoch
Lol I’m not buying a new UPS for my work. They would never pay me back
lean pebble
Oh in this case connect them to the wall
😂
I thought they are in your house
Did you told them to buy a new UPS? @burnt epoch
burnt epoch
Yeah. I did. I also plugged the phones into the wall but now people can call me again
I just want to be left alone 😂😂😂
upbeat flint
Have anyone tried setting up Wake-on-LAN on a X570 mobo?
I suck when it comes to networking, and have shitty modem/router provided by my ISP
peak cloak
i mean it should work, you just need a device to send magic packets
lean pebble
I just want to be left alone 😂😂😂
@burnt epoch hahahaha I know the feeling
upbeat flint
but setting in up was a painful and fruitless process so far
lean pebble
I did the same thing 🤣
upbeat flint
I tried following some guides, but my router's settings page is a horrible mess
it's a Technicolor CGA2121
peak cloak
how are you setting it up, it should just be an option and then configure a server of some sort to send the packets
oh ew, on the router itself?
upbeat flint
I want to set it up in a way, so that I would be able to send the packet from my phone
upbeat flint
so I can access remote desktop even when I left my computer turned off
unborn sluice
so I can access remote desktop even when I left my computer turned off
hmmmm
lean pebble
Just leave it on
lean pebble
It's like drive your car when you don't turn your car switch on
peak cloak
my motherboard integrated NIC has WOL
lean pebble
From what I saw home motherboard / network cards not support wol
upbeat flint
Well my MOBO definitely supports WOL. It's a Gigabyte x570 AORUS Elite
unborn sluice
From what I saw home motherboard / network cards not support wol
really, i thought most mobo should have that
lean pebble
Strange my old i7 didn't had this option
unborn sluice
even my "value" mobo have that
peak cloak
it's not cpu, it's mobo
lean pebble
I know
unborn sluice
Strange my old i7 didn't had this option
why would a processor have that
upbeat flint
There's even option to enable/disable it in BIOS
lean pebble
I had i7 mobo
unborn sluice
oh misunderstood
unborn sluice
i haven't used WOL in a while , but isn't there some sht you also need to do in windows
upbeat flint
yes there is, and I did that
lean pebble
What mobo do you have ?
upbeat flint
I think it's just that I can't configure my router properly
and the setting for it are a clusterfuck
peak cloak
you are sending magic packets from the router?
upbeat flint
no, I want to send it over my home network from my phone
peak cloak
so you need a vpn
peak cloak
plz don't port forward
lean pebble
Or both
upbeat flint
nonono, I don't need to be able to send the packet when I'm outside my local network. I just need it to work when I'm at home
lean pebble
Just go to your pc and click on
peak cloak
and your phone is creating the magic packets and sending them?
unborn sluice
Just go to your pc and click on
is that possible?
lean pebble
Stop being lazy
upbeat flint
I tried using different apps
peak cloak
just to make sure.. you are on ethernet right?
upbeat flint
When I'm in bed and suddenly want to watch a tv show that's on my PC I don't want to go to another room to power it on 😄
lean pebble
No ethernet
peak cloak
no, like is the pc connected via ethernet?
upbeat flint
no, like is the pc connected via ethernet?
@peak cloak yep
lean pebble
While connecting your wifi
upbeat flint
but I think my router settings are the real problem
lean pebble
You can try you have nothing 2 loss
peak cloak
how would router play into this?
unborn sluice
why not use wireless power buttons
they actually exist
so you plug them into the mobo isntead of the front panel
then uhm, press the button
peak cloak
my friend used an arduino with a bluetooth module which would short the motherboard power pins and turn the pc on
upbeat flint
But I believe I have to set up port forwarding in my router settings, and there's no such option. I mean I'm sure there is, but it must be hidden somewhere or called differently and I'm not a network savy 😦
lean pebble
Nope
peak cloak
why would you need port forwarding
unborn sluice
please remove that
lean pebble
It's local
peak cloak
umm, port forwarding isn't local
unborn sluice
so it works pc -> pc, but not phone -> pc ?
lean pebble
Local all open by default
upbeat flint
But I also need my PC to always get the same local address, right?
lean pebble
Ya
peak cloak
setup a static dhcp lease
upbeat flint
lean pebble
But with fing you just can see all the devices on your network and sent them wol
upbeat flint
where? 😄
peak cloak
LAN and DHCP?
upbeat flint
But with fing you just can see all the devices on your network and sent them wol
@lean pebble would I see a device that's powered off?
lean pebble
Nope
But it saves the last scans
If you put static ip for your pc then you don't need to worry
peak cloak
make sure the static ip is out of dhcp range
lean pebble
Add dhcp reservation
peak cloak
I find it easier to just setup a static dhcp lease
peak cloak
nope, if you have a static dhcp lease no need to do it on the pc
lean pebble
Then add another dhcp
peak cloak
you are just making it more complicated
peak cloak
yeah, that's what I said
lean pebble
That's what I said
lean pebble
Hahaha that's what I said to > that's what I said
@unborn sluice
upbeat flint
it is
lean pebble
Be 100% sure before you save
upbeat flint
it is, I copied it from another page. no place for mistake, it's the only thing connected via ethernet
lean pebble
Ok
You can change the ip
To yours but if you change it put /32 at the end
Instead /24
upbeat flint
I'll turn it off in 7 minutes, cause I'm technically still at work and I can't log off the system :p