#networking
1 messages Β· Page 145 of 1
so through from the aggregation point you ran your wires up through the wall and into the attic?
Yah and then down to wherever I needed them
Then I just connected from the wall in the aggregation point to the switch and everything π
i've heard some ppl would run pvc pipe and put the wires in them to help with future wire changing in mind
Yup, I didn't do that (for some stupid reason I didn't think about it) but yes
i wonder if you just have a big pvc laid across the top and just drill holes to let a wire leave the pvc and go into a room.
or have pvc piped all the way down the wall. that sounds like overkill tho.
If you have a multi-story house then having at least one that goes down to the crawl space from the attic is good
But otherwise you don't really need to do it down each wall
do you have to worry about cooling for your setup? since it's in the closet?
Yah, but I've got tons of servers too
If you just have a switch and modem then you don't
running media servers? or just backups?
Media server, backup storage, various VMs, etc.
@noble halo that really sucks about your ISP, if it was me I would be harasing them every day with a speed test report
yeah im going to contact them today. i had them come out last week and the guy tested the line and said it's reading where it needs to be. but he was supposed to come out when it was happening around 8pm but he came at 5pm when everything was fine. he just told me that they put a flag on the modem and they had a service that would alert them if the speeds dropped. i think it was bs but i gave it a few days
just really making me mad. i can't game with my buddies or anything after 8pm
when I built my first house I knew the builder and he let me run my own network wire before they put the sheet rock up, I didn;t bother with running conduit, but it is a good idea
cable? typical delay tatics
the fact is with a cable run it only has some much it can handle before it slows down network, and you dam wwell video is going to get preferance
yeah but that much is crazy
in my current house its jsut a one level so I ran all my network in the sudo attic
well not really, how many TV do you have in your apartment?
my buddy had the same problem at his house.. he had to call them every week for months. even the contractors that came out on the calls told him it was the ISP and they needed to get ISP themselves to come out and fix the line. so the contractors ended up shutting off internet at the neighbors house so it would alert the ISP lol
lol
my apartment myself is just internet. no cable TV. i just stream
well typical would be 2 maybe 3, x x units all feeding from one line in
one contractor that came out who i made friends with a few months ago said he had a problem once where someone's TV in the neighboring apartment leaked into the stream and killed the customers bandwidth. like whenever the neighbor turned on the TV the internet just went night night
yeah my building has like 24 apartments. not even talking about the complex which i feel is over hundred
i was already planning on moving because i just got married, but damn
had a buddy suggest running a VPN to check if they were throttling but no change there either. and when i happens i would take my router off the modem and just hook my one PC to the cable modem
uh hey guys, do you think there might be some way to decrease these ping spikes and timeouts?
i've contacted my ISP already and he doesnt seem to care a whole lot about this.
This keeps disconnecting me from multiplayer games
Welp, the council don't consider the ups to be an issue
4 times in 4 weeks it's died and took half the council's network with it
Roll on 5 for 5 
kind of sounds like you have a lot of power outages
or is the ups just causing issues all together?
the ups is the issue
the batteries are like 15-20years old?
from what one of the guys on the network team said
What are good columns to put in excel for tracking IP addresses for several networks?
I currently have hostname, Description, IP, vlan and gateway.
Anything else I should put for columns?
I would probably use an IP management tool.
@green gazelle which one would you recommend that is free for business use?
Or does Microsoft have it built in?
Microsoft does have a built in one
IP address management (IPAM) is software that can plan, track, and manage the IP addresses used in a computer network.
Although IPAM is a way of managing network addressing, it does not typically provide Domain Name System (DNS) and Dynamic Host Configuration Protocol (DHCP)...
if your unix savy there are some good web based tools, phpIPAM is one of them
Post-It notes on your monitor!
great way to keep track of passwords too.
under the key board!
Lots of people online
Everyone is on the line

@rocky badge you're on the line?
yes
It is good to be on the line with friend but for now I must get off the line
rip
Sup :)
I am moving my home's router to the attic right above my room, I was wondering are there ethernet bonding devices out there still? Would it be worth it to buy a dual RJ-45 port pcie adapter to run bonded internet at an effective x2 speed?
@proper veldt Does the speed of your home internet exceed the speed of ethernet (1000 mbps)
adding more wiring won't necessarily get you faster internet, and I doubt you're getting 10 gbps to the home
DD-WRT or Open WRT / LEDE ?
Preferences & Why lol.
Conversation Starter
I too would choose PfSense or UBNT hardware if you want full control, but otherwise I use Advanced Tomato (Tomato WRT) on my routers, or I throw the routers in the garbage and replace them with routers that can run such firmware.
@thick minnow looks like you didn't start a conversation
@orchid kraken I get around 350 mbps on ookla Speedtest
you won't see benefits from using more ethernet connections
even wireless ac is fine
unless of course you're on an ancient 10/100 ethernet controller, then sure.
Thanks
Or for talking to other computers in your house but then they both need 2 ports
@thick minnow I go with OpenWRT. It does not matter a look but I find OpenWRT looks nicer and there are more features in the gui before you have to log into the cli.
But as others said, if you can, it should be replaced with something that can run better stuff. I hate pfsense so I could not use that but VyOS, pure linux, routerOS, that kind of thing are good
Anyone has check wifiman from ubiquiti yet ?
https://itunes.apple.com/app/id1385561119 (pretty neat tbh)
yeah
There is always someone like that. Those people usually are fine with HDD load times π
lol, I just put a bunch of drives in RAID cuz 8TB SSDs don't exist >.>
Sadly
8x8TB in RAID 10 iirc so the speeds are pretty good. About 4 to 5Gb/s read and write
I do have a 2x 1tb raid 1 SSD cache.
π
π
also didn't you say that pfsense cant handle more like 1 Gbps or something?
considering they have that new 5 gbps connection or something like that..
IX stands for?
Anyone know a way to get a hold of colton for a networking/sale/sponsorship related question.
what's the point of having the internal connection of 10 gbps and the outdoor one of 5.5 gbps
ohhh ok ok
i got it
768.56 mbps?
too low.
must be at least 10g
wtf
how much bandwidth you have to share to people xD
oh come on now
@ancient vigil I have an idea for a project that would include DBrand, Sony and PixelOpus. The thing is I have no current contections to those folks.
...
lol PfSense

sorry @uncut pendant mistype on my part, please forgive
ikr, they should be using D'Link

I usually dont have to deal with the routers right now its just a bunch of cisco 3850s
had outdated OS'es
@ancient vigil Huawei doesn't spy.
now a non biased answer?
@ancient vigil ExtremeNetworks
in my free time i struggle to make a VPN and you search for backdoors wtf
it was working then it stopped
that's called you fucked up
And Extreme networks can be a pain
and my carrier apparently blocks PPTP protocol
......I think I made another mistake....this chat seems to be about Digital Networking....and I had assumed it was about Social Networking...faceplam
it was working. i turned off the server, tried to connect from the outside the next day and it stopped working
@honest rain lol
it's just a beginner test
Just a couple of ports
Hi guys
Hai
@mighty wind my school insists on Extreme Networks
400 gbps? xD
"Cisco is too expensive, Aruba---uhhh" etc
The big fuck up we had recently was the cisco guy had us buy multimode SFP+ modules and single mode fiber.
twas not happy
yes
it may be the switches we have i dont know how new they are
100G switches
lol
moist
And good price
we have a couple of these at school https://linusdrop.tips/0eTYjb5lDf.png
Better priced than cisco
i know that purple
Lol that domain
lel
We mainly use extreme and cisco in our installs but that's because Disney likes extreme and Universal likes cisco
xD
We use Cisco routers and Extreme Networks
Extreme: switches, APs, NAC, etc
Cisco: routing
yes i said disney
But do you guys want some dc stuff some times in here?
I love it when the wireless controller commits die
I also love it when the circuit dies
Yes
@hallow nimbus I'm going all UniFi at home soon β’
Haha these switches are for speed ix
OOooh Nice @rocky badge
oh fuck you https://linusdrop.tips/wi7jtJJxQy.png
Time to upgrade that bitch @ancient vigil
We needed new ones other ones were full
also, rip controller https://linusdrop.tips/mci9xBZM9w.png
I bought 480 euros in harddrives π
@hallow nimbus it will also replace my switch and router
π
I can ask
Baller
lol
π
Now find a hardrive that can write so fast
Nice
π
https://i.redd.it/h20ndtrko1521.jpg @hallow nimbus
Linus schoud do more network videos
that doesn't look like a 40 cal to me
But it is funny
"We don't need these VLANs, deleting them should do no harm"
Jake: "I CAN'T ACCESS ANYTHING" caps caps caps caps
I dont like jake

Whams
And that rack
As a DC engineer
I cry every time
I mean his server are not that bad
I like whams
Did you look at thier bios ?
Aruba networks is the best network
Hpe is fine
But ther server ls are heavy
For a 1u
Btw
Does someone us windows build in raid?
Its slow
@toxic quartz Linus used to use it
orange on orange
https://linusdrop.tips/r9wretsl78.png
3 2TB drives
hw raid > sw raid
Yeah but i dont have a lot of knowledge about raid cardz yet
I have 32GB of ram
Single socket cpu
π
I have 4 cores loo
Lol
Yeah, but i dont have the knowledge
For hw raid
Disk management
All hard drives
I have no ssd :(
I will check tomorrow
If its done
Yes
Why?:p
Also dutch?
Netjes
Je mag geen nl praten hier
Haha
Hahaha
Whut
I got censord
For the word por n
Try it
Gets blocked
Nice
I need to go
Catch some sleep
Bye
IDK if I should ask this here but my dorm internet requires me to use a proxy and that now I want to try to play a little bit of old Minecraft but my proxy seems to be blocking the minecraft servers so I can't connect. Would there be any solution for me to connect?
Right so I have a Windows laptop with shit wifi what do I do
It's an HP ProBook 455 G3
How ProBook g3 455
@ancient vigil What are you using those SM843T for?
@ashen bobcat That there is. But you'll need to set up a VPN.
Either use a VPN service set up by a third party (as close to you as possible for latency reasons), or one set up by yourself if other options don't suit your needs.
Get a AWS account, make a t2.micro openvpn server and you got a free vpn for a year π
Renew that everyyear with a new card number π¬
Ah too bad I don't have any way of doing any type.of online payments. Thanks still
My free tier's long gone.
lel
I switched to Azure, They kept trying to extract money out of me and made me hate their platform, and AWS offered me $40 worth of extra credit.
I pay for 1gbit
@pseudo blade Azure 
You know, their free tier convinced me to never use their platform again if I can help it.
I mainly use Google Cloud
If you're going to offer users a free tier, you want to make sure they have an excellent experience.
Because otherwise you've wasted money and user trust trying to be greedy and extract money for free-tier items.
I'll switch again to Gcloud when my AWS credit runs out.
I like Google Cloud
I'm content to let them pay for my bot and website hosting until I run out of cloud providers :P
lol
AWS have made their money back and then some from me implementing stuff using their cloud for other people.
Azure have made a few cents and a strong critic.
one thing I like about Google Cloud is that they actually respond to tickets quickly for non paying customers
Plus their dashboard makes it hard to get important data in a meaningful format.
Oh, absolutely. The whole point of having a free tier is that you're selling them on your entire platform.
AWS free support sucks.
That said: I have only dealt with AWS support to increase limits.
Had Cat6 wired into my house today. Feels good man. Thanks to those who helped me out with some info.
AWS took like a week to respond for a quota increase request for SNS.
kek
It's funny, because quota increase support tickets are tagged, so they knew I wanted to give them more money...
ikr
@serene elm Looks consistent. How does your PC connect to the router, what is the router?
I'm kinda looking forward to messing about with Gcloud, though their terms of service suck ass compared to AWS.
The router is an ASUS AC-5300 and I'm using CAT 6 ethernet to my computer, everything is 1gbit capable
Your router isn't capable of handling a gigabit connection.
Should do more than 200mbps, though.
What's the modem?
@serene elm
let me check, all I know is that it is a Rogers modem and it can handle 1gbit
i dont know if im right here but pi-hole should work on a hyper-v server with the windows hosting it right
@ancient fulcrum the VM has to be Debian based
otherwise, you're good
my Pi Hole runs on a Debian VM
i have it on raspberry debian
its starting up when my pc starts
so i just apply it to my pc first
I finally got it to work! I no longer have to run a 100ft ethernet cable through my house in order to get good speeds! I split the cable and internet connection and then ran the modem through one of the split channels and I am getting the same speeds as before!
hi guys
hello
noticed
why i cant send screenshots lol

y u no programmatic it?
ah, that makes it tough
You forgot to insert Huawei joke here π
So shuffling between the MX and the CE I assume?
Sounds like a good way to spend the weekend
And then receive angry "why" responses back π
That's good, there is always that one it seems that doesn't like having to reconfigure something
"Why do I have to learn VxLAN, why can't we stick to spanning tree?!" π
Never really messed with IS-IS, mainly OSPF for me
Drinking from a fire hose is the best way to learn imo
Yah, that's always a nice feeling looking back just a little bit and seeing how far you've come
ah, so not like an SD-WAN deployment or SD-Access or anything?
Yah, that stuff can be tricky even for servers. Got to make sure you error check properly and validate configs and stuff
Yup, corner cases ftw π
Do you take more time to write the script or just do it manually
Yah
In that case it makes even less sense to automate it
That's a pretty nice resume builder there π
Nice
lol
Is that 100G single or multi mode fiber? π
Good
Easier path to 400G down the line then
lol
ooof, hopefully you're not stuck too much longer then
Yah, knock out the easy stuff first and then circle back
lol, probably for the best. After midnight the network begins to talk back
All your networking equipment will run faster if you let Linus drop it 1 time
no router bgp
lol
no feature bgp
wr erase
reload
y
No. They will forget to configure subnet
I guarantee you there will be: NO security, NO VLANs, and NO actual/logical explanation
π
The most secure network is when you shutdown all the interfaces
I want to put forth a nomination that LTT be in charge of all top level DNS servers for the Internet. Will someone 2nd the motion?
that would end badly
All in favor Type AYE
admin
config
commit replace
format disk0:
reload
XD
I think they are just doing static routing
If Linus configured BGP, half the internet would go down due to a config issue
LTT is the default gateway now π
commit π
lmfao
Let me hook up my spirent and I'll add a few >.>
Needs more host routes, and that /31 is looking a bit lonely
Who did Linus say provided them their internet 
Were getting 10 gigabit INTERNET installed at the office! But we need to do some housekeeping first in order to use it, and it turns out we suck at networking... Buy SuperMicro Servers: https://lmg.gg/8KV6Q
Nothing
Hi
can go wrong
`First, that pfsense box will not be able to push 10gig. On top end hardware with pure routing, no ACLs, firewall just permit any any you might be able to push 8-9gig before it gets crippled. Forget trying to run any other services on the box as well. You do have plenty of headroom for 5gig though.
`
someone already pointed out that pfsense won't do the 10 gig lol
Question
Pick up a couple 32x100G cards and slap them in there π
`Not elitist, 100% correct. They need to hire a network engineer; and let him make some videos on this stuff.
`
What do you guys think about smart devices?
lol
Get him an ASR9922 >.>
someone suggested Fortinet
Fortinet i dont like
a lot of people are saying: get a better router ie Cisco, and hire a professional
North korean internet
π
LOL
They need just about any proper enterprise router at this point
They are A+B+C+D certified π
You know
we can't adopt our switch
Linus schould hire a network guy
YES
3 hours ago, Solkre said: They need to hire a network engineer were you not paying attention.... they had johnny...he retired.
Buy all the Cisco
π
Networking is the third off topic channel π
Worth it?
I would say so
But is it 5 euro per channel?
yes @toxic quartz
That i dont like haha
I wonder
But back to linus and network
How is the fuck the school network working
Lol, I always hope someone gets fired over those testing creds getting left in
it goes -> router -> VLAN -> ContenKeeper -> then the ISP
There is a bug, not public I don't think, that mentions if you turn a Nexus 7000 upside down it could catch fire >.>
like, wtf
I dont get it haha
LOL wat lurick
and why the fuck does it keep hoping to 172.22x. IPs
Linus could find a way π
It's fine ~linus 2019
172.22.x.x is still private IP range....
why are there 3 hops
Lmao
loool
It's fine, it's SSD
π
@ancient vigil https://twitter.com/Ayyylias/status/1074246401779998720
Ban
No 25
20
Pls
π
XD
I don't think anyone at my school is Cisco certified 
I don't even think they configured the router
which is good
because if they did
it would be FUCKED TO HELL
Who would do the fucking all the way down to hell 
Chaos theory?
it seems as if each REGION of the school ahs their own subnet
Dell server?
EXTREME NETWORKS why does my school use them reee
Can't be Huawei, no sticker with "Not spy chip, don't touch"
I give you one tip
π
Look at the psu
@ancient vigil Did you just pull a linus here https://twitter.com/Ayyylias/status/994172609087655942
super micro
Its on ur twitter
Starts with a f
So it was you
lol
Fujitsu
Fujitsu 
No, its a ww2 server
Lmao
π
we put guests on another subnet
GG school
but that can access the main subnet
Who needs ACLs or anything like that
172.16.0.0/12 can access 10.0.0.0/8
LMAO
10.0.0.0/8 may or may not hold private info
also
their captive portal IS MAJORLY fucked
@rocky badge stop showing the school where they screwed up
after registering your device, it's supposed to go to the school website: ie http://myschool.net
but it goes to http://http//myschool.net
lol
Ew
X-Powered-By: ASP.NET
X-Powered-By: ARR/2.5
X-Powered-By: ASP.NET
MicrosoftOfficeWebServer: 5.0_Pub
Server: Microsoft-IIS/7.5
Last-Modified: Mon, 03 Dec 2012 17:06:35 GMT

the archived website Last-Modified: Sun, 04 Jun 2006 21:50:08 GMT
But you are young AF @rocky badge
an image on the archive
school website
what is bootstrap
what is mobile friendly
π
Oef
it's using jQuery 1.8.3
I need to go, catch some sleep
cya
Seeya guys
π
owo
When your server gets put under investigation for having Tsunami and Nenavist binaries so they compaire them both
Had to fucking brick my server
@ancient vigil I'll gladly take those dropped servers π
I like the Dell R620/630 myself
They are crazy quiet for the most part compared to other servers although I do like the UCS series as well, Hyperflex is a beast π
Ah, haven't touched the newer generations, I think the last one I had was a G3 or G4
Free those IPs π
Wow, that's a lot
i know they are great but underpowerd compared to the storinator
lol, whoops
Gotta press 1 extra key owo
ouch
That's one thing I like about NX-OS, it will still allow you to tab out names regardless of case π
But that's all data center stuff, I don't think IOS-XR will let you tab if the case is wrong at the start
They don't need no interwebs, just move it
"Whoops, the fiber had some EMI and you lost some packets" >.>
XD
π

Haha, yah
We had a vPC failure (or whatever the Juniper/Huawei equiv is) and you just swapped to the other box
You're in a DC now >.>
I mean the customers, since that's where you do vPC π
lol, hopefully it doesn't go boom
yah, memory leak boom
π
What tool is that?
Custom?
Ah
Ah, that's a Juniper app
or just integrates with Juniper
Ah, gotcha, couldn't read the print under the title so wasn't 100% sure
SNMP is the devil π

I prefer telemetry, the switch should tell you when something is wrong, not "I have to poll the switch"
But SNMP is pretty widely used still so we gotta deal with it π
Some of my monitoring is the device pushing to the server and some is the server polling the device
SNMPv2c or v3 is better, I hope you're not using SNMPv1 π
I've also found a few memory leaks over the years just from SNMP polling the boxes
I think on unifi, the device pushes to the server π€
Because there's an inform URL
yourcontroller.tld:8080/inform
Oooo, nice
Curse you and your /48
I have to do some weird bullcrap to get more than a /64 from my ISP, and only in /64 blocks too. The morons will not let me request anything larger like a /56 or /48
You're on Spectrum, you can req for a /56 if you want
Nice
PRTG doesn't get that fancy without paying more money π
And it was tough enough to convince the account team we needed just PRTG to being with
My favorite lines
"What do you mean a free tool won't let you poll devices constantly"
or
"Why can't you just use something free"
If I could I would 
Yah
Pretty cheap compared to PRTG too


Lol, Observium will detect all my servers at home except for one. Two identical configs but can't poll one of them
Dunno, same SNMP config on both and one is polled, the other not
Weird shitz
yup
Yup, just installed it at home
I would need the next step up for at work since that would give us everything but priority support basically
but PRTG is crazy expensive, we've got thousands of sensors so we'd need their XL edition which is like $25K/3 years
nice
Is the traffic map a plugin as well @ancient vigil
Installed it just now π
hey guys quick question i have dsl with 50mbits/s and i have lte in my area is it possible to have windows use both my connected phone for lte and my dsl for donwloading stuff?
No, you can't split downloads like that
thats sadness pure
@kind hornet 50 down is still fast relax
not realy at my pc i get like 3-5 mb down
Then there is a problem on your pc
nope the 50 is in mbits note bytes
if you pay for 50 then you need to call your ISP
Downloading via what? Steam?
^
XD idk in the first post i wrote 50 mbts wich in mb is about 3-5 some wehre around that
I have 150 mbps down but Comcast nerfs the heck out of the upload speed to 2 mbps
LOL
lol rip
Only costs the soul of three children and the signing over of your first born to get it
I have 200/10 from Spectrum
It doesn't make sense if you ask me because the provided modems they gave are capable docsis 3.1 to give more upload
well i could get 10times waht i have currently but i would need to switch provider and it would ocst 100 bucks more
I have 1Gbs/30Mbs
Fuck you hexi Give me some bits
It's not like they can say "sorry docsis 3.0 limitations"
Lol
It's gone!
they can say "it's our infra."
but then people will be like: "So what are you doing with money you get to 'upgrade' your infra"
Ikr
the bottelneck for my connection is my house only there some good glass calbes in the street but my Houseowner( vermieter ger) just graps our money
They raised fees this year again for me
$20 more dollars
In fees
Adapter price went up, broadcasts fee is up
They must have some bad negotiators
And then they go to the government and ask for tax breaks and more money
If they can't cut a good contract deal
My home VPN sucks because Spectrum has shit upload
They need asktrim π
@kind hornet Honestly depending on who your provider is now and who you would have to switch to, it may be worth the extra $100
Thank you for reaching out to the office of Tom Karinshak. My name is <redacted> and I will be addressing your concerns. I understand that you would appreciate a higher upload speed in your area.
Upload speeds still account for only a fraction of all Internet traffic (approximately 7%) in the average home, and everyday Internet usage - social media, email, etc. - does not benefit from a faster upstream.
Higher upload speeds are generally needed for bulkier traffic, or traffic with unusually time-sensitive/latency-sensitive responses, such as:
Streaming live video from your webcam
Online gaming that requires extremely low latency 'twitch' responses
The benefits of higher upload speeds depend on connectivity activities. Items that generally do not require a faster (or symmetrical) upstream signal path:
Composing and sending email
Talking over a VoIP connection
Posting to social media
Listening to music
Watching Internet-sourced video (Netflix, YouTube, Hulu, Amazon, XFINITY Stream, etc.)
Sending calendar invites/performing calendar activities
Communicating over the Internet (Skype, WhatsApp, Facetime)
Using an Internet-connected map to find a destination while moving (e.g. Google maps)
Downloading apps
Playing/executing apps
Checking live weather radar
Internet shopping
Playing 'parlor' styled games (word puzzles, solitaire, etc.)
Conducting maintenance/running utilities on connected devices
Editing stored video
Participating in webinars, webcasts, and conference calls
Actual demand or need for the service is limited. While symmetry of speeds is on Comcast's and the industry's roadmap, the benefits of higher upload speeds depend on the connectivity activities, and still currently only account for only a fraction of all Internet traffic.
they sent me this email when I asked them about stingy upload speeds and why they wont increase them
yes
@thorny herald its not even internet at that point
@bold karma well my mother uses the tv set from our current one and she doesnt want to switch the tv provider so we would only switch the internet and idk if tahts even possible or the other possebility would be to have the other provider additionally to our current one but idk if tahts possible
No, you will pwn the internet with them speeds @thorny herald
Why is upload working properly then?
Is something downloading in the background?
No
It was also at 3am when everyone is sleeping
and we have a fiber to the home connection
@kind hornet who do you currently have?
well i live in switzerland and i have sunrise atm but cabelcom( ups) would be the faster one
#youdontknow
who pays the bill? you or your mother?
30% me 70% mother because i only use my phone and the internet and she want to keep the tv her phone and the houseline so thats why the share
that's fair
and she sayd if i want faster internet i would pay it myself
but i dont know if its even possible
and i dont wanne risk it XD
so you could call cablecom and ask if they could install a line for just the internet. explain the whole thing to them....see if they can work with you....talking to them doesn't commit you to them.
then if they can, you can cancel the internet with the current company
i live in the US
do you have the possebility to use the google one?
XD thats not nice
right...and other ISPs are lobbying against Google to expand their fiber
the funny think is i was thinking about getting me the dishes that linus showed of because the house next street has glass fiber
Luckily for me my ISP finally rolled it's gigabit service out to my area
nice but you probebly pay for it or is it acepteble?
$109/month for the first 2 years
plus I pay $40/month for unlimited data, otherwise the $109 only allows 1 TB of data transfer
lol i hope that with file limit never comes back to my country
the last 2 months i used nearly 5TB
well i use like 20 tb per month heavy 4k streaming and so one XD
yeah, streaming eats the data
two tv's streaming from amazon and netflix pretty much 24/7, plus all my downloads pretty much 24/7
I put a hit on the data for sure
I need to go make some lunch now though
ok bye
At least go mGig, lol
lol
hi
Uptime: 103d 9h 52m 16s That's probably the best uptime I have seen in a while
@ancient vigil All the DL100 series kind of sucks, don't even know why it exists. It's not like DL300 is that much more.
Do you want to do VM or hardware?
Edge Router or something from Ubiquiti?
If you want a dedicated box then pfSense then that might be the way to go. Other options though if you're fine with VMs on shared hardware then might be a virtual firewall appliance from (insert network vendor here).
I'm thinking about upgrading my connection to 300 Mb. My ISP also offers 1 Gb, but you think I will notice a difference between 300 Mb and 1 Gb aside from benchmarking the connection with a speed test? I live alone so it's not like I share my connection with anyone.
Downloading stuff uploading to locations outside of ur house
depends, is it also 300Mbps upload?
and what is the difference in price between the 2?
hi
hey
some have some skills in observium?
i can't add one server
all other ones are fine except one server
π¦
What kind of server?
my server in DC
Ubuntu? Windows?
Windows
server 2016, i added the SNMP service allready
and its connected to my VPN
wtf is this salt fiber thing they offer in switzerland?
ah yea baby they finally completed the cut over to the new core router, dropped my ping to 2ms
@ancient vigil
Check out SecureCRT π
But does it give you the option to use colors on specific words?
can highlight specific words with different colors π
EEEWWW white theme
That colored text is pretty nice though
Jezus elias it laggs
lol
whut
ok
reboot
is all good now? π
Then fuck the switch
I also have one problem
Observium problem
Nice
LOL
I dont get it
Nice
Correct
*incorrect
Two identical phones, running the same app, signed into the same account, on the same wifi network. One phone works and shows info from the app, the other says "disconnected"..... 1.21 gigawats.jpg
I have the most annoying issue with my ERX
Random 5-10min downtime multiple times a day
Iβll probably replace it with a Mikrotik
If I can figure out how to buy one
What if I upgrade to a faster speed and I get so addicted to the Internet that I rarely leave the house!
Oh wait, that already happened
π
Boohoo poor elias
@ancient vigil just go for it!
π
No idea....
I think I am going to replace my ERX with something that is not randomly giving me 5m downtime
Probably a Mikrotik but a few people have tried to convince me to go with a Juniper
Pfsense is calling, my son
I like my Mikrotik stuff, and I find the software less pretty but way more powerful and useful than Unifi's, but I'm expecting RouterOS 7 will literally never arrive (they promised way too much they can't deliver on for v7, and they won't update their kernel for new features on a minor version)
Still the best in its price range IMO for their sub-$200 stuff, not so sold on their CCRs.
@forest ice I will never use pfsense again, I have had no end of problems with it. You canβt even turn off the firewall without turning off NAT too and for some reason allow all rules donβt always work and I will see stuff being blocked by non-existant rules. The IPSec implementation will not make a connection with most other vendors. Itβs also way too GUI focused but Iβm a CLI guy. Donβt get me started on the BGP issues.
@ancient vigil most of my personal routers are pure Linux so itβs not much of a stretch. Iβm still not sure itβs the right option but Iβve been recommended it.
@fresh copper pfsense works you just need to understand firewall, interface assignments and the fact that NAT does NOT need to be in Firewall rules. There was an option to prevent that
Research and read the manual if something isn't making sense because it is stated there
There is selective NAT in case you don't want all interfaces to be NAT'd
Hmm, I wonder what's wrong with that Edgerouter X though. I haven't had any issues with my Edgerouter 4. Had a lot of restart issues with a USG Pro though (Refunded that for an ER4)
But yeah, I'm playing with Juniper and it's quite something different compared to cisco for committing
@little schooner so I had PfSense before. All I wanted was to turn off the firewall. Donβt worry about NAT at the moment as I was not using it at the time but I was planning on it so I couldnβt use the feature that lets you turn off both NAT and the Firewall.
So I start by turning off filtering of RFC1918/Bogons/Link-Local etc. because I needed them. Then on every interface (I had many because of lots of GRE links and the like) I put an allow all firewall rule. Traffic was still being blocked.
I realized that this was because some of the traffic I was routing was going a different direction forward and backward and PfSense firewall allow all rules actually donβt allow tcp packets in a connection it has not seen the start of. So I have to go into each allow all rule and open up the advanced section to allow any part of a connection and a bunch of other stuff and make sloppy state tracking.
Even then, it still blocks packets, I look in the log and see what rule it says it is blocking it from, oh, that number does not even correspond to any rule that exists. It takes a bunch of forcing it to save to get it to actually allow all and it still would sometimes block stuff for no reason. I know about selective NAT and I have used it before and it works great.
Iβve read the manual, looked up things online, and done basically everything I could. I am doing all the things right.
As for NAT. I know itβs not to be done as a firewall rule, itβs got a separate tab with separate options and I have actually not had any trouble getting NAT to work. The thing that I donβt like, there is an option to turn off the packet filter and turn it into routed mode over firewall mode, but that disables NAT as well which I donβt want.
BGP is really annoying. So I start with FRR which seems reasonable. All of itβs options are named differently than the standard way bird and others name them but thatβs just FRR. I get it working, then I find that it wonβt export routes to the kernel routing table. I read and look up and try everything but nothing works. I give up and switch to OpenBGPD which is easier but has a really bad interface. I was trying to figure out why I could not get IPv6 to work, turned out that you can only specify one listening address so you could only listen on IPv4 or IPv6. The only way around this is to edit the text config file where it does not tell you if you did something wrong, it just wonβt work and you will have to go to a log file and see what line the error is on and what the cryptic error is. Basically all errors are rather cryptic.
There is basically nothing in the manual about BGP or any of related issues. I do read the manual. I do google things, thatβs how I for to my current knowledge level. But if no one knows the. You have to spend why too long figuring something out that just works on other platforms.
When you save a panel, it saves everything in that panel. This means it slows down a lot if you have too many interfaces or especially IPSec configurations. It would sometimes take 15 minutes to save the IPSec panel after changing one thing.
PfSense does not just work. It may be fine for a simple setup but anything more complex breaks down.
Sorry for the long message, PfSense makes me angry
OH JEZUS thats a long ass story
I didnβt use PfSense for 5 minutes and give up. I used it for months of anger. I then switched to VyOS which is still not great but was way better. That specific router is now just generic Linux and works great.
@gritty owl I donβt know. Originally I thought it was faulty but then my home one does the same thing though it bothers me less. Iβll still contact UBNT and ask them what they think
Hello
Macro all the things!
Weeooo weeooo weeoo! We got a clicker over here boys!
You need to macro your spells to the keyboard like a proper warrior for maximum DPS!
All the DPS is needed to down the boss of life π
Heh. Macros. Just automate the delivery also based on what you're connecting to.
Hours wasted on device detection for likely a few seconds saved per device. Completely sensible for AWS, maybe not for you, but oh well :P
Who needs macros when you can just type scripts into your terminal emulator
There is even a built in ssh-copy-id that works well on linux systems and then fails on anything else
I'm updating esxi system now. Wish me luck hoping it returns
It was 2 years behind in updates
Ah, I'm scared for when I have to do that on my server
Yeah I don't even know what will happen next lol
I see output saying it was successful and calls for a reboot
This is a production system too
This is on just one host or many?
Someone was either incredibly bored or incredibly stoned when they wrote this book
Also gag windows home server
i need to be high for this to be entertaining
π
Hello guys
Heyo
Nice
Needs another raritan PDU π
Nice
sponsored by HP haha
I hate the white racks
Makes me dizzy
In our second DC we have white ones
In combination with white floor it makes me dizzy
In the DC where i work we have nice black ones
Linus schould visit us haha
Most people haven't π
He is welcome
I will give him some discount for floatplane
If he want to host in NL
Or the cisco video
Yeah
He visited cisco a while back
That was boring, even for me :(
A couple lab racks and an AP
EWWWWW!!!!!! Devil company!
Also, have some server pics π
Lab infra I built
Btw we are the only people talking in here haha
more servers
Route manipulation, so fun π
I'd rather see Mellanox over them >.>
To bad i dont have the knowledge haha
lol, caps π
I can do that π
I can do a dozen if I want to
But yes, bulk configs and split config windows is nice
Make them pretty π
Not like that evil cable I still have to change in my pic >.>
Just buy it, the more you buy the more you save π
Extreme networks XD
No hahah
No adblocker?
I used to mess with computers when I was in the lab. Flip the screen, invert the controls, invert the colors, change the desktop, lock it, etc.
Iβm half considering running a hypervisor on my laptop
Why?
My laptop has the specs to support one. It would require writing some drivers but eh
I have a gaming monitor
Only 2 monitors?
At work haha
Some ISP guy just came to the door trying to sell me on TV service. The look of sadness on his face when I said I didn't watch TV and my internet was fine XD


