#cars
1 messages Β· Page 310 of 1
when someone disses Toyota Corolla to your face
what you guys think of da whip?
that shit is sick af
It's fine
Looks fine to me
Yeah

^ I hope they'll make it, 400hp 
Although they should also offer the Hybrid4 drivetrain with 300hp, not only the Hybrid (225)
tbh the new Peugeots are pretty pretty at front
Π’ΡΡΠ±ΠΎ ΡΡΠ°ΠΊΡΠΎΡ Π΄Π»Ρ Π΄ΡΠΈΡΡΠ° (JDMΡΠΈΠΊΠΈ ΠΎΡΠ΄ΡΡ
Π°ΡΡ!!!)
ΠΡΠΈΡΡΠ½ΠΎΠ³ΠΎ ΠΏΡΠΎΡΠΌΠΎΡΡΠ°!

so uhm
just wanna shoutout that tractor, its swedish and from my island (Gotland)
not russian, so yall dont get any misconseptions from the video name
And he passed away in 2017 peacefully in his home
volvo 940 engine and 240 trans if yall are curious
Oof
ye olden parking lot oil change
oof I'd have just waited til I got home
He might live at an appartment
oh true
in which case, most likely has to do parking lot changes
I am home lol
I might redo the compression test on the rear rotor in the RX-7 later. I noticed when playing back my video in slow mo, that the psi looked kinda low. But I have zero issues hot starting.
I don't think I purged the housings before I tested, so that very well could be affecting my results
idk if my engine is messed up
I'm going to compression test the Prius when it gets to 105k miles
we'll see what its at, hopefully the cylinder with shit in it is still pretty close to spec
didn't you drop the motor and do HG?
https://www.autocar.co.uk/sites/autocar.co.uk/files/styles/gallery_slide/public/ford-modneo-estate-rt-2015-11.jpg?itok=r6LTI6ta
I prefer the European Fusion/Mondeo gauge cluster tho (although the Hybrid gets the US cluster)
AH that looks 100% like the EU Mondeo cluster
First off, I take no credit for discovering this. DanMc85 over on 2GFusions found all this info out. I am just spreading the word!
Check out his write-up (here) for his great explanation and details on part numbers that are. He also offers programming services. Iβll gladly ...
Suprisingly easy
althought thats for sport
but pretty similar
Probably ez since it can come from the factory with the MKZ cluster xD
Much better than the US Fusion standard gauge cluster
^ yeah true, but I also meant it since European Fusions got it as standard 
Yes
lol
π
I want to trade my fusion in for a sport
Sport has a 2.7 EcoBoost iirc , or am I mistaken?
2.7TT

Racing my 2017 Ford Fusion Sport against an M3, Camaro SS and 02 Mustang GT. My stock Fusion Sport ran a best of 13.5 @ 99.91mph Ecoboost
that camaro driver is garbage too lol
That or the European 1.0 EcoBoost π€
Difficult decision
Yeah that Camaro driver can't launch lol
Shorter wires = less loss
@indigo coral
No. HG hasn't been done yet. The results of the compression test will tell me how soon I should get it done
Inb4 cylinders 2 and 3 have 0 comp
oof
It'd be 1 and 2 or just 2
2 was the one with the fucked spark plug, but it's possible one chunk hopped into 1 when I was blowing the shit out of 2
I don't think there's any in 1, but there's definitely some in 2
@eager kite don't get me wrong, but all my wiring looks like that
@civic girder yes
lmao
I'd say a good 70% of my RX-7 has sleeving on the wiring
and the Prius is 100% sleeved
@eager kite All wires exposed to the elements/visible/reachable from the underside, yes
like, when a cheapo 80s sports car has sleeved wiring, then any modern car without sleeved wiring is just lazy
For the RX-7, pretty much all of the engine bay wiring is sleeved along with anything that might also be exposed to the elements in other areas
most of the internal wiring isn't fully sleeved, but its mostly covered up by carpet and panels anyways
Yeah true, that's basically how it is on every modern car: outside fully sleeved, inside covered up by carpet/panels/...
I think the main chassis harness is sleeved, but most of the internal wiring that comes off that harness is not sleeved. If a branching off wire has to go outside, then it will be sleeved on the outside.
Just changed the spark plugs on my grandfather's 1999 Buick Regal GS
It's a a transversely mounted V6, so you have to take the front engine mounts off and winch the whole engine forward about 8 inches
Do they go zap-zoop now?
Yes
The car runs excellently
It didn't help that the plug boots were glued to the plugs
Well...
It's my father's car now
My grandfather passed away in September
But we will always call it "Grandpa's car"
The car is really clean too
It has 150,000 miles, but it was garage kept
So there's basically no scratches
And the clear coat is in good condition
It's the supercharged version of the 3.8l V6, so it's fast and reliable
Can we talk about how stupid e-dipsticks are?
Friend actually knows how to check his oil now.
Merc's E-dipstick is annoying cause it requires the car to be stone cold
So when I do an oil change and start the engine to allow the oil to circulate
I can't check the oil level until I wait 30 mins
That's stupid.
So you basically do the oil change with the normal requirement that the engine takes.
And then you have to top it off in the morning.
Basically
It's annoying to check the oil level in my truck as well.
So it wants 8 quarts, so I add 7.5 then start the engine
the wait for like an hour
then check the level and add more
Since it wants the truck to be brought up to operating temp, and then stand for like an hour.
that's pretty bad too
BMW's E dipstick just requires you to be on flat ground and for the engine to be warm and on
See that's fine
My car just wants me to be on flat ground, and to have been off for like 5 minutes.
You know, a normal dipstick.
So I just check my oil with every/every other fuel up.
So I check my oil level maybe 3 times a month.
Yup, I do mine every week
My dipstick is hovering around the halfway point right now.
Ah, BMW dipstick lines indicate a one quart difference
idk what that is in liters lol
Between min and max is 1 liter.
Yup
How's your E46 going?
Running alright. Will probably switch to summer tires next weekend.
Depending on how the temps are.
ah nice
Can't wait to have firmer sidewalls.
I should've gotten all my AC parts ready to go to do the conversion
ugh, oh well
Too poor currently anyways
My current summer tires are a bit tired. But they are still legal.
Will probably run them for this season, and then change them.
Mine are also fine. But I just don't like running on old tires.
fair
Example. My old winter tires had plenty of thread left.
But they were legit 10 years old.
Mine were the same but the tread cracked
from being stored outside in the summer heat
π€
Yeah - That's bad.
I'm thinking of getting a set of Michelin Pilot Sport 4 for my next set of tires.
Would probably cost me $500 to replace the four corners.
My summer tires are currently Michelin Primacy
Meaty
The X5 has some thicc tires.
thicc
That's a W209
TIL - The way that they filmed the Bugatti Chiron 0-400-0 km/h run was with another Chiron.
Wait a second, does that car have permission to drive on non-private-roads?
Wat is dat at de back?
@spark apex Camera and mount for when they filmed the 0-400-0 km/h run.
The driving shot in this video was filmed by the Chiron above. https://www.youtube.com/watch?v=PkkV1vLHUvQ
World record for the BUGATTI Chiron: the 1,500 PS super car has accelerated from a standing start to 400 km/h (249 mph) and braked back to a standstill in just 42 seconds (41.96). This is the fastest time ever reached and officially measured for this driving manoeuvre for a pr...
I just realized that the 0-400-0 km/h record that Koenigsegg has is a solid 10 second faster than what Bugatti did with the Chiron.
Anyone want me to get my friends car dirty? Lol
Yeah I'm waiting for Koenigsegg 300mph one :/
π Dutch plates π
@stoic ledge what?
he's Dutch
@median egret that ^
LTT Dutch Car Meet when
After corona xD
@fathom socket bold move with the unprotected oil cooler
pop ups win
This week we lab test the 2020 Honda CR-V Touring #Honda #HondaCRV #CRV
Follow Andie on Instagram for more pics of CR-V: https://www.instagram.com/andie_the_lab
Rear cargo accessories:
2019 Honda Passport: https://youtu.be/67RbfxIFP-A
Recent Vids:
2020 Infiniti QX50: https...
I remember Matt Farah having a modified Corvette C5.
Peek around Matt's whole garage on WheelWell!
https://www.wheelwell.com/profile/54a87c441b035a475a2f2d8c/garage
Matt finally pulls his Corvette out of winter hibernation with a new set of HRE FlowForm FF01 Wheels on Michelin Pilot Super Sport Tires! We do a full run down Lati...
I just realized.
For all of Honda's "radical move away from industry norms."
Their HVAC controls remain tied to the main screen.
For example in Toyota. There is a separate screen of sorts for the HVAC controls. Nothing will show up in nav screen.
I hate having HVAC on a screen. I want buttons or dials.
It's not just the issue of buttons or dials.
The entire interface should be independent of the infotainment.
Yeah
I never really cared for multi-zone climate control.
Here both knobs are for temperature on either side.
Single zone... other knob is for fan speed.
imo, preferable.
Otherwise... fan control isn't perfect.
cripes, one sec. Let me edit my pale af foot out
It's nice that some cars still have physical buttons/knobs for the climate control.
My favorite set up remains the 3 knob HVAC.
speed, position, and temp
It's truly eyes off.
My setup is alright in the fact it's automatic. So I just twist a knob and everything goes from there... so yay?
It's what a lot of cars used to do.
Honda, Ford, Toyota...
https://cars.usnews.com/static/images/Auto/izmo/i84883042/2019_toyota_corolla_tempcontrol.jpg okay... this actually also works.
Not knobs, but still eyes off.
I drove a bunch on a road that is known as an enthusiast driver's road with the truck. Was pretty fun.
That's the 'slow' speed section, the one on the East.
If you take read 257 to the West, then that's the high speed section
It's all 60/70 km/h roads.
Does the Model 3 have 12v socket? (a.k.a cigarette thing)
yes
@dense shard https://www.google.com/url?sa=i&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DUp_l3AJb1Zs&psig=AOvVaw2eyvV-zb5REpWXig8-A4Ax&ust=1586156970575000&source=images&cd=vfe&ved=0CAIQjRxqFwoTCICQs6jd0OgCFQAAAAAdAAAAABAS
My Trucks HVAC Controls
I never have to look at them, just set everything by feel
In this video I show you how to fix your max a/c blend door that is not engaging. This video is specific to 1992 to 1996 Ford F-150's. But this method is sim...
This is what mine looks like.
https://youtu.be/vadTPetmTlc mine makes cool noises
Oof xD
I never understoof those HVAC controls were the AC control is on the position switch... Like at norm AC, what vents is it using? Idk
And when I want AC on my feet? Or windows only, I just can't?
basically
I don't mind just the temperature display being on the screen as long as there's a hard dial to change it
MAX AC is basically recirc with AC.
The RX-7's HVAC controls are pretty easy to memorize
bottom slider: left for cold, right for hot
top slider: most of those settings don't do anything different from each other, somethings broke
and the dial for changing speed and turning off is also the a/c engage switch
mine's easy
the HVAC controls on the Prius are aids
hit the climate button and then fat finger buttons and hope the shitty touchscreen took the input
Corsa is manual (both transmission as HVAC xD), so very easy π
Left dial: temp
Middle dial: speed
Right dial: position
Left-left button: AC
Left-right button: recirculation
Right button: rear window defroster/heated mirrors
Tape deck 
Couldn't agree more
its all part of the experience to have tapes and not be able to see the stereo's display in the sun
and my god, its glorious to have all the speakers hooked up
instead of cranking the volume because you only have rear speakers its balanced and stereo
and audible over π ±οΈ rap
π ±οΈraaaaap
https://www.netcarshow.com/Toyota-Corolla_Sedan-2020-1280-4f.jpg I would have preferred this tbh.
But dual zone is a nifty feature.
Should have gotten a cheaper Corolla 
@indigo coral how old is it
Like 6 years old lol
oof
That's an acceptable age for a battery
my old BMW had a battery that was 10 years old. Still going strong when I gave the car to my brother
Guy said I need a new one when he looked the car over for an inspection. I asked why and he said because it was old
I asked if it was still producing the right voltage and he said yeah so I told him I didn't need a new one
My battery is 7 years old
Haha!
I have two of them
One of them is a helper battery
The main battery is less than a year old
Did I mention that it has the dual alternator package too?
My truck will literally jump a car that's battery is at 7 volts instantly
looks confused at the speedlimit sign
whats that π
It's a new scoreboard for the road
I have the record on my highway at 178 MPH
I sent this to my friend who's obsessed with BMW's

I drove my Camaro yesterday with drag slicks on
It was rainy
And it was absolute hell
that's gonna be a nope for me on that dog
@fathom socket Well its true, but BMW's is fixable untill like 2009ish unlike most other cars π
My BMW has been good
The only "issue" I had on my car that needed to be fixed was my radiator had blown up, it was slightly round instead of squared. Other than that its been holding up just fine in my ownership.
the only issue's I've had on the RX-7 have stemmed from the fact that the previous owner left it under a tree for 15 years
and the only issues I've had on the Prius have been due to operator error/shit breaking and making things worse in the process of fixing
No issues with my Toyota excluding that oil change from hell.
Also because it is brand new.
(It damn well better not have any problems.)
Otherwise I'm buying a mid 90s Dodge Ram with a Cummins and calling it a day.
almost 2 years now and the only work we've had to do is a valve cover gasket
No electronics, no tech, no break.
Okay... it is my dream to buy one of those unironically. I love the idea of having two vehicles that are complete opposites.
One is a teched out hatchback compact, the other is a bigass no tech work truck.
She bought it new in '97
nice!
Idea with the old Ram diesels is a generation or two... they were totally analog. Mechanical injectors.
My grandpa has a 2001 cummins that's been sitting for a long time
we occasionally go turn it on and let it run for a bit
... that's actually very close to what I'd want.
Well I'm too poor to even try to pretend to make an offer.
it's got some issues, soem dents in the tailgate and stuff due to a situation in the past
but mechanically its brand new
(besides flat spotted tires)
This would be a restoration job I'd say. The ones that survive aren't in great shape.
i bet those tires are hella screwed up
the seats are covered and brand new underneath, dash covered etc, its been sitting inside so its not full of mold or whatever
its not been sitting outside
so yeah it'd be preetty easy to restore I'd imagine
no rust
That truck sounds like a legit gem.
If I was searching for something like this now... I'd 100% compromise and get it in automatic.
yeah its auto
Doesn't even matter tbh.
I mean it's a pickup truck not a sports car
Well idea would be to stick to the theme of no tech simplicity.
its a durable auto, isn't it?
From what I've heard. yes
The people who have the million mile Rams do rebuild their transmissions every so often.
Like... every 350k or something stupid long.
yeah 350k isn't bad
90s truck that's being used as such? 100% fair.
I imagine you can DIY it.
Yea, that's why carbs are the best
they don't break
they can get dirty and clogged like injectors, but you just get a rebuild kit and throw that bitch on there
if your injectors get clogged to shit, then you're basically fucked
There are ways to clean injectors
yes
Just buy the appropriate fuel injector cleaner and you are set.
If it is worse, there are services that will clean them for you.
But port injectors are also fairly cheap to replace.
Stupid question: how easy is it to tune electric steering? I am wondering if it is easily possible to reduce assist from the motor to improve road feedback?
It depends on the car.
You might have more luck changing out the steering bushings or new tires.
Well those aren't the problem I know for sure; I even run 18's in the summer
I just feel the steering is too soft for my taste
hmmmm, I personally have never heard of anyone trying to retune their steering assist.
And changing the assist level might not give you more feedback or feel.
Modern steering is by nature more "refined" or rather isolated. It's what the consumer wanted, and it is what they got.
You can try to replace the steering rack mounting points with harder rubber?
I don't want to feel the vibration
just if the road curvature changes I want to feel it
My wife's lancer is amazing for that as it is still hydraulic
I don't think that will be possible.
Oh well
Like... I could be wrong. Worth asking the specific car community, but I haven't heard of this being a common thing anywhere.
happy monday
electric steering isn't connected to the steering rack afaik
I think there's some kind of sensor at the end of the steering column that tells the motor how much to turn the wheels
If you want to "feel" the road, get hydraulic power steering.
Or if you want to feel the real deal, get manual steering
Electric steering is still connected to the rack
just an electric motor is assisting it instead of a pump
Then you have Alfa that just has steer by wire with no connection π€
manual steering is kinda dangerous though isn't it?
Uh oh
Manual steering feels the same as hydraulic when driving
Its just heavy af when you get into slow speed situations
Hey I got both of mine too
Manual isn't dangerous, just very stiff at low speeds.
And when stationary, its like trying to turn the wheel in a car with hydro steering when the car is off
I think manual steering is really nice, it has more feedback and even at speed its a bit harder to turn
that slightly harder makes it feel like you're in control
you can feel the car's grip
I would totally run a manual rack if I didn't have to share the car with my family
They would all complain lmao
Yea, even though the Prius probably has similar handling limits to the RX-7, the hydraulic steering in the Prius makes it feel lame and boring
like, Prius is already pretty limp in terms of performance, but with a manual rack I'm sure cornering would actually be pretty fun
I'll never understand Scotty
good
In one video he says that the Chevy LS is the worst
Understanding him makes me worried for that person's state of mind.
About half a year later he makes a video talking about how the C6 Corvette is a really good buy and how the LS V8 is a really good engine
> Scotty
No thnx
yea, i'll pass
He's a crackpot mechanic with antiquated views
He's a boomer who pretends to be a mechanic
Just a complete idiot
He thinks diesels are unreliable
Just in general
My dad's 2002 Jetta TDI has 450k km on it and runs perfectly, burns no oil and gets like 4.8l/100km
He also thinks anything fast/fun is bad. Yes, a car like the G70 would he expensive to maintain, but it's also a hell of a lot more fun than a 90s Camry
I would want to see his reaction to the engine I want to build for my car
First of all, it's German. He wouldn't like that. He also wouldn't like the fact that I'm planning to put a turbo on it. Not to mention it's gonna have a tune.
Ah
I plan to get an OBD1 ABA and put a T3 turbo on it with a chip from Black Forest Industries
That's a Mk3 isn't it?
Yep
75hp 
90 actually
It's 90 crank from the factory but it's probably like 65 whp lol
My goal is somewhere around 220 whp
OOF
Whelp... guess the QC issues still aren't fixed on the Model 3.
Classic
theres always a bad batch somewhere
id hope that >95% only have minor issues or no issues at all
it was a lot lower percentage than that when they fist came around
Idea is the consumers get perfect cars 100% of the time.
Factory inspection, dealer inspection...
Badly aligned panels shouldn't make it past the dealer never mind the factory where the car is assembled.
every single automaker delivers shitty cars sometimes, except for maybe rolls royce and stuff, but tesla is the worst in terms of initial quality
body lines, shoddy interior work, etc
When it happens. The communities and customer are far less forgiving.
And at this point tesla can't use the "new automaker" excuse
they're not new anymore
For when they were struggling in 2012/13 with quality on the Model S, that was a fair argument. Now they can't use that anymore.
Mazda rotaries were high quality at the time
but they got a bad rap because the owners were not necessarily of the same quality
There is so many ways I can go with that
Any guy with knowledge here, caring to help me with an little issue?
Best way to get help is by posting the question, people who can help will answer π
So im pretty new to cars and its about my headlights.. dunno if thats a feature but currently if i turn on my lowbeams, my right headlights is lowbeam but my left light has only parking light.. if i enable highbeam, both light up normally
No, that's not normal
Your left low beam light is probably broken
Low beam and high beam are different bulbs
Ah it's H4
Well probably one string/wire/... In it broke
Ah filament, that's the word I was looking for
Hm. I guess time to change the bulb
Good luck have fun π
if i replace my old headlight bulbs with newer led ones will the brightness/visibility improve that much?
In most cases: pls don't. LEDs in reflector halogen headlights cause for a lot of distortion, dazzling oncoming drivers
It's labeled/marketed as a 6.3l but it's actually a 6.2l
It's an homage to the 300 SEL 6.3
GG Mercedes
lol
i miss my 2000 SLK230
tbf i never got to drive it because we got rid of it 2 days before i got my license but the car was my childhood
bro now iβm on a hunt to find one with our old colour but i canβt find one
i miss the thing
Basically everyone rounds up for volume.
But rounting up 1.14 to 1.2 is cheating.
My engine is 2.2L (Actually 2,171 cc)
Much in the same way the old Mustang 5.0s were just 4.9s.
Nothing new, I've also seen 1.2's being badges as 1.3, 1.9's as 2.0 and what not
Tbh rounding off isn't that hard
The 5.0 was actually 4945CC.
But bigger is better I suppose
You can't round up less than half.
You round to the nearest zero... just just up.
Otherwise I can totally drink a gallon of milk... rounded up from .3 gallons.
Yeah, too bad the Mustang fell short of even that.
lexus says mines 3 litres but I bet its like 1.3
its slow
I'm not sure why automakers fuck around with displacements.
its a slow motor
If anything they should be under reporting.
"This is a 2.0L for tax reasons. Please ignore the 3 liters of displacement."
https://youtu.be/moiPUk3dZAY β₯οΈ
BMW M3 GTR @konstantinkomal
Toyota Supra @tuzhikov_dima
Porsche Cayman @litvinovdima
Mazda RX-8 @arturarturov777
Lancer Evolution VIII @jababar
Ford Mustang GT @sergey.andronow
Volkswagen Golf GTI @ermolenko_mg
Police Mustang @dee.pill
My instagram @chekunov_v
PLEASE NOTE: t...
This is a 1.0l 3cylinder. Ignore the other 7 litres and 7 cylinders in my Viper.
And that's usually why all 2.0L cars are just under 2000cc.
So the pedants in the government won't nail you to a cross of tax.
mines apparently 2,994 cc
I know xD
Did the picture of the car I send this morning started this conversation π
My bad if it did lol
oh Mercedes is at least honest about their engine displacement.
6.3 vs 6.2
No the pic you posted the afternoon
π
xD
No the label says 6.3
oh, that's stupid and they're lying.
Someone should take em to court over false advertising.
It worked for the guy suing the tuna industry.
Class action over 100cc 
1,4 liter here with 1391 π
What car
well is my first car tho.. π next one will be Audi A4 B5 Limo from around 2000/2001 with 1,6L and 101hp
I've had my first car for nearly 4 years now 
im 24 now and i made my license last year 31.10 π
since then i got my trusty shitbox π
Oof xD
never had the urge to do license tho
yeah bus and train for me
also i admire cars but too scared to drive faster or expensive cars
but still the old Audi Quattro or a R32/R34 or S15 are my dream cars
Public transport, haven't used it in 5 years 
yeah now in this covid times its even more crap to use publics
https://www.youtube.com/watch?v=_6ekfGd-PZs here's a fun one.
The Porsche Taycan guy:
https://www.youtube.com/channel/UCPF48oj0-WJe0L2FV25i85g/videos
My Tesla referral code:
http://ts.la/bjrn3169
Results from my range tests, banana box tests and other googies here:
https://drive.google.com/open?id=1HOwktdiZmm40atGPwymzrxErMi1ZrKPP
Sca...
Worked in Japan... lived in the middle of nowhere. I needed a car.
pubtrans in the boonies was not great.
But yeah... without a car. Getting to work took 3 hours.
With a car... 2 hours or less.
Also it would have cost me something like 15 dollars a day round trip.
Bleeding brakes is the worst thing ever
Eh
I bled each wheel like 3 or 4 times
and then when the engine was running, the pedal was ultra soft
like, foot on the floor and you might be able to stop while travelling at walking speed of the average human, soft
started in the back
Brakes in the Prius?
nani
and then front left
hold up
No, RX-7 brakes
ah
Is your master cylinder blown?
I was about to panic. How are both rear brakes on the same circuit.
Brand new master cylinder
Did you bench bleed it
You introduced a shit load of air into the line then
Bleed it outside the car.
oof
That's why the pedal is soft
yeah, time to bleed some more.
Gonna need to bleed a lot of fluid through the lines again
I guess I'll just bleed each wheel like 18 more times then
Well... look at it like this.
I'll do it tomorrow
Do you have ABS?
ABS on an early 80s carbureted car?
Yes
Hell no
My E30 has ABS lol
what year is the E30 tho
They came with ABS in 86
IF Eastman is really cold. Him shivering on the brake has the same effect.
Mines an 89
yea, I don't think ABS was a thing on mainstream production cars until 86
fair
Wasn't required till 2012.
Pretty sure the FC has ABS, but the FB has just regular power brakes
Yeah, basically what you did while bleeding was push a bunch of air into the lines because the master cylinder was dry
oof
You bleed it on the bench so its full so that doesn't happen
Well, next time I'll do that
No problem though, you'll just need to bleed a fuck ton of fluid into it
Β―_(γ)_/Β―
I made the same mistake on my E30, and got air into the ABS pump
yikes
So I had to do a couple hard stops with no brakes so I can get the air out of the ABS
Then I could bleed it a shitload normally
oof
Luckily you don't have ABS lmao
Yea, all I have is a splitter t send fluid to the passenger side and to the rear
and the rear is weird
the chassis line goes into the driver's side wheel cylinder, and then out and across the live axle into the passenger wheel cylinder
and you bleed the rear off the passenger side
Ahhh yes, early 80s tech
yep, its kinda nice in a way
Kinda, but I would feel better if its all seperate still
I don't have jackstands, or anything, so I basically have to lift each wheel and take the wheel off
so one less wheel to take off is π
I jacked up the corner and did it under the car
but if I could get to the bleeders without taking the wheel off, that would be nice
Turned the wheels up front for access to those bleeders
the rear drum I might still have to take the wheel off, but the fronts I probably don't have to
shit, you're a genious
why didn't I think to turn the wheels
heh
they're calipers, so the bleeder is dumb easy to access
Times saved.
Even when I eventually buy a brand new car, I'm gonna do maintenance myself
if something fucks itself up or there's a recall then I'll begrudgingly take it to the dealer
We let the dealer service the X5 within the warranty period
It'll depend on what I end up buying
If Mazda somehow decides to release another rotary car, you know I'll get one, and the dealer isn't gonna touch it with a 50 ft pole
Mmmmm
MX-30 will have a rotary range extender?
I can't imagine Mazda having the financial strength to pull of a new niche car.
I've heard that the MX-30 will have rotary range extender
but I've also heard that the "MX-30" will actually be called the RX-7 and be a sport SUV with their new inline 6
So its up in the air
I hope its gonna be MX-30 with rotary
The perfect way to combine good mpg with rotary and daily
Mazda is struggling kinda
wot
I see more new Mazdas than damn near anything else
about the only car that can match the amount of new Mazdas I see is the Civic
I see very few Mazdas in my area.
More than enough CX-5s, but CX-30s are rare.
And very few Mazda 3s.
I see dozens of new models and dozens of older models too
They are doing very well in my area
helped by the fact that there's two local Mazda dealers
There's only one local Toyota dealer, and its kinda far
One of the Mazda dealers is owned by a dude who also runs a Honda and Kia dealership
So Hondas and Kias do fairly well too
Mopars sell pretty poorly despite there being a pretty good dealership network locally
Subaru also has been doing meh
they have a nice local dealership that moved in after Saturn shit the bed
I still remember going to the pool at the Rec Center that was next to the Saturn dealership. On the way into the Rec Center parking lot, you just saw lines upon lines of brand new Saturns and a few crappy used cars. Now the lot is empty as fuck, the Subaru dealership doesn't carry that many cars.
Tesla unveiled its first-ever pickup truck, the Cybertruck, at an event in Hawthorne, California on November 21 β but not everything went according to plan during a test of the vehicleβs shatterproof windows.
Subscribe here: http://bit.ly/ODNsubs
Twitter: https://twitter.co...
Hopefully they can get around to aligning the panels by then.
It'll look pretty nasty otherwise.
oof
That was funny
Or the time that the first Surface was being released, and the first one froze up on the stage
@civic girder Mazda did already confirm there's a rotary engine coming as range extender for the MX-30 π



Last time I drove a Scania was last year.
What we had for school.
Oof, a bit blurry.
But the only picture of the Volvo steering wheel I have that I know of.
@stoic ledge
Source? 
https://www.slashgear.com/mazda-mx-30-ev-is-reviving-the-rotary-engine-as-a-power-generator-08615930/ @civic girder not 100% yet apparently.
The way the journos have been going about it... it's all but confirmed.
Yea, I didn't think it was 100% yet. I know I saw an article about an "RX-7 sport SUV" and they used pictures of the MX-30
This article talks like its 100% fact
I can't read apparently
RX-7 Sport SUV probably to get more clicks.
it was an april fools
Hard to tell these days.
Yea, I couldn't tell until after I re-read the article and saw the bottom
I think I first read it on mobile, so there was probably an ad hiding it from me
Knowing that was a joke makes me happy lol
I have a Dutch sourxe saying it's confirmed
But I don't know what their source is
That's assuming the MX-30 will even make it to the US.
And make it to the US with a REX.
True
okay... even then I remember the BMW i3 came to the US in a neutered form.
I'll be sad and depressed if we don't get the REX
You had to reflash the ECU with a Euro spec one to get the performance.
Range extender would actually do something in the EDM version.
USDM was just there to maintain the battery charge and it was speed limited to 60 mph I think.
iirc the US i3 REX only got you like 40 miles of range
and the total range was less than 100 miles
from what I've seen so far, the MX-30 REX will have like 200 miles of range
140 EV range, and then knowing the rotary, they can probably get at least 60 miles
god damn I need to get a house so I can get 240V
A clean car is a happy car, even if I don't get to drive it bccs of the current events
https://cdn.discordapp.com/attachments/453538648097423361/697830536315404338/IMG_20200409_165922__01.jpg
https://cdn.discordapp.com/attachments/453538648097423361/697830534922895360/IMG_20200409_165933__01.jpg
https://cdn.discordapp.com/attachments/453538648097423361/697830533589237770/IMG_20200409_165942.jpg
https://cdn.discordapp.com/attachments/453538648097423361/697830517525053470/IMG_20200409_170004__01.jpg
very clean

Yea, USPS is pretty slow rn due to the pandemic
But I'm not complaining since they're still actually shipping stuff
I think my door seals come today
but even if they do, I don't think I'll wash just yet. Especially considering that the RX-7 barely moves
what do you guys use to get rid of tree sap, bcs the roof (which i obviously didn't show you) is full of black dots, had some luck getting rid of some of them but it was too much effort and i'm pretty sure there is something for it
clay bar?
Just some Turtle Wax Shampoo gets rid of everything I've ever had on it xD
i imagine you need a special nozzle for that?
I just put turtle wax with water in a bucket, get my sponge, and get to work
this stuff any good then?
https://www.amazon.fr/Turtle-Wax-Streak-Shampooing-Voiture/dp/B01D8T8FQ0?ref_=ast_bbp_dp
oof didn't see the shipping, i think i'll wait bcs lockdown still on, president talking monday so don't know what he'll say
OOF xD
Someone thought it would be an epic prank XD to pour what looks like powder bleach onto my car in the middle of the night.
wtf
All over the front end. Clear coat is gone and the paint looks oxidized
Fuck, that's bad
Overnight paint oxidization....that'd have to be some strong stuff
It was literally a bukakke of this shit all over my front end
And it was clearly tossed from a bucket.
Completely fucking caked on
You should try and keep a lookout from any suspicious vehicles that might stop by to see if their "prank" worked. And if a car does kinda look sus, try and get the plate and report it to the police.
I could, but I'm in an alleyway, and can't see where my car os parked.
I filed an insurance claim.
Yea, that's all you can do then I guess
I was going to get fresh paint soon anyways, because it was already bad, but this is fucked.
Hopefully the insurance can get the paint fixed. Don't want your car to rust
get the insurance to pay for the whole paint 
YIKES
I have good insurance, thank fuck. Gonna be a $500 deductible
Clear coat is more gone than when dad went to get milk
oof
At least it's only a 500 dollar deductible. How much do you pay per 6 months out of curiosity?
Not much. Like 850 or something
Yeah 140 x 6 that seems about right
So it's not that expensive thank fuck
More than I pay. π€
So that means you are younger? lol
I wonder if there's any people with a referral scheme. Bunch of people refer each other to insurance companies to get some cash back.
damn I wish mine was 850/6mo
Yeah, I feel almost lucky. My old insurance company charged me a lot more than that and I was just like yeah screw this I'm out
Was paying over $250 a month for a 2020 4 door Sedan
Like what the fuck is that
2010**** model year
I feel like I was personally targeted because you do sort of have to go out of your way to go into my alleyway, then into the driveway.
This can't just be a coincidence. This had to have been targeted.
MUCH LIKE OUR SPONSOR SQUARES-
uk prices are a whole lot worse from what ive seen
at least when youre young
anything with an engine bigger than 1.2 is at least 2k no matter how much power u get
i know a 1.8l tdci ford focus from 06 was 4.5k per year for a young lad
Glad you managed to get your prices down @tame mesa
High insurance prices are always an oof... especially for self paying students.
And for people under 25.
And for people with newer cars.
Old car and no issues on my record so far... We asked for a lower rate and they told us to get bent
Take their advice. Shop around.
Damn that 2700/6 is brutal
I'm sitting pretty at 650/6
I imagine the Corolla nets me a discount.
"safe slow driver discount"
I should actually check and see if my rates have gone up. I was in an accident afterall
That new manual corolla tho
I saw an ad for that and I was like
Huh?
Those exist? In America?
This is what the paint usually looks like.
Although to be fair they didn't hit the back with their chemical solution so that still looks fine
Gotta get rid of those steelies, man.
i'd be ticked if someone messed up the paint on my RX
it would be damn hard to find matching paint for it
given how few of them were produced in that colour
Yeah I'd be right fucked off
I still wonder if I'll be able to get my RX-7 repainted in the factory color
that seems wicked high, i pay $700 for 6 months on my 2010 honda fit and im 18
im very glad you got the white interior
Beats all black.
Back in the early 2000s everyone liked the crap on all black interiors by calling them cheap and cut rate.
Now black is fancy and classy.
if I got to pick the interior of my future G70, I'd get black with gray piping/stitching
and aluminum accents
I'd like to replace the silver accents in my car with metal.
The door handles feel like they belong in a 15,000 dollar car.
Not horrible, but perhaps Toyota could have tried harder?
My Accord had nice quality door handles. Metal I think. Yes. I have been thinking about that. Social distancing is driving me slightly mad. As is being unemployed.
@dense shard Holy shit how does it drive
Pretty good. I won't say it's a hot hatch. It's more comfy than sporty, but honestly it does the twisties well enough for me.
Driving relaxed benefits you here tbh. Longish throws on the shifter, fairly relaxed throttle tuning, and the clutch is... okay it's kinda flat. No worse than the Honda Civic, but a bit worse than the Mazda 3.
Long story short. It's nice.
is it electronic throttle?
yep
big yikes
Mind you... my Ford Contour had the same throttle response, and that was analog.
Now that is down to engine tune
Nah. You just need to take big stabs to make it vroom.
It's not jumpy like a lot of other cars.
My experiences with electronic throttle have been poor
Y'know... toe the throttle, and you are at 90%.
This car is 50% is 50%.
That's my take. It's more Nissan than Honda in throttle response.
The Prius has the biggest brain throttle I've ever seen. Its why I dislike electronic throttle, and shows just how badly it can be tuned
floors it
insert spongebob screenshot here
lawn mower noises intensify
it literally takes 2 seconds for the throttle to respond
Honestly. I've learned to deal with electronic throttles.
The Corolla has these... quirks.
I didn't realize how unresponsive it was until I got a car with a cable
It seriously reminds me of the Contour in a lot of regards.
Honda throttles are almost jumpy imo.
I keep my family's Rogue in eco.
Dunno why, but it feels right.
That's almost more of a EFI thing
Miatas are very jumpy too
but my RX-7, which is carbed ofc, has a very linear and raw feel in the throttle
I believe that.
it doesn't jump when you tap it, because the carb can't instantly inject fuel
The Corolla doesn't jump immediately if you stab the throttle.
... that or my definition of stab is different.
Stab meaning you give it a healthy amount of throttle?
Yea, so a healthy amount. Somewhere between 1/4 and 1/2
It's been over a week since I've driven my car.
but I expect my engine to jump when I slap/stab the throttle
tap it, I expect a sputter/light rev
When I floor it while moving, I expect the car to move
I've not encountered an electronic throttle that can respond as instantaneously as a cable can
the computer mediates your inputs and can give you the stink eye if it wants
The Civic Si is pretty damn fast.
but the cable, you're in charge
That car was sublime. Likely best sub 25k car period.
I'm sure
This is the 09 era cars.
Yea
I've driven an NB Miata
the throttle is ridiculously jumpy and the motor is very rev happy
the throttle response is insane
The 8th gen Civics were throttle by wire for context.
hmmm
It depends on the car and automaker.
Cause the Contour was analog throttle, and it was kinda dopey.
That could be due to the economy tune or a loose cable
Once you gave it the beans, it went, but otherwise it was kinda "eehhhhhh, really, do I reaaaallllWAAAAAHHHHHHRRRRRAGHGHG"
It had VTEC.
Second intake came on at 3.5k and you felt it.
And heard it.
did you just get slapped by the bot?
yes
I used a censored word when describing how the computer can decide whether or not to give you throttle, and how much, when you have drive by wire
Civic has two intakes?
Once again. I've never really had issues with throttle by wire.
I've always gotten used to it pretty fast.
I've gotten further from used to it since I got a car with a cable
It wasn't so much a fight against the machine, but rather how can I tickle power out of this beast.
Sometimes you don't. Simple as that.
same thing in this context, in my book anyway
To me it embodies the "its a feature" mindset, which I hate
Be it throttle tuning or transmission tuning.
Yea, I guess
All automakers have moved to throttle by wire.
sadly
It's not so much a feature, but just a thing.
Done right it's faster throttle response.
Done differently... well it's set for fuel economy.
I'm not sure how that's possible
Ask Honda.
How is it faster than literally opening the throttle plates directly?
unless you're somehow preemptively reading throttle input
which sounds dangerous
No matter what hardware you use and how precisely you tune it, there will be a small amount of input lag. If you're well versed, you'd notice. Kinda like how you can notice input lag when PC gaming
?
