#cars
1 messages ยท Page 245 of 1
i dont all the time
Otherwise it won't move xD
Mine won't even do 190kmh
108mph or something i was right?
Lol well yes, figuratively speaking
๐
112 Max but that would be sooooooo scary
do it
No.
aww
Going home last week from Germany late in the evening on zhe autobahn, unrestricted 
fast as ze fuck
Yeah 175-ish, but that's fast enough
That's 108mph
190 = 118
175 = 108
Oh ok
the engine was fine. like the needle didnt even go slightly higher
it never does
like my parents car which constantly goes between 100c and 95c
That's a bit hot, isn't it?
Mine is slightly over the middle mark when it's hot out bit when. It's middle to cooler it's straight on the middle all the time
As long as it's not in tbe red it's normal
Mine doesn't even have a temperature gauge (:
wow
Yea
ofcourse
im always kinda paranoid that my car is going to overheat. but it stayed at 90C while it was like 43C here with the A/C on full blast
I have no idea, I can check it in the screen between the gauges, but meh
1 thing im curious about. when i press a certain button it goes through the screen and shows me what its able to show as a warning. and it shows the oil icon. Im curious whether it tell me to fill up the oil, or to check the temp of it
Nope
Too lazy
It has everything the car has as options. so also the heated seats. and that sort of stuff. so its a really thicc booklet
and im too lazy to read/search
The manual isn't different for each trim/option checked xD
Yes, that's normal
Only the radio/entertainment system came with a separate manual often
im pretty sure it did with mine ๐
Aftermarket unit ๐
||Get's muted for using emojis||
Yes I am

I identify myself as a tank
Can i see your shaft then?
Ok, that got out of hand very quickly
Beep. Boop.
What about 170 mm?
(Someone had ordered a 17 mm. And they got a 170 mm instead)
LMAO
Btw. That part is like $3,000
Lol nice
Jezus
For what do you even need a 170mm
Like i don't even have bolts that big at work
It's for the new guy.
what type of socket is it using? 1", 2" 
Two and a half.
what she sees
what he sees
this is what they use this socket on
https://www.reddit.com/r/Tools/comments/5k60lq/so_this_is_what_they_use_that_170mm_socket_on/
It's the size of a head.
Okay
That's bigger than i expected
Also in that reddit i saw it used a 3.5inch socket
And the tool to tighten them with was aroynd 599pounds.
So ye
@tropic silo Well then, that's a lot of torque
What in the world

Did I... Miss something?
what happened?
They probably used too many emotes in too short of a time.
yikes
Or possibly images? No idea.
Why is that mute-able offence?
It could just be something that triggers the bot.
I mean... spamming nothing but emotes for several pages worth doesn't sound too much of a stretch.
So just got a flashing check engine light on my 820.455 mile 1993 Toyota pickup and it stopped flashing
Close one lol
I'm trying to hit 1 million lmao
I just saw a Mercedes R63 AMG!
@fathom socket motor blows at 999,999mi
I just crossed 650 miles in my Corolla.
My goal is to hit 130k by the end of this month
My goal is to get a car
My goal is to get 2 more videos uploaded this month.
I'm probably going to hit 45k in my Mini this month
https://youtu.be/NkiyAZ63RT8
Looks like Bugatti finally did it guys.
Top Gear can exclusively reveal that Bugatti has smashed through the 300mph barrier. On 2 August 2019, Andy Wallace hit a vmax of 304.77mph in a modified Chi...
same
That's insane they kept that power a secret ๐
490.47kph... damn
What Chiron is that?
Doesn't look like the standard Chiron, and it looks like a brutal version of the Chiron (and I like it quite a lot).
Nice to see a more untamed version of a usually very refined car. ๐
They hacked it lol
Aaah, "Andy Wallace hit a vmax of 304.77mph in a modified Chiron at Ehra-Lessien"
Wellp, I hope they make a road legal version of this
SS version
Haha
And not in black, because I want to see all the angles and details of the body work ๐
So that car can drive casually at 250mph without Breaking a sweat I'm actually terrified from that car I didn't expect to go that fast lol
Congratulations Volkswagen
For making that engine insane
So all of this time Bugatti put hidden sandbags in the car ๐
Wouldn't say sandbags, but I believe that the standard Chiron wouldn't make the cut.
Hence them making this modified version with a more aggressive setup (I would assume they fixed the gear ratios a bit as well).
Also, "Ehra-Lessien" is a VW group exclusive, hence them having an advantage of a perfect straight line to test top speed on. ๐
The only time when going through ice cream wouldn't be recommended. ๐
Puts head out the window at 300 mph
Flies out the window

okk
What do you mean? The livery?
I wonder if they will make a true GRMN version of the Supra.
This actually looks pretty sick.
Okay?
new cars look weird
ok new speakers i got

I'm way too lazy to upgrade the speakers in my car
The original ones are good enough along with a subwoofer
I spend way less time listening to music on the road nowadays, since my daily commute dropped from 64km to only 18km


I had those in my old car
in the front doors and on the parcel shelf
They're not too bad
just
tell me how em sound like
@viral matrix kai ne nyt vittu v oittaa rellun vakiot
Ei oo ainuttakaa relluu ollu
the ground zero ones
They sound better than the stock ones for sure
Depends on your amp
lets say
stock 50w one
for atleast now
besauce im not gonn a listen for bass yet
gotta buy an ground zero amp u know
besauce these l ook like those decent speaker kinda
Driver: Michel Feghali Car: BMW 330 CI Category: RWD Team: Motortune Racing Location: Wadi Chahrour A dominant performance by Michel Feghali onboard his M3 b...
Japan has some excellent hillclimbing places.
Several tiny mountain passes... short events, but would be fun.
He gave that car the beans for sure.
Hill climbs are awesome
hey, unmuted
tbf i'd crap my pants if i were to do anything on those types of road in a car...
So yeah. Nice thing about gopros is you can capture every angle of the crash.
https://www.youtube.com/watch?v=-hIsWx5qbQs Just as a tiny side note: They survived with minimal injuries from what I understand.
The driver Jeremy Foley and co-driver Yuri Kouznetsov walked away from this epic crash at the Devil's Playground section of the 2012 Pikes Peak International...
Also fun fact. You can hear the co-driver shitting his pants.
But yeah. Don't stiff your cage builders, wear seat belts, and wear ALL of the crash gear during shit like this.
And by survived with minimal injuries... they literally walked away from it.
How's it feel to be in a Bugatti that reached 304mph
I wonder what it would do in the other direction.
The Guinness Book of World Records requires a two-way average, as does the FIA.
Driving manual feels like that each time.
That being said. What I'd like super car makers to do next is bring down the price of upkeep and boost fuel economy.
holy shit that beamer driver has some car control
I get it. It does 300 miles an hour... but what about the price of an air filter... or oil change?
C'mon McLaren... democratize driving fast! (because we are all capable of driving super cars responsibly and safely)
thats not really relevant if u can afford to buy a chiron, its just pocket money for a multi millionaire
There's honestly nowhere else left to go.
i think a reg service is around the 10K mark
Cars are getting faster and more powerful at the cost of efficiency and weight.
Mainly an issue for mainstream makers, but frankly driving down the cost of supercar ownership would be a boon to the everyman.
which will never happen
toys for the rich
theres plenty for us
We need more options.
Cause the Miata and BRZ aren't what I'd call a wide range of choices.
Arguably a WRX...
Oh and Civic Si... I guess... ๐ค Can't say I was that impressed by it.
unce unce unce unce unce DO YOU LIKE... MY CAR
Im back bitches
cool
Indeed
@tropic silo behave yourself 
@dense shard holy crap that view from the outside...
@fossil imp dont use a pog or you'll get muted too 
I don't know their definition of spam anymore tho. The last time i pogged once and i got yeheeted into the no-talk zone.
coz u been naughty before ๐
Nah, not naughty
sure ๐ค
heh u dont care u mean
Don't expose me
okok
So it's a production car ๐ค
So I thought it was a modified version of the Chiron that doesn't count as a speed record for a production car
So it's limit for a Chiron is 261mph and they decided to keep it's performances a secret that can do 304mph by modifications lol
It's possibly the first of the Chiron Super Sport.
TL;DR - They added more power, and a taller top gear for the record car.
Thought so too
Nyooming mobile
I actually felt scared from that car I didn't expect it to go 304mph
It's terrifying to drive that fast
I would like to try it one day
Same I rather be in the car then rollercoaster
@civic spoke it's like old school nascar
What'chu mean?
I know little to nothing about Nascar.
All I know is that the like to turn the one way.
That's what old school nascar car's did change minor things from production vehicles
in order to make them more trackable
faster
etc.
Ah.
Here I think Bugatti used the same engine as in their EB110 tribute vehicle-thing.
Yeah, basically the same rear.
No idea why mine was added a spoiler to it.
idk
I say basically the same rear. But what I really mean is the underpinning.
but it used Michelin Pilot Cup2's for the speed run
I feel the same.
They are for sure up there as one of the top tier semi-slicks that are still legal.
PS4S will do you just fine, honestly.
I'll try to get the PS4 for my car later.
I run pilot a/s s3+ for anything else
They don't have the PS4S for my size.
What size?
I run continental dws 06 because they were also highly rated
but jesus christ
they suck
I forget what the size was. But I'm running 16 inchers.
I think that I had to go up to 18 inches if I wanted PS4S.
They should make them for 17inches
low profile tires make me cringe to drive on
I remember checking all of that a couple of months ago.
But my size is like 205/55R16 or something like that.
But I think the normal PS4 is one of the better tires I can get for my car.
I can buy a set of these for the s550 for the memes
mh
someone put these on their minivan
That's the older Pilot Sport tires?
Yeah. That tire is a few generations old.
Runflat tires are rubbish
I forgot the Sienna is still around on virtue it offers AWD.
And hasn't been updated in about as long.
@civic spoke I did not see that
The Michelin Pilot Sport Cup 2 has been developed in partnership with AMG SLS Coupe Black Series, Porsche 918 Spyder and 911 GT3, and Ferrari 458 Speciale.
but they could fit on my s550
I just need new rims
to accommodate them
Hah. My size isn't even on the list for the normal PS4 tires.
I may have to buy a set of tires soon โข
and that one guy who shits on me for dailying a Prius won't shit on me as much
They'll shit on you just as much pretires as post tires.
He needs to establish dominance over a person who is in all reality likely happy with himself and his car.
Just as big truck drivers need to establish dominance by taking up charging spots.
@civic girder loser
bought a prius
and not the other Toyota hybrids that are better
I got the Prius for free
And I say you'll hate me less because I'm about to buy a second car/project car
I won't
lol
I can't
well, it's not a Toyota, it's not a hybrid
it has pop up headlights
it's 80s
and from Japan
and a hell of a deal
oh
and it literally drinks oil for breakfast
Can you guess that Pokemon?
oh we reviewed a EU available model finally
This week we Lab Test the Mazda3 Hatchback #Mazda #Mazda3 #FeelAlive Our Recent Vids: 2020 Kia Telluride: https://youtu.be/Al0cOauoMfs 2020 Range Rover Evoqu...
that couldn't have been a more perfect hint for what car I'm buying
ngl tho, the new Mazda 3's look fairly good; especially considering how everything else is adopting the "BIG GRILL GOOD" brute force approach to car design now
and that color actually looks really good
nice
The Corolla hybrid is supposed to be pretty great.
Drive the Mazda before you buy it.
I thought I could handle Mazda's form over function, but the rear blind spot is more like... a zone of blindness.
Also no independent rear suspension.
Very cozy interior tho... I enjoyed the shifter's position. The center console is very high making you feel a bit like you are in a sports car... too bad the seats are a bit tight for my W I D E butt.
Oh and a solid af engine. The 2.5 pulls better than the Corolla's 2.0.
I think you got the wrong message from my hints, lol
the Mazda 3 was a hint, because Mazda
the literally drinks oil for breakfast is a hint because it has a rotary engine
80s
pop up headlights
It's a RX7 FB
@civic girder you hate yourself?
yes
but I like it
Miatas are basic bitch, pretty lame and overdone
Mustangs are also overdone and generic (and most of them are pretty ugly imo)
MR2s are hard to find
Rotaries are just different
you don't see them very often
in fact, I've never seen an RX7 in person before
can't
It's a glorified RC car
FCs are a dime a dozen where I live
relatively speaking
Just don't get a convertible one, it adds way too much weight
Datsun 280z master class
https://www.youtube.com/watch?v=tKmMzgpPonc I honestly miss Japan sometimes. The roads there could be so nice.
Another wonderful day on a small mountain road. Enjoy. Music provided by: Kevin MacLeod. Credits below. "Perspectives" Kevin MacLeod (incompetech.com) Licens...
Utter pointless, and I had no idea where the hell I was going sometimes.
Suddenly I was back out on a road I was familiar with.
Sounds relatable
japanese mountaisn besto
Yeah, I am in love with the hard top FC's @civic girder
They are pretty rare where I live too, but every couple of months a few nice ones pop up on craigslist/Facebook market.
I wouldnt mind owning an FB if it were to come to that either.
All RX7's are beautiful.
True
I saw this today.
The charging port for the new Porsche Taycan is amazing. https://i.imgur.com/qknTXAI.gifv
The red box is a Volvo Valp
and that charging port seems like a really big point of failure
imagine if the motor inside commited lifen't
That's something that the second owner has to deal with, after the warranty is over.
You literally stroke the car to open the port...
C'mon VAG, you don't need to reinvent a door.
Why would anyone need that
That's stupid.
At least Tesla makes sense.
They open when you get near em with a cable.
Porsche requires foreplay.
Lol
What's wrong with opening the port
a) by pressing it
b) adding a little handle/cutout to open it
Works just as well, and less stuff to break
All of those still have something to break.
If that's going to be your argument, you may as well not have a door there period.
Since a filler cap will suffice.
i've seen a video of a guy whose tesla wouldn't charge, all because a magnet on the charging port door had fallen
this one IIRC
https://www.youtube.com/watch?v=xPY6RxNA8T4
That charging door on the Taycan looks like something that'll break easily.
that capacitive sensor is gonna be a big point of failure, even the motor to open it is a big no no
the less moving parts, the less points of failure
Yeah
with the tesla at least you can still push it to open manually iirc
Its def. a little better than the Taycan's one.
oh yeah its a hell of a lot better than the taycan
though its more elegant than the leaf etc being integrated to the tail light and doesn't get filthy and dirty as easily
the tesla one that is
True
I imagine the Taycan one getting stuck and not being able to plug in your electric car.
That'd suck
yup
can't buy a Porsche without having stupid overengineered stuff
^
Lmao
cupholders, more like, transformers
^
the most complicated cupholders i've seen was in my parent's ford galaxy
I say that because the FB doesn't have cupholders, period
The E46 BMW has amazing cup holders.
Are you gonna get the cool ones that go into your air vent?
What?
my cupholders can't hold large cups
I can't imagine cupholders in the airvents being "cool"
I have 4 cupholders in my center console O.o
@night current imo thing that go on the air vent are stupid...
These cup holders are great.
Lol, they arent cool, but I like em'.
I've actually never had a car with a handbrake there
True Glass
mine have always been the foot pedal
What car is that? @civic spoke
E46 BMW
because 'murica & automatics @indigo coral
3 series
One of the world's great feats of engineering.
The only thing that sucked about the E46, was that cup holders were optional.
so that's why saab failed, overengineering 
But replacing the part is super easy.
yup and soccer moms
Saab died because GM killed them out of spite.
my old BMW E28 didnt have cut holders
two of my cupholders are a bit broken, need to 3d print a new part
to replace it
xD
Besides, I don't see how Saab's overbuiltness was a problem.
filled with trash
I have 4 in my Toyota, 2 up front and 2 in the back. I don't count those shitty door ones
i got 2 in my A2 :)
remember the Saab WRX?
@torpid dune that's just swedish engineering
I have 0 in back, 4 in the center console
9-5wrX kek
Wasn't a 9-5.
"Here SAAB, here's an Opel. Replace the badges with yours and sell it."
SAAB - lolokay
what was it, i just remember its a wagon
9-2X.
ye!!
2 above the radio, literally infront of the a/c (which actually cools down the drink during the summer :D
ahh 9-2x thanks
And remember, the hyphen matters.
im on a new keyboard it feels weird
Otherwise you're talking about the 92.
Lol
Two-cylinder two-stroke.

wait does it rev past 10k?
The whole body was stamped from a single piece of metal and had holes cut in it for windows and doors.
thats tank technology epicness
Before 1952-53, you didn't get a freewheeling device, so you spent a lot of time accelerating and braking at the same time.
lmao
Two-stroke.
ahh back in the days when you needed a clutch
That compared to the 93, and its big brother the 96 seen here, plus their wagon sister the 95.
None of which are to be confused with the 9-3, 9-5, and the unreleased 9-6X.
The hyphen matters.
Old school was good school
It's the difference between rock-solid turbo 4 and a series of three-cylinder two-strokes.
They did move on to a 4 stroke towards the end.
The 3cyl had a freewheeling transmission, though, so they were quite nice.
And they sound like angry rotaries.
Lennart Olars with his Saab 96 2-stroke/2-cycle on song in Skepptuna, 2004. PLAY IT LOUD!!
Only weedwhacker to have won the Monte Carlo.
Give it to Saab to remain unconventional in even with 4 stroke.
Wasn't it a Ford design?
They weren't like Lancia, who came up with their own.
epic tech
I just find the V4 a bit odd.
Still... looking at RCR.
Huge shame the XL-1 never made it to production.
Neither did this.
The Aero X.
That and the Phoenix.
The PhoeniX was merely a concept that would lead to a new platform, this was a fully working vehicle.
With 1 door.
Minus that stupid trunk tray, and that could have been a hit.
Hell.. neuter the cockpit door.
Screw you GM for killing SAAB.
The trunk tray houses the toolkit.
Including jackstands and jumpers.
The real trunk is that little window above it; it's quite deep in there.
we talkin bout saab again
With me around? Always.
Even if it is a little eccentric.
A 96 is a car I desire.
(That's a 92.)
(Specifically, that image is a 92 that somebody mated a 9-5 V6 drivetrain to.)
I like the tall grill.
well,yes
Give it up to a Saab owner to do a Saab swap into a saab.
and that car is runnin tbh
Not a K20.
u didnt
The Finnish one, right?
I like the moss trim.
yes
Saabin kytkin laittaa vastaan oikein kunnolla mutta saadaanko kytkin tรคnรครคn kuntoon?
yes oh my
Yep, I saw that.
different episode
I think I get the gist.
Shame.
They're amusing cars.
neighbour had a one
Funky, fun, and a better option than whatever the Germans coughed up towards the end.
sold it for 300โฌ
I'd love a two stroke. Should be easy enough to keep running.
I should see if there is a car meet in my area.
I know there's an occasional Cars and Coffee at a gun shop near me.
Alabama as hell.
@tight cypress (That's not Swedish, that's Norwegian.)
Also, it's got an รฅ, not an รค.
It's time to drive an hour to look at the FB
This was a fun video. https://www.instagram.com/p/BkcJ8TdgKjq/
Seems about right
Saab killed saab. They were not profitable. GM was trying to keep them afloat, but Saab in their infinite wisdom didn't listen and kept redesigning everything increasing they're manufacturing costs. So GM after getting burned repeatedly and fronting the bill said no thanks and ended it.
GM forced Saab onto increasingly shitty platforms with the last few cars being literally rebadges.
The 9-5 languished without an update for about a decade before it was updated a year before it was sold.
Same for the 9-3.
The 9-4, 9-7, and 9-2 weren't Saabs even in the slightest.
Even if the 9-2X was arguably the superior WRX.
And Saab in their infinite wisdom created cars vastly safer than anything GM managed.
Safe is cool and all. but in the world of business, it has to sell.
Latest 9-5 was also based on a Opel Insignia/Buick Regal, more than a rebadge tho
But also:
Saab: can/must choose from GMs parts bin
Also Saab: develops their own infotainment system
Saab has always tried to do their own thing no matter what
@tropic silo hope you get banned
thats not very nice now is it
He posted emoji, a gif one @fossil imp
Like that's like spamming mein kamf every 5 seconds man
no its not lol
Yeah man
no maaan
It's like that, but worse
@vital glen Don't be a dick, look it up in the #old-rules ๐
@fossil imp nah ๐ ฑ it's like posting gif emojis in a car chat, with the zl1 Camaro prices being slashed to be more competitive with other offering, is a criminal offensive
Wot? Ok
Camaro ZL1 prices are merely being brought in with reality.
anyone heading to ls fest?
tfw your WuTang whirlies spin 30lbs of boost and you shoot a 150 shot of giggle gas ebcause they need the whole gapplebees menu not just a gapitizer
Hit your head slightly to hard against the door buddy?
Triangles.
Oh nice East! Is that yours? Or were you checking one out?
I saw a nice yellow Ferrari
It's probably just decomposing
wow, definition of idiots at FIA at work - they put a sausage kerb at exit of Parabolica, which became loose https://www.reddit.com/r/CatastrophicFailure/comments/d0u78r/07092019_formula_3_driver_peroni_gets_launched/
Alexander Peroni had a shocking accident earlier in the Formula 3 Race at Monza as a broken sausage kerb on the outside of Parabolica launched him into the a...
FIA has decided to remove all sausage kerbs in Parabolica before FP3 after the massive accident of F3 driver Alex Peroni this morning. Race director Michael Masi is in Parabolica right now.
#F1 #AMuS #ItalianGP
503
2333
@civic spoke epik
nice camo
don't like those rims on a corvette
Are they supposed to be similar?
@vital glen there are crazier crashes tho https://www.youtube.com/watch?v=NIhHUk9mk9o (watch the start, then from 7:12)
full race - https://youtu.be/nzW5l0ydVBA support me on patreon - https://www.patreon.com/CrashRacing

Slammed as fuck
This week we Lab Test the BMW X7 xDrive40i #BMW #BMWX7 #TheX7 Our Recent Vids: 2019 BMW X5 xDrive40i: https://youtu.be/v0uNxgs901E Quick Look 2020 Telluride:...
new one is out
My goldfish decided to 4-rotor swap my Mini, which has had the side effects of making it slightly faster from 0-60 but it's somewhat less fuel efficient now
I need to go refilm a road. Hopefully youtube won't screw me on artifacting.
I want a moped tho
Ride for fun with 1 gallon of gas
Only $2 on premium gas that last about a week
Yeah
But the guy came back lol
I told him don't do that again because I know that car is very expensive
Well it's about $190.000 or higher depends on the specs you choose
anybody here would tell me if its worth this tire damage to take to the mechanics or is it cosmetic....
The scratch on the side? Depending how deep it goes I'd say you're fine. If it's shallow nothing to worry about. If it's a deep gash then take it to a tire store, they'll probably take a look at it for free
What happened to cause it?
You're probably fine then, I've nicked a curb a few times in my car and scuffed the tire
Yeah
If you want, you can take it to Les Schwab or something, they should take a look for free
I bought my tires at Costco
If there is any issues with my tires for the next few years they usually replace the tire for free
I got Bridgestone roadsters or something
I think I got each for 60 new
The sidewalk of my mom's car is chewed up a bit
It's been fine for 30k miles so far
At least
I'm quite new to driving cars and this is the first car I've owned
(we got the car with those issues already there at 30k, now it's at 60k)
Oh I don't blame you at all, tires are super important
Better to ask/get it looked at
Yeah I guess the next time I go to Costco I'll check it out
๐ sounds good!
Just wanted to know if I can make it a priority or not
Like if it is I will go tmrw morning and get it seen
But if it's meh ..
Personally I'd say don't worry about it too much, just get it checked
But I'm also not the most experienced either
If it is a deep rip.
There's not much you can do to fix it.
Sidewall tears are a death sentence.
But this looks fine tbh.
@lyric tulip yeah it's good. My sister owns a 1992 BMW and she accidentally took a chunk of rubber off of her 2 right tires and few weeks later one of them blew up on the highway so yeah pretty scary
$200 on each tire tho rip
Probably a very expensive BMW from 1990s
With heated seats and a steering wheel
With only 1800 miles
It depends on how deep it is... The sidewall of a tire is quite soft to absorb shocks etc. If it's a bit deeper, it can be a hazard, causing the tire to blow
If you can see it's only a superficial mark like on falcons car, then it's fine. The rip looks to go a bit deeper, I'd get it checked out
Yeah
I told my sister to stay away from the highway until you get new tires but she accidentally went to the highway without thinking fast lol
And boom
I'll go tomorrow then
those tires on falcon's moms car are 5 years old and gunna be replacing 
5 years isn't that old, if the rubber isn't cracked/dry and the tires have enough profile left on them... Why not
^
If it isn't cracked, dry or low on profile. Than you're still fine to use the tires.
@stoic ledge At 5yrs+ you are stating to get dry rot
at 3yrs the rubber starts to become less flexible
Really depends on the tires, weather conditions etc
@stoic ledge that's everything
Yes
Avg doesn't mean his tires are worn too
To be fair the general guidelines call for oil changes every 3k miles
I imagine modern tire compounds are designed to last longer
well these tires have 60k on them and are starting to wear down
and we're going into rainy season
theyre still legal atm, but its time for new ones
Makes sense
(also theyre shitty tires)
hankook optimo, theyre super loud on the highway and don't grip that well
Kek yes 3k miles oil changes
Hankook Ventus Prime 3 are great tires tho ^^
Probably not suitable for a "SUV" like the RX300 tho
@stoic ledge crossdressing car*

Ah ok xD
anyway I cried when they race this car instead of keeping it inside covered in dust https://youtu.be/PFUlMUo3h10
After almost 6 years I was finally able to see again the white and blue Zitro Racing Porsche 917 (chassis 917-025) I recorded in Monza during a historic raci...
Hemlo
Am in Japan
I see plenty car

Do you prefer angels or demons?
Nice
@serene jetty pictures are okay. But advertising yourself isnt okay. Might want to delete that before a mod notices it 
And make sure to remove the emoji while you are at it. Might get banned because of it.

Lmao
@stoic ledge meanwhile my tyres are 10 years old
Oof old winter tyres, always good
How much profile left?
alot
Kek ok
the slicks are homemade aka.burnouut
Lol classic
Well winter tyres are often softer, as long as they don't have cracks in them...
Damn nice
> winter tyres have more grip???
Yes (?)
I drive on summer tires too
Winter tires aren't worth it, the 2 times a year we have snow around here
No slicks for daily driving
we expecting 60cm of snow
we literally make an track to our field
Nice
My tires in the butt end of the car are half bald and half perfectly fine!
I never drive on bad tires
Got 1.5 year old set on my summer rims and one year old set on my winter rims
And just bought new pair of tires for the bike, like 1.5months ago
But I also have two sets of bad tires for the car
With rims
I can't afford new tires, so I'm just dealing.
But can you afford a new car when you crash because of your bald tires
They're fine
Now that the car is in alignment
The bald part isn't even touching the ground anymore lol


Careful, Emotes are banned in here remember
^
tuommosta putkea aloin tekemรครค. Virit: 110cc 28mm mikuni
this exhaust to kaas??
2 after each other are considered spam, so might need to watch out
@viral matrix i have seen that bike ridin
@indigo coral I think I'm okay when posting something along with the emotes
That's what i thought too. Until i couldn't message anymore
Imma just edit here to avoid mutes
Does a 1970 dodge challenger with under 1000 miles for 40 grand sound too good to be true?
I think the base challenger came with a straight 6.
So I could see an OG example of that going for 40k.
dx corolla here i come
@floral canopy for under 1k miles that is an insane deal, if youre going to look at it look very closely at the body lines and make sure that they line up very closely, check under the car for any nasty looking welds, that is a huge red flag. And check the engine bay, if the car is pieced together then chances are they missed a few spots when slapping paint on it, check for more that one color on all 4 corners under the car. also check for excessive rust under the car on the floorboards and frame rails, rust means it wasnt properly taken care of and can be catastrophic, and take it for a drive if all of that other stuff checks out, if it doesnt drive straight in the back its a bad deal, if it pulls to one side or the other chances are it needs an alignment, but still be super cautious when buying classic muscle cars, people will try to screw you over more than you think
Or they honestly think their crapcan is worth every penny.
"no lowballs, I know what I got"
true
Looks to be in great shape
@floral canopy that charger should have one of these engines, two different 383 engines available for the 1969 model year: 2-barrel and 4-barrel. The 2-barrel was rated at 290 hp. In 1969 the B-series engines were all painted Chrysler Engine Turquoise with the exception of the 4-barrel 383 four speed and 440 Magnum engines which were painted Chrysler "High-Performance Orange". As usual, the 426 Hemi was painted "Street Hemi Orange".
you can tell the engines by the color
Is that gross horsepower or adjusted?
im pretty sure that its just flywheel hp
only 1k miles since it was put back together
Well if you plan on driving it around, could be worth it.
if you want a street strip car its great, if you want a daily, its not
It does have disc brakes fitted, meaning you won't crap yourself at every stop.
meh, disc brakes are for babys, drum brakes are the way to go
Can't stand drums.
Horrible devices made to flummox anyone trying to replace the shoes.
me neither
How they're "simpler" is beyond me.
im gonna do a disc brake conversion on the back of my truck, im doing a frame off resto mod on an 89 f150
i already have all the parts im gonna need, but i just need the time
nice
yeah, im gonna put the body of the ford on the frame of a dodge dakota, that way i can put a 360ci cammed and boosted v8 in it without making gustom motor mounts
and ill get the independent front suspension instead of the twin i beam that the ford has
Gr8 weld job lmao
those are some nice boogers
Less stuff to break, cheaper to buy
Yeah but no amenities, you don't get helpful or any of the nice to haves
@civic girder You must hate yourself
Should I have bought another Prius instead?
double hate
Either way, the RX-7 is different
the prius makes no sense in the Toyota line up
Miatas are boring and generic at this point
everyone's seen them, everyone's modded one
gotta mix it up
not for long
a trashed Miata would have cost me $4k at least
Yeah
and an MR2 would have cost more
the first gen and second gen are cool
especially the SW20
but, yea, RX-7 is a refreshing change of pace
@indigo coral the truth is the truth
doesn't mean you have to be a dick about it
I am not saying he is dumb
I'm just saying that it's a bitch to work on
The rotary community is machoism incarnate
"bitch to work on"
is mechanically simpler than a piston engine
Well yes less moving parts
and mechanically simpler
does not mean not a bitch to work on
idk about you, but having all the other bs would be much more painful
have you ever owned a rotary?
Worked on one with a friend
and what exactly did you have to do?
I sat around giving him tools and holding shit
He essentially rebuilt the engine because apex seals and new housings
I would much rather work on a pushrod than a rotary again
you have to get the rotors and housings resurfaced ofc, and get new coolant seals and apex seals, and whatever else you want to replace; and then just stack it all together and bolt it up
way easier than removing heads and cams and separating the block
Sure........
I don't see what's so shitty and annoying about it....
badss
Lewd Lil' Foxy#0001 was muted
