#tvos-jailbreaks
1 messages · Page 40 of 1
A tool to save your SHSH2 blobs online without using the CLI.
yup
Oh wait thats different
So if its saved on that site they still might not be valid?
I have to use the checker?
well, maybe but the checker will verify
no apnonce
Ok cool cuz so far apnonce said invalid
ah, did you save them when they were signed?
Should have been havent done it in awhile but yah noapnonve invalid too
here, send it up and i'll check
Is it cool to send that? Not that i dont trust you
sure
Lol i mean its not something u should normally just give out right? Or no?
Ok for sure
just device ID
Lol how exactly do i send it anyway
you can drag it inside discord
.... iphone?
or upload it to mediafire
I’m having a real hard time trying to find a way to make the jailbreak happen
not really
...
?
What I could do is make my ATV a beta device
“Not really” isnt assuring
up to you really
What I could do is make my ATV a beta device
@reef turtle Yeah... that wouldn't be a good idea
I dont care i just dont want some crazy ish happening
yeah but uncover has support for it
@reef turtle not anymore.
Yeah cause it was for beta 1 and there’s already a beta 2
Yeah I’m gonna have to choose another route
not only that, apples stopped signing beta 1
They’re quick on this
Like i said: if you've got blobs, you can still get to 13.4.5 which is u0 compat
if not; checkra1n
I don’t have any
@jaunty rune the world isn't gunna end
Isn’t checkra1n only for Mac and linux?
yes/no
I meant f this keyboard lol
aren't you currently on 13.4.5?
Yes
okay, so what's the issue?
Not jailbroken. Checkra1n loader/installer on the tv keeps crashing
i do have an idea
Once i got almost to the end but ostly gets 2/3 along the progress bar and exits out
are you able to get u0 working?
when you use checkra1n and the installer crashes.. see if you can SSH in
Ok after it crashes or during the install
after it crashes
I havent done anything after last crash should i restart or anything?
no
if your ATV is still on and hasn't rebooted (since the checkra1n loader crashed) you can try SSH
ok, I'll give you 2 commands
K
did it work?
No wget
really? what was the output?
what was the output?
Need a sec had to restart pc from using checkra1n
oof
Doin the best i can here
no worries
Still saying wget not found
ok, type in snappy
Same
Do tell
Appreciate it
When the installer crashed.. hold down the TV button
this'll bring up your control center
So as soon as it crashes hold it down?
Icant just do that now?
yes you can do it anytime
Ok done
do you see the checkra1n logo?
Yah
click it
Just goes to reinstall everytime
it'll re-attempt to download/install
And crash every time
oh? so you've done this before?
well, at least you can access it and keep trying
Yah it just fails at same point every time
cause what i did, was messed up the fs
then i recovered it with that button
but i'm gunna try something else to see if it works
Oh interesting
Not sure it means anything but one time the progress bar got right before the end before crashing. Every other time about 2/3
hmm
yeah.. what I'm doing is just stupidly dangerous
your best bet is to use futurerestore imo
Thats if the blobs are valid right
Also how exactly does futurerestore work for tvos

futurerestore works the same as it works for ios
just using a USB-C cable instead of a lightning
kinky
Should i do just 13.5?
the only compatible one is 13.5
if 13.4 or lower was attempted, you'd be stuck in a bootloop
however... if you have an apTicket.der.. that could be a blob
you can find it in /System/library/caches/
yes
Found the apticket
Lemme know when i can delete the file
Also what to do with apticket? Load that too?
looks good
Nice
so you can use futurerestore
would you like to give that a try
got nothing to lose really.. just the semi-untether u0
(if things go wrong)
So i can take down the file from mediafire yah?
Ok doin that now
Yikes yah... gonna be awhile lol.that is until my hotpot data kicks back in at midnight lol
oof.. why not use wifi?
Potato speed
ah, strugglenet
I mean im using wifi lol gotta wait for the cell data to kick in after i was on timeout for a month
gunna hurt seeing as its about 3GBs of data...
Yah lol even the lte speed ill get wont do much
Wanna hit me with the next steps while i wait or just get back to you later/tomo
well, if you're using windows, you'll need this: https://github.com/s0uthwest/futurerestore/releases/download/245/futurerestore_win64_v245.zip
Ok have that
that's the most important thing
the second thing is the ipsw that itunes downloads to restore your device with
Where do i go to search for it exactly
you'll need to turn on invisible folders
so, folder options, enable Show hidden files
the IPSW would be: \Users\USERNAME\AppData\Roaming\Apple Computer\iTunes\
for windows 8/10
windows 7: \Users\username\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
In apple tv software updates there is just 13.4.6
Dang hotspot tomorrow. So yah this download plus the other going to take awhile
ok
I'll pick this up later on.. It'll be signed for a while
First you need to jailbreak it with checkra1n
Get that done
Thanks for the help
It should work seeing as you reset
I'll teach you futurerestore, it's simple, but it requires a jailbreak
Early signs are no good. Still crashing back to homescreen
Will try again later tonight
did anyone try to get this running: https://dolphinios.oatmealdome.me/
@trim wagon not afaik, but retroarch might be able to
retroarch has dolphin as well?
btw reprovision fails resigning my apps, does anyone know why? i tried revoking all certs but it didn’t help
@jaunty rune what version of checkra1n are you running?
@trim wagon have you tried downgrading it? And yes, that is possible.. Just need the cores
didn't try downgrading yet, didn't notice there was an update
What do tvOS jailbreaks do?
Yeah my reprovision won’t resign either. Gets stuck at the app specific password so I just gave up.
@trim wagon @devout estuary I don't think Reprovision works with 2FA. I have it signing with an old apple ID that was not converted to 2FA and it worked.
@neon quarry check the pin for that answer
Once 2FA is on you cannot turn it off. I successfully created a new apple ID without 2FA using an old iphone running iOS 8.4
@jaunty rune try a lower version
I think Apple would be sued for that
Give us the ability to turn off unneeded security and quit enforcing updates
If you upgrade an account you get 2 weeks to turn it off. After that no way to go back.
"If you already use two-factor authentication, you can no longer turn it off. Certain features in the latest versions of iOS and macOS require this extra level of security, which is designed to protect your information. If you recently updated your account, you can unenroll within two weeks of enrollment. Just open your enrollment confirmation email and click the link to return to your previous security settings. Keep in mind, this makes your account less secure and means that you can't use features that require higher security."
https://support.apple.com/en-ca/HT204915
I'm on 13.4.8 beta 1 and 0.10.1 is rocking great for me
Also setting up a new ID running newer software automatically enables 2FA with no option at all to go back. I can verify that setting up an ID on an iPhone running iOS 8 does not have 2FA.
Also, if you sign in with an Apple ID without 2FA enabled, it'll ask you to "update" your account
If you wish to keep it off.. Deny the request
ReProvision works fine for me on an account with 2FA but I don’t use it on tvOS
weird it worked for me too in the past
@jaunty rune yes
It shouldnt have anything to do with the version of linux right? Since its only failing at the installer
Also if it crashes again what would be the best steps to take to try again. As far as, reset or restart? Or just try again
Actually, maybe I know some versions of linux won't run it at all - let alone boot checkra1n properly
Ubuntu will work
Thats what im using
But yah if it crashes should i reset or restart before trying again
Yah should i try and grab the checkra1n boot screen that flashes real quick? If that says anything useful
But before i try again. Should i reset or restart? Does it make a difference
don't need to restart, just show the checkra1n loader progress
Right i mean to have the best chance of successful install
I don't know for sure unless I can somewhat assess the situation
but seeing as you're the first one to have this issue, it might be something wrong
Ok should i go with a lower version of checkra1n first or the new one
up to you
Should i capture the checkra1n boot screen that flashes
again, up to you
ooh i see why it does that @jaunty rune
its your strugglenet
it sees that the connection isn't that great and times out
its not the jb, its your network
?
Hahaha F i swear i was going to ask that yesterday
do you have your Apple TV set to your hotspot?
Shit. Well thats a good thing i guess. No wifi. Hotspot enables tonight. the struggle ends at midnight
why not take it to a friends house? or relative?
just ask 'em for their wifi pass 😛
Hah naw ill just wait till tonight to give ‘er another go
okay
that blue bar is a download bar
when it cuts out.. that usually means it stopped for connection issues etc
@analog elk @trim wagon If I recall correctly I read somewhere that it works with 2FA for developer accounts, not free ones with 2FA
nah, I'm using a free account with 2FA and it works
It’s weird, it won’t work with the new 2FA free account I used to sideload u0, but when I log in to repro with my years old free 2FA account I didn’t use to sideload it, it signed it just fine.
Asks to update legacy block
just cancel that too
just install updates
then SSH in and we can futurerestore you if you'd like
Ok says half configured packages detected
ok, are you SShed in?
Wait it failed
connection refused?
Remote host id has changed
that's good
you'll see a thing in the middle pointing to "known_hosts"
just need to delete the known_hosts file
ok
first thing to type: nvram com.apple.system.boot-nonce=0x1111111111111111
second thing: nvram auto-boot=false
then nvram -p
Ok done
Yah
Yes
Just futurerestore app
okay, do you have the 13.4.5 ipsw downloaded?
Yes
Into the 2nd window right
the second window should be: /path/to/futurerestore -t /path/to/13.4.5/blob --latest-sep --latest-baseband /path/to/13.4.5/ipsw --no-baseband
Ah crap have to add my blob one sec
Ok after blob then where to find the next stuff?
wdym?
Ok so futurepath -t blobpath — 13.4.5path
Doh lol got it
but the /paths/ are the paths on your computer to the file
Right how about before latest baseband should there be a space in between the dash and l
no
K making sure
the only spaces are between the ".shsh2" and "--"
same with ".ipsw" and "--"
and also "futurerestore" and "-t"
and "--latest-sep" with "--latest-baseband" etc etc
How bout between -t and blobpath
yes
Ok
and "ipsw" with "--no-baseband"
Ok for some reason it put quotes on the ipsw
if you dragged and dropped it in, that's normal
Hmm didnt for the others
screenshot?
Enter?
yes
Done
your apple TV will reboot and you'll see the restore link on your screen
this is normal
Yup
Done
cool, now in the second CMD window, hit enter
Damn
hmm?
oh, that's fine.. here i'll give you the files needed
you can copy/paste these links into your windows browser
yeah
In the new window yes
after typing that in.. CMD should say: C:\Users\Bob\Desktop>
yes
okay
so now type: curl -O http://joshtv.net/13.4.6/BuildManifest.plist
thats a Capital O
next one is curl -O http://joshtv.net/13.4.6/sep.im4p
and then you'll have both files on your desktop
after that's done, replace "--latest-baseband" by dragging BuildManifest.plist into the cmd with futurerestore
but add "-m"
so for eg: -m /path/to/buildmanifest.plist
same thing for the .im4p file, just replace "--latest-sep" with "-s"
so it'll be -s /path/to/im4p
and there's a space in-between "-s" and "/path/"
also with "-m" and "/path"
after that's all done, it /should/ work
Damn again i think
no because Apples not signing them.
Sorry was hoping was a mixup lol so now what is wrong?
I know what the problem is, but since you've got the HD.. it'll be a little more difficult
Do you have the old apple tv remote?
for the 2nd/3rd gen?
No
i'll tackle the issue later on.. give me like a day to figure it out
for now, if you want to get your Apple TV out of recovery, just hook it up with a USB cable and run /path/to/futurerestore.exe --exit-recovery
and your Apple TV will reboot normally
no, the other window
Ok
Ok well did that says error code 2
And yah thanks for all the help def owe ya
@fleet parcel
Error missing argument
Got it nvm @fleet parcel thanks again
Ok weird. unplugged atv then replugged and ran checkra1n error 92. No checkra1n installer loaded and no nito so i reran checkra1n same error but now nito is there and working but still no checkra1n installer
When nitoTV is installed, the checkra1n loader won't appear. All you need to do is run checkra1n and if nitoTV appeasers, you're jailbroken
The loader only comes up to install nitoTV and the bootstrap
XCode cannot sign in to provision profile. Is it down?
cannot log in to Developer's account
@icy wolf WWDC right now..
Hi everyone. I have an ATV3,1 (A1427) and I've been reading about how to JB. Cool stuff. However, my main objective would be to use this box as an IPTV client (already have M3U). Are there good quality IPTV apps in nitoTV for this model?
@buoyant cape No.. You're thinking tvOS (Apple TV 4/4K)
Ah, that sucks. I won't bother jailbreaking it then.. Thanks!
@buoyant cape you can still do more exciting stuff
Well most of the services I use are already working fine.. Netflix, Prime Video, etc.. It's just IPTV what I'm missing on it
You /might/ be able to accomplish that on Kodi
Hm, that's true. I've never used Kodi for that particular usage, let me read a bit about it and if so then I'll go ahead. Thanks!
@icy wolf WWDC right now..
@fleet parcel Thank you
@haughty thorn No-go on tvOS either...
First glance tvOS 14 sounds lightweight in features so I do not expect any new hardware to be launched along side it. The 4HD model gets another year of support too. Fine by me I am happy with the current OS. The big news was macOS and departure from Intel.
I closed my eyes on installing tvOS 14.. and upon opening them, I thought it was still 13 😛
It took 14 iOS releases for Apple to finally give users the option to select another browser or mail app as a default lol.
You could've done it via shortcuts
Yes, but now it's official via prefs.
I'm a little bummed by the cutoff in Mac support. I have a 2014 MacBook Pro 3GHz iCore 7 that didn't make the cut.
I'm bummed that after 1 year (and some time of quarantine) there's nothing changed for tvOS 14...
tvos still the ugly stepchild? Guess i didnt miss much
You know whatd be great.. if airplay/mirror content was treated as a separate app in the switcher and then we could use something like that supposed netflix pip of yours with it @fleet parcel. Oh, looks like native pip coming? Lol so just read seems they are doing exactly what i just asked for.. nice
Guess 4k gets 4k youtube in 14 lol.. it didnt before?
I restore rootfs and it's telling me I'm up to date went to install tvos 14 and it say's I'm up to date could it still be blocking updates?
on appletv 4k
did a factory reset as well
Noo stay away from tvOS 14 @robust gust
ok can I use xbox elite controller with jailbreka
jailbreak
and how will I update in the future
ok can I use xbox elite controller with jailbreka
@robust gust Yes with nControl
ok cool I rejailbroke
Thanks for talking me out of updating
just have to figure out what happens in the future for updating
Hey Guys, getting a bit desperate now. Anyone who can help me jailbreak my appleTV 4k?
fml from atv problems to iphone probs. stuck in bootloop
what's your issue @wispy pilot
well fuck
my AT4K is in a bootloop
is there anything I can do?
i rebooted it while having unc0ver b2 installed
i had the latest nitotv installed...
@trim wagon you could try this https://reddit.com/r/apple/comments/7y835c/_/duf997m/?context=1
44 votes and 20 comments so far on Reddit
good luck @trim wagon i was just able to fix my iphone bootloop, thankfully was able to go into recovery and update in itunes
without restoring
just called apple support, they'll come for the device and try to reflash the software
if it's a hardware issue (i doubt they'll say so), they'll charge me for it
@topaz pollen the answer you seek is in the pin
@trim wagon its not a hardware issue. Apple will replace it free of charge, but that could've been fixed if you had it modified with either checkra1n or used the cables
@wispy pilot I could help you out, but I don't know what the issue is
that's a pain in the butt tho
i suggest to pin the bricking issues or at least ping people in here who don't have the latest unc0ver/nitoTV installed
That's just it @trim wagon - I don't know who does and most of the ppl don't read the pin

:(
Your issue is easily fixable ( i know how to make it great again)
but if you don't have the right adapters for it.. may have to get Apple to replace it
yeah unfortunately i don't but I guess I'll get them if this happens again
Do you know what version of nitoTV you had on there by any chance?
-also, unc0verTV was updated out of beta (5.2.0) which resolves the issue (was resolved in b3)
yes, unc0ver was still b2 for me
I was actually going to update it just thought I'd reboot to have a "clean slate" lmao
oh? What did you do exactly for the issue to occur?
like the app or restore root fs?
@slender flumev does ncontrol work with apple arcade games?
yup, unless the devs disabled controller support
ok thanks
I removed the app via xcode
ah ok
The latest version of nitoTV does fix this issue.. How it happened to you (with the latest update) is beyond me, but hopefully it doesn't happen again with your replacement @trim wagon
regardless it’s better to update unc0ver to be safe
yeah, next time just update and rejailbreak without rebooting, that worked fine for me
yep, i guess so
@fleet parcel so I bought ncontrol and works pretty good with my xbox elite series 2, one game I cannot get working is dead cells works with my standard xbox controller
is that on the app store?
Yes
ah, I'll take a look. What tvOS?
is it on u0? or checkra1n?
u0
Have you tried youControl?
no what's that?
So I have Reprovision set to sign u0 on my 13.4.5 boxes with 5 days remaining and today I noticed 2 days were left. It didn't auto sign even though the preference is enabled. Reprovision did do the signing manually though. Is the auto sign a known issue?
any good repos for the apple tv sorry i just jailbroke
So far, the ones you have
okay perfect so im not missing out
and good tweaks to look at or is kodi about it
how can i update my jailbroken apple tv with mcpatch @fleet parcel
why are you updating?
its on 11.2 i just wanna get on 13.4.8~b1
not possible.
so no way to go higher on a jailbreak?
is it the 4K?
yes
yeah, no go
dang
unless you have the special cables or the breakout board (must be soldered), then you may update and jailbreak it
dang okay thank you!
but 11.2 is jailbreakable, so you're still good
yeah its jailbroken
i just thought the tweak mcpatch would help
that’s for blocking updates
13.4.8b1 is not signed anymore
ahh so im just stuck on 11.2
with?
do you have virtualization enabled in your bios?
enabling virtualization let it run
but its stuck at apple boot screen and gave me this error
The CPU has been disabled by the guest operating system. Power off or reset the virtual machine.
try it again
@fleet parcel feel like trying to help with futurerestore again or am i sol
Well its certainly possible.. the only downside to it is that checkra1n can't really set a nonce
however, if you had an apple tv 1/2/3 remote, you could easily downgrade
Ther some kind of button combo only that remote can do or something
no, its the fact that backr00m is the best option to set the nonce
but if you downgrade the HD, your siri remote won't work
And thats because of checkra1n or any downgrade will break remote?
Dang
Ohh so ur asking about the old controller just so id be able to control the tv after downgrade? Or its needed for backr00m
yes
because once you downgrade the HD to 10.2.2, the siri remote won't pair
hence why the old remotes would work
even the old Apple TV 4 remote will work
just not HD or 4K
Wait 10.2.2? I thought i was good for 13.4.5
By old do you mean the one without the light or whatev around the button. Cuz i have the one before that
it has to be the remote without the white circle
Yah i have that one
Nice
So then you do have a shot of getting u0 back after all 🙂
Wait off topic, is there any difference between the hd and 4 besides the remote
Ah yah i meant consumer wise. Like hardware differences
Hah yah. Ok cool well yah i have the ugly remote then
cool, would you like to get to 13.4.5 now?
Well yes eventually. And if ur up to helping rn then sure
For sure lets give it a go
okay. Connect your HD to the puter
download the tvOS 10.2.2 firmware
do you have a way of sideloading apps?
like a mac?
... no mac
the one thing stopping you is the ability to sideload...
And mac is the only way huh
yeah.. the only official way
you could try to emulate macos
Yah if and when i get that going ill ask again
So close but so far
Ok new question. How about mr jump happen to figure that one out? Or sol on that too
mr jump needs to be updated
Tvos firmware compatibility issues?
I dunno about that.. hold on I'll try something..
This channel is literally just alternating messages from a person and JTV
Does it work and then crash though after you close it
not at all
Hmmm mr jump or updated tvos.....
but i'm gunna try something..
Welp downloading macos on my strugglenet now. Hopefully can try futurerestore tomorrow
hopefully it works...
Would this not work for what were trying to do
https://twitter.com/halo_michael/status/1203370454460727296?s=21
[Release]: Generator Auto Setter
Auto set your generator when jailbreaking!
Only Support Checkra1n. (Because other jailbreak tool doesn't need that.)
It's on my repo NOW: https://t.co/3s6kbw0vhc
154
no, because the dependancies it needs in order to work aren't on tvOS
@fleet parcel hi I need help
with?
I have an Apple TV and I have a USBC to iPhone charger
Is there a way I can charge my phone using that charger to my Apple TV 4

Is it possible to work
Darn
fortunately apple is sending me a new apple tv...
i wonder, do I also get a second remote now? 🤔
yes, let's see...
oy
@fleet parcel
if ure free anytime can u gide me thru the vmware install really quick tried it with vmware and virtual box and it wont lauunch macos
there's a script on github which sets up macos in virtualbox for you
I can recommend it: https://github.com/myspaghetti/macos-virtualbox
won't work if you have a ryzen tho
unless they fixed it
Y'all need Macs 😝
rip
so is it not possible at all with ryzen
might just have to borrow a friends mac then
@fleet parcel is there any aftermarket restore cable for apple tv 4k not the breakout cable?
@robust gust someone tried checkra1n with Golden Eye cable + DCSD box but checkra1n bootlooped his ATV and Apple had to restore/replace it
so I don’t think there’s anything else working atm
@analog elk I tried to restore rootfs and update my Apple TV and it won’t find updates I plan on keeping it jailbroken for now but concerned for the future will Apple have to replace it if I can’t update in the future? It just says it’s update to date even reset guess it does not matter right now
Nah
@analog elk what happened was, they tried to update, but the update failed mid-way (probably due to not using restore root fs and forcing it via DFU)
@analog elk what's the question?
@midnight kiln borrowing a mac would be highly ideal
@fleet parcel oh hmm
you can do a lot of damage with those cables if not used accordingly (especially resetting on a jailbreak).. so heed caution if/when buying/using
@fleet parcel How would one downgrade from a beta on the Apple TV 4k
Welp
What happened?
yeah, I'd stay away from 14 imo
Apple really fucked developers with the Apple TV 4k
not devs per say, but jailbreak enthusiasts.. yeah
Devs are screwed if they need to go back to a release
Actually they probably expect devs to have multiple devices
"The legacy build system is deprecated, and will be removed in a future release" shit
Well Kodi will eventually not be able to be built in Xcode or will have to change it's build system
and update xcode if using 14...
Yeah
"Simulator can display a simulated device in full-screen mode, or tile its window alongside Xcode" finally
"Simulator defaults to the internal microphone unless you explicitly choose a different audio source. This avoids triggering phone call mode on Bluetooth headsets which degrades audio quality while listening to music." lol
"Simulator supports simulating Nearby Interaction for devices that support the feature. Dragging the device window around on the screen will update the simulated distance between the two devices. The farther apart the windows are on screen the greater the reported distance." wow
That last one requires an iPhone 11 or newer
my appletv keeps disconnecting briefly from my network and reconnecting which causes a ton of disruptions, is there anyway I can reset my network settings or fix this
when this is happening, i click on wifi to switch my network and it wont find a list of other networks, it'll just keep loading. once the network list loads my internet is fine again
I swear I remember reading that opting out of the beta and doing a factory reset would reinstall the latest stable tvOS (so 13.4.6 in this case) but I may be wrong
nahh
@fleet parcel got macos running. Down to help me give it another go
okay, download and install Xcode
either-or
Saying i need macos 10.15.2 or later
try 10.1
Xcode 10.1?
yes
Ok be a lil bit while it downloads
Damn xcode larger than the catalina zip
Anything else i can do/download in the meantime
Yeah, use iTunes to get to 10.2.2
Yes
Ok on 10.2.2
Few more minutes for xcode
Ah the good ol days when i could connect my atv to my hotspot and use airplay without being forced to mirror
@fleet parcel ok xcode downloaded
Install it
Cool
Did you downgrade your apple tv?
Yes
Ah, were you able to set it up?
Yes
Oh good
App store on 10 should work
Works as far as everything loads but downloads failing
But maybe thatll have no consequence?
You won't need to, just connect it via USB
You can even unplug it and plug it beside your puter
I mean there is no “pair” option
In mac? Or Apple tv
unc0ver tv windows 10?
do u still need a mac for checkra1n
No, Macs aren't required for checkra1n
Checkra1n works for Linux too
@jaunty rune did you plug the apple tv in to your puter?
Yup
Look inside the USB settings on the vm
You may have to select your apple tv
From there, Xcode will see it
@fleet parcel was able to connect to airplay in music
Thats the only place i see the atv
Checkra1n works with normal windows right
do you guys know any good repos for tvos?
Vmware
Does the apple tv show up in system profiler?
screenshot?
looks good. Open Xcode
Open
Create new?
Did you follow my guide?
go into terminal
password is the one you made when you set up your mac
yes
Ok its downloading but at same time popup for updates available
Install that or wait
Ok needs a bit to download
that's ok
Hung at installing so far
give it time
Could i run it again? Said could not install but think something else happened. With my network or something
maybe
Ok did that and says command line tools already installed use software update to install updates
“Software Update”
Well it said “use “Software Update” to install updates”
tis okay. See if Xcode picks up the Apple TV
Damn nope
Still showing in info
Restart appletv? Grasping straws
Ok does it matter at what point i go to window>devices? Seems the guide misses a part of what im seeing happen
Restart the apple tv
Nope
Go to Apple TV settings
Remotes and devices
and see if it pops up in Xcode there in Devices and simulators
yes
Should i connect the atv or pc to ethernet. Or all on the hotspot is fine?
Yah still no go wifi or hotspot
Dont want to keep torturing you hah im prob just gonna give other vm a shot some point
Maybe bad xcode? Or should it still be showing up
use ethernet
Yah puter connected to ethernet atv wifi
your ethernet for apple tv has to be on the same network as your puter
when you go to Devices and Simulators, what does it show?
Nothing blank
is the apple tv plugged in via USB?
Yes
Vmware showing when its connected and not. Shows and disappears in apple device info accordingly
Could it be the xcode i installed?
very odd
Was reading somewhere something said about connecting from tvos setup. Should i reset?
Instead of remote app and devices
nah
if you go into remote app and devices, then remote app, you'll see the mac pop up.. if not, back out and re-enter
Iphone not showing in devices either
plug your iphone into mac and see if xcode sees it
Thats what i mean xcode doesnt see it
Iphone shows up in remote app and devices on tv though lol
do you have your apple tv plugged into power?
Yes
I'm trying to figure out why you're running beta on mac/xcode...
your macOS is in beta.. is it not?
I guess so
Just what i grabbed from the tutorial i used makeuseof
I see therein lies the problem?
screenshot?
restart the mac
Will do more than likely do it tomorrow if it doesnt take that long anyway
Ill let u know if it finds the tv
ok
Thanks again seriously hah
no problem
Is this for apple tv? And what can u acc do with it
@analog elk yes and your answer is in the pins
Oy would mac in cloud work or no
Wdym?
Like instead of borrowing a mac for xcode theres a site called macincloud that lets u use a mac over their cloud or something liek that
i dunno how that'll work when you need to connect an apple tv to your network...
got my replacement unit, it's on 13.0 👌
@trim wagon awesome
Feel free to use u0 5.2.0
then update nitoTV
but don't touch the "Disable Updates" in nitoTV. Leave that area alone
@fleet parcel does the latest Reprovision auto re-sign work on 13.4.5? I can manually get it to sign but it's not doing it on it's own. Do I need to roll back to an older Reprovision version or something?
ReProvison still needs work
13.4.5 messed with a lot of things and so far, its been reported working with a handful of users
hmm, ok. I have it running on 4 devices on 13.4.5, HD and 4k, and it doesn't auto-sign.
I wouldn't depend on auto signing.. just wait like 5 days and click it
@fleet parcel any possibility of bringing this to TVOS? https://www.reddit.com/r/jailbreak/comments/hi2w6q/free_release_freemote_bring_betterttv_emotes_to/
i knew the last one couldnt but worth a shot at asking 
maybe..
i know twitchy used to have it but they got killed off when twitch released their app 
@fleet parcel finally
@fleet parcel lol had to change usb compatibility in usb controller settings in vmware to 2.0 instead of 3.1.
ah
I tried this other day but wouldnt let me
ready to go to 13.5? 😉
did you manage to jailbreak yet?
Yah
cool, SSH in
Matter from where?
mac would be best
press enter
Done
next, type: nvram auto-boot=false
Done
now. make a new terminal window
do you have futurerestore downloaded?
Yah but on my pc

