#Fractal Ridge, Watercooled 7900X3D, Deshrouded 7900 GRE

4 messages · Page 1 of 1 (latest)

autumn fog
#

Just wanna show of my new Ridge build, it was a pain in the ass to squeeze everything in.

Parts list: Fractal Design Ridge Silverstone Vida 240 Slim Cooler Master V850 SFX 80 Plus Gold Asus B650E-I Crucial Pro DDR5 6000mhz 48GB Ryzen 9 7900X3D XFX 7900 GRE Crucial T500 2TB 2x Crucial MX500 2TB Intel X540-AT2 1x Noctua NF-A4x10 FLX 2x Noctua NF-A9x14 2x Thermalright TL-8015

To fit the radiator I deshrouded the GPU and fitted 2x NF-A9x14 fans in a pull configuration rather than push, the 2 thermalright fans are on the top configured as an Intake. The radiator fans are between the rad and GPU in the same orientation as the GPU fans so the to intakes blow air over the GPU and both the GPU and Rad fans exhaust air through the radiator. The NF-A4x10 is for the Intel NIC, that's what is covered with electrical tape, just to make sure it doesn't short out on the side panel. I'll figure out a better solution in the future.

GPU Temps: 20 minutes of furmark and core maxes out at 70c with max hotspot of 90. This is with +15% power limit so it's drawing 332w.

CPU Temps; Before I had the Noctua L12S and that struggled, the CPU would hit 89c and the power consumption would drop by 20w so I just capped it at 95w which is basically what the L12S rated for. With the Silverstone AIO it just stays at it's TDP of 120w and maxes out at about 86c. My Cinebench R23 scores went up by 2k.

1

2 Comments

civic jacinth
#

nice build

#

btw what do u think about the PSU

#

do u think its loud