#Hello everyone I have a Aeotec Z Stick 7

1 messages · Page 1 of 1 (latest)

pine coyote
#

Example of the log: 2022-07-08T18:12:02.105Z SERIAL « [DISCARDED] invalid data 0x0d0a4765636b6f20426f6f746c6f616465722076 (64 bytes) 312e372e310d0a312e2075706c6f61642067626c0d0a322e2072756e0d0a332e2065626c20696e 666f0d0a42 2022-07-08T18:12:02.110Z SERIAL « [DISCARDED] invalid data 0x4c203e20000d0a4765636b6f20426f6f746c6f61 (64 bytes) 6465722076312e372e310d0a312e2075706c6f61642067626c0d0a322e2072756e0d0a332e2065 626c20696e 2022-07-08T18:12:02.116Z SERIAL « [DISCARDED] invalid data 0x666f0d0a424c203e20000d0a4765636b6f20426f (64 bytes) 6f746c6f616465722076312e372e310d0a312e2075706c6f61642067626c0d0a322e2072756e0d 0a332e2065 2022-07-08T18:12:02.122Z SERIAL « [DISCARDED] invalid data 0x626c20696e666f0d0a424c203e20000d0a476563 (64 bytes) 6b6f20426f6f746c6f616465722076312e372e310d0a312e2075706c6f61642067626c0d0a322e 2072756e0d 2022-07-08T18:12:02.127Z SERIAL « [DISCARDED] invalid data 0x0a332e2065626c20696e666f0d0a424c203e2000 (64 bytes) 0d0a4765636b6f20426f6f746c6f616465722076312e372e310d0a312e2075706c6f6164206762 6c0d0a322e 2022-07-08T18:12:02.131Z SERIAL « [DISCARDED] invalid data 0x2072756e0d0a332e2065626c20696e666f0d0a42 (25 bytes) 4c203e2000 2022-07-08T18:12:03.103Z CNTRLR Failed to execute controller command after 1/3 attempts. Scheduling next try i n 100 ms.

rotund valve
#

did you tell the stick to load the firmware and start?

pine coyote
#

im not sure how to do that lol

#

i followed their instructions

rotund valve
#

it's in the menu when you have minicom going

pine coyote
#

run?

rotund valve
#

sounds right

pine coyote
#

ive tried that and it gives me an unresponsive blank terminal

rotund valve
#

that's fine

pine coyote
#

im not sure what thats suppose to do

rotund valve
#

runs the firmware

pine coyote
#

i opened another terminal and try to run zwavejs2mqtt but the same thing happens

rotund valve
#

you're seeing this menu?

Gecko Bootloader v1.5.1
1. upload gbl
2. run
3. ebl info

right?

pine coyote
#

yeah

rotund valve
#

When the upload finishes, select option 2 in the bootloader menu to run the new firmware. Some garbage characters will appear, meaning the firmware is running. Exit minicom with CTRL-A q and select Yes to exit.

#

once you exit minicom, then run zwavejs2mqtt

pine coyote
#

oh man thank you!

#

that part was missing from the docs lol