frosty hemlock
Hi,
Today I received my Aqara FP300 and the TI CC2652P Zigbee coordinator. I ordered that coordinator because it was on the ZHA recommended list. But I’m having problems.
I used the Aqara Home app to put the FP300 in zigbee mode. After a few pairing attempts in Home Assistant I was able to get it connected with the custom quirk for it.
But now it seems to keep losing connection. It was fine for like half an hour. I could adjust settings in HA and everything. But now it’s having issues. The FP300 isn’t showing any lights to indicate it’s disconnected from the Zigbee network. But any setting or command I try to send from HA results in an error Failed to send request: Failed to send request: <Status.NWK_NO_ROUTE: 205>
So I’m wondering if anyone knows a fix? The coordinator is connected to my NAS via a USB 2.0 extension into a USB 2.0 port. I’ve then ran the extension and adapter higher up a wall. Not sure if it’s of any use but for reference the NAS is the Ugreen DXP 4800Plus (upgraded to 32GB of RAM) and Home Assistant OS is running in a VM. The FP300 is in an office about 2 rooms over from the closet where the NAS is. I have no other zigbee device to test with.