So basically what the title says, the issue is that at some point in the middle of the night it just stopped responding. So I rebooted it, checked a few things, reseated everything I could, and that still hasn't fixed the issue. I plugged into the network, I tried plugging it into different places, into different cables, and that still hasn't fixed it.
#Home Assistant Yellow Stopped Responding via the network. Lights show normal
summer fiber
placid vine
Can you connect to it via serial? https://support.nabucasa.com/hc/en-us/sections/24979689823901-Troubleshooting
summer fiber
working on that now
summer fiber
Can you connect to it via serial? <https://support.nabucasa.com/hc/en-us/section...
I was able to get it connected but I can't get to a login. All it does is get me text from the log output I guess.
I was wrong that was an esp32 I was working on
The usbc does not bring up a COM port
placid vine
You might need the drivers. Should be these according to the picture: https://www.silabs.com/software-and-tools/usb-to-uart-bridge-vcp-drivers?tab=downloads
Also the JP1 may need to be changed.
placid vine
Any luck?
summer fiber
no luck. Just ordered a green with the zigbee and zwave
Thanks for the help. I'll try again tomorrow and see if I can get the usb to work.
placid vine
I would have recommended something else: https://gist.github.com/Impact123/6ee130240bdc6a7fed2d5224616544a0