The image is my current zigbee2mqtt setup. Is it possible to get “Temp sensor gang” on the coordinator? Its currently using the dongle i setup as a router to extend my network. however the sensor is almost next to the coordinator
#Zigbee router
hollow pier
heady ridge
most zigbee devices will automatically move themseves around depending on signal conditions. if there isn't a problem, i wouldn't recommend doing anything.
you can try removing it and pairing via a specific device: https://www.zigbee2mqtt.io/guide/usage/pairing_devices.html#pairing-via-a-specific-device which should cause it to initially use the selected device as a parent, but it won't necessarily stay there
hollow pier
Alright thanks! Its the same for the temp sensor buiten. its closer to the “nis douche” and quite far from coordinator. (linq quality is about 80 rn)