upper rock
Hello, I already have several Smart Zigbee sockets that deliver ‘Summation delivered’ in kWh via ZHA to Home Assistant, and these are displayed in the Energy Dashboard. Now I have two new IKEA INSPELNING sockets, and these are not displayed in the Energy Dashboard. While debugging, I noticed that the unit_of_measurement attribute is missing from the ‘Summation delivered’ sensors. I assume that this is the problem? Is this a problem on my side or on ZHA's side?
Best Regards
pattyland
half charm
What inspelning firmware are you on?
scarlet spire
This is a known bug in the firmware. Try to update it to the latest firmware version. I have never had such problems with the latest firmware.
upper rock
Thank! I just updated to 0x02040045 and it's working 
half charm
Should the inspelning have issues with a airfryer, for a half hour or so? It ran 2000 watts, and then the airfryer suddenly was without power. I saw the led blinking and the plug felt warm/hot. Specs say it can take 16a, 3600 watts? So the 2000 from the airfryer shouldn’t be a problem right?
I’ll take it to ikea nontheless, but was wondering if someone else had issues before?
boreal crypt
Should the inspelning have issues with a airfryer, for a half hour or so? It ran...
I had a similar issue with Inspelning that shut off due to overheating.
The poor quality airfryer plug was warm/hot and was transmitting the heat to the Inspelning.
IKEA Inspelning overheat protection worked fine and after cool down its operation returned to normal.
I replaced the plug with decent material and it never felt warm/hot anymore
FYI, specs mention 3600 Watt as peak power for a short period of time.