#Is this possible?

1 messages · Page 1 of 1 (latest)

empty rain
#

Hello everyone,

Just a quick question,

I'm in the middle of a house rewire putting Sonoff Switchman Zigbee through the property with neutrals throughout.

The front door switch will control Philips Hue porch lights.

I'm wanting to put a LED house number sign on the same circuit but it'll be constantly powered on due to detached relay in the ZBM5.

I was wondering if I could put another Sonoff Relay on the same circuit as the switch, at the end of the circuit which will turn the LED house number on/off with a Zigbee command with HA?

So in theory, can I have multiple relays on the same circuit without causing issue?

Im guessing because neutral is present, it won't be an issue? Maybe I'm over thinking it 😅

I know the wiring isn't correct in the diagram

IDEA.jpg
fast cave
# empty rain Hello everyone, Just a quick question, I'm in the middle of a house rewire pu...

so the switch bulb and relay are all powered on by the circuit
the switch is detached so it doesn't actually physically switch anything.
the switch sends zigbee command to the bulb to switch on/off
and then you have the ability to switch the relay to turn on/off the door number.

yes this looks like it should be fine. other than obviously you have the live in and out reversed in your diagram 😛

empty rain
fast cave
#

could have reversed the order of the devices too 😛

#

@empty rain also, worth pointing out... is that a dummy address for the example? or did you accidently dox yourself?

empty rain
fast cave
empty rain