I ran into an issue where i needed to restore a backup of my zigbee USB sticks settings, (home assistant brought forward the issue and let me know to click the button to restore), but upon trying to, i got:
zigpy.exceptions.CannotWriteNetworkSettings: Please upgrade your adapter firmware. Firmware version 0x26580700 does not support writing the network key frame counter, which is required for migration to succeed.
and an error dialog in the UI, how does one go about upgrading the firmware of the USB stick, my HA is running via HAOS on proxmox with the USB device passed through (if that makes a difference) (will also be googling at the same time after posting this)
#Conbee 2 firmware upgrade
nimble holly
oh, running ZHA right now as the addon for running zigbee
nimble holly
nimble holly
homeassistant.exceptions.HomeAssistantError: Failed to connect to Zigbee adapter:
great, two shutdown / bootup cycles later
still happening
🤦♂️ and i can't use lsusb on haos, but the host sees the USB adapter at least
ha hardware info probably has that, but it scrolls by so quickly and theres no | less or anything else that i can find in the no docs there are available
😐 i might just be annoyed by it
okay the UI had the HW info, with the conbee usb listed, the integration is using the /de/serial/by-id location thats shown in the hardware listing, so it didn't change its location that HA should be using, so i have no idea why its not connecting
i guess i'll backup + try to mess with the integration settings to maybe get that to connect again, just worry the backup button will disappear from the issues page and i have no idea where to get the file or trigger the restore for the network
nimble holly
welp, tried a few versions of the firmware, none were successfull for HA to use 😐 why is zigbee so annoying