sage crypt
Hi All, I am trying to add Matter devices to my home assistant since adding a ZBT-2 I have this setup as a zigbee adapter not a thread adapter. (as far as I can tell) However every time i try to add a matter device now it states "something went wrong" in the home assistant addition step. and shows this in the home assistant log
2025-12-04 23:26:27.817 (MainThread) INFO [matter_server.server.device_controller] Starting Matter commissioning using Node ID 22 and IP fe80::c6e7:aeff:fe1d:39f2%enp0s18.
2025-12-04 23:26:31.742 (Dummy-2) CHIP_ERROR [chip.native.EM] <<5 [E:341i with Node: <0000000000000000, 0> S:0 M:91088143] (U) Msg Retransmission to 0:0000000000000000 failure (max retries:4)
2025-12-04 23:26:38.278 (Dummy-2) CHIP_ERROR [chip.native.SC] PASESession timed out while waiting for a response from the peer. Expected message type was 33
2025-12-04 23:26:38.279 (Dummy-2) CHIP_ERROR [chip.native.ZCL] Secure Pairing Failed
2025-12-04 23:26:38.279 (Dummy-2) WARNING [chip.ChipDeviceCtrl] Failed to establish secure session to device: src/controller/python/ChipDeviceController-ScriptDevicePairingDelegate.cpp:96: CHIP Error 0x00000003: Incorrect state
2025-12-04 23:26:38.280 (MainThread) ERROR [matter_server.server.client_handler] [140564705465632] Error while handling: commission_on_network: Commissioning failed for node 22.
Sorry no doubt this has been asked 1000 times before but im pulling my hair out! as i could add matter devices before adding this adapter, and even if i remove it i now still cant add matter devices