How do i set update rate for zigbee usb device?

[wheat siren]

I just setup ZBDongle-E by sonoff, and it hooked up fine, but appears it'll only update once an hour by the looks of it. How do i change update rate? As i want it to read current power per second.

[raw steeple]

Update rate for what?

[wheat siren]

Oh, my apologies. I meant for the zigbee devices that will be read/send the information.

https://www.ikea.com/no/en/p/inspelning-plug-smart-energy-monitor-00569836/

These in my case.

As i wanted these for pretty much live readings.

Power for instance reports often enough to where i can flick a lightswitch and see the changes almost live.

But inspelning is way too seldom updates. As i need the report to be preferably once a second, or every 10 sec, 1 minute, not once every 1-3 hours :P

[raw steeple]

@wheat siren you would want to adjust the reporting settings for the plug. Are you using ZHA or zigbee2mqtt (or something else)?

[wheat siren]

ZHA. Just migrated over to HA OS in a VM on my unraid server.

[raw steeple]

I'm not sure how to adjust the reporting settings for devices in ZHA unfortunately, but somebody else probably does

[wheat siren]

Do tell what you use and how you'd adjust it if doable, and i can find out if i can use that method instead :)

[raw steeple]

I use zigbee2mqtt, so those instructions wouldn't be useful