#ZBT-2 with Zigbee2MQTT on Synology VM

1 messages · Page 1 of 1 (latest)

vagrant path
#

Has anyone managed to get Zigbee2MQTT working on a Synology VM? I keep getting an error. Logs below. The configuration seems correct.
Configutation:

data_path: /config/zigbee2mqtt
socat:
enabled: false
master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: "-d -d"
log: false
mqtt:
server: mqtt://192.168.1.201:1883
user: mqtt
password: ********
serial:
port: /dev/serial/by-id/usb-Nabu_Casa_ZBT-2_9C139EAD31F0-if00
adapter: zstack
baudrate: 115200
rtscts: false

LOG:
Onboarding page is available at http://0.0.0.0:8099/
[17:20:24] INFO: Preparing to start...
[17:20:24] INFO: Socat not enabled
[17:20:24] INFO: Starting Zigbee2MQTT...
Starting Zigbee2MQTT without watchdog.
Onboarding page is available at http://0.0.0.0:8099/
[2025-11-23 17:21:39] info: z2m: Logging to console, file (filename: log.log)
[2025-11-23 17:21:39] info: z2m: Starting Zigbee2MQTT version 2.6.3 (commit #unknown)
[2025-11-23 17:21:39] info: z2m: Starting zigbee-herdsman (6.3.2)
[2025-11-23 17:21:39] info: zh:zstack:znp: Opening SerialPort with {"path":"/dev/serial/by-id/usb-Nabu_Casa_ZBT-2_9C139EAD31F0-if00","baudRate":115200,"rtscts":false,"autoOpen":false}
[2025-11-23 17:21:39] info: zh:zstack:znp: Serialport opened
[2025-11-23 17:21:39] info: zh:zstack:znp: Writing CC2530/CC2531 skip bootloader payload
[2025-11-23 17:21:41] info: zh:zstack:znp: Skip bootloader for CC2652/CC1352
[2025-11-23 17:21:59] error: z2m: Error while starting zigbee-herdsman
[2025-11-23 17:21:59] error: z2m: Failed to start zigbee-herdsman
[2025-11-23 17:21:59] error: z2m: Check

#

[2025-11-23 17:21:59] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions
[2025-11-23 17:21:59] error: z2m: Exiting...
[2025-11-23 17:21:59] error: z2m: Error: Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)
at ZStackAdapter.start (/app/node_modules/.pnpm/zigbee-herdsman@6.3.2/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:115:27)
at Controller.start (/app/node_modules/.pnpm/zigbee-herdsman@6.3.2/node_modules/zigbee-herdsman/src/controller/controller.ts:133:29)
at Zigbee.start (/app/lib/zigbee.ts:67:27)
at Controller.start (/app/lib/controller.ts:101:13)
at start (/app/index.js:149:5)

Zigbee2MQTT fails to start/crashes runtime | Zigbee2MQTT

Zigbee to MQTT bridge, get rid of your proprietary Zigbee bridges

fringe flame
#

It is not a zstack adapter. You should use ember

#

It's also the wrong baud rate

#

Should be 460800

#

rtscts: true

vagrant path
vagrant path