worthy nebula
Hey I'm new and need some recommendation for a zigbee relay.
I want to set up a 2 gang 3 position each (4 total button presses) momentary wall switch(230V 50Hz) to control a light(most likely a dumb light, haven't picked the light yet) with dimming (maybe color temperature) over zigbee in HA.
Wall switch and zigbee module relay will be separate. The main reason for that is aesthetics, so all wall sockets and switches in the room match in color and style.
I want it to work like this:
- single press (right down button) change the state of the light on/off.
- long press (right down button) lower the brightness
- long press (right up button) raise the brightness
And turn other zigbee devices remotely with other types of presses on the left gang/button. - After power outage i want the switch to remain in the last state.
- I don't have much space in the socket box so something small would be ideal.
Is it possible to use the wall switch normally without HA or since its momentary switch this will not work?
What zigbee switch/relay will be appropriate for this job?
The wall switch in question:
https://www.kontakt-simon.com.pl/en/Catalogue/758/2139/17667,DP4.01_11.html
or this one:
https://www.kontakt-simon.com.pl/en/Catalogue/1227/2071/4357,TP4.01_116.html