SLZ-06 powered over POE and z2m keeps crashing.

[rich hinge]

My connections are great but every once in awhile the add-on stops and can't start. I've noticed when it happens which isn't every night but it happens around 3:00 am when I check the logs and that time is pretty consitant. I have a copy of the logs I can share but my other issue is I've setup an automation to monitor the state of the add-on and notify me but it never triggers and I've also setup one to auto restart if it crashes and that one doesn't either. Anybody have any ideas where to start?

By the way my SLB-06 stays up and running because when I checked it shows an uptime of 9days 20hours because that was the last time I updated. It shows the Z2M uptime as only 2hours since that's when I manually restarted the add-on.

[violet sapphire]

can you verify ip address vs. z2m config? and best way is to set slz06 to dhcp/automatic ip and make a reservation for static ip for slz06 in your router.

then reboot slz06 and haos

Also check for double ip's in network.

[rich hinge]

I have DHCP turned on and have the SLZB in my network setup with a fixed IP Address of 192.168.1.170. I've got my z2m addon pointed to 170 as well. Am I missing something or done something wrong per these pics?

I also checked and nothing else on my network is using the address of 170

[violet sapphire]

what does the mqtt section say?

off for today, others will pick it up. Good luck

[rich hinge]

I have nothing there. What should be filled out because this is my first time setting up anything MQTT

[violet sapphire]

just checking, is your issue solved? otherwise (if no special needs for zigbee) try to switch from z2m to ZHA on both HA and slzb06, and see if that helps?