Hello everyone, I need some advice or guidance with a specific problem:
I've an ems-esp for our Bosch CS5800 heat pump. I've been able to successfully transfer the values to Home Assistant via MQTT (Mosquito Addon). However, every time I restart the MQTT or HA, I get incorrect values in the various entities, and this happens every time. Each time, a smaller value is delivered first, followed by the correct value, e.g., for the total energy or total runtime. This leads to a reset of the counters in the HA statistics. The correct value delivered afterwards then leads to a peak in the statistics. At first, I suspected the MQTT-Server. However, this behavior only occurs with the ems-esp. I did not notice this with the values also transmitted via MQTT from the wallbox (Warp3). Does anyone have any idea what might be causing this and how to fix it? I can repair the statistics each time I restart things, but that could not be a permanent solution.
Best regards,
Michael
#EMS-ESP delivers wrong values on MQTT or HA restart
limpid spoke
pine flare
Look into retain for some of those.