TS0014 Tuya delay

[fierce cosmos]

Got some ZigBee smart switches that are identified by the coordinator as TS0014 Tuya. Most of the time they work instant but sometimes there is 10-60 seconda delay between toggle action in HA and turning light switch on. Same for dumb switches connected to it. Any help needed (what logs to provide and from where).

[spare stirrup]

check networking channels wifi and zigbee.. overlap?? also check signal strenght per device in zigbee map. Use extra routers (e.g. lightbulbs) for the weak parts and areas of your zigbee network

[fierce cosmos]

I can send my map or give link values, they seem okay.
I just tried to change state directly in device exposes and got error:
0x28dba7fffee92c84/set: Cannot send, WebSocket not open
Went to dashboard and from there it started working.
I have 0 wifi devices all ZigBee.
Can I force this device to connect directly to coordinator or closer router because it seem to choose longer route for some reason maybe there is a problem

The switch is in same room as coordinator and there is a socket acting as router too, but it choosen the other socket behind wall instead one of this two points... I'll test and come back with more feedback

[fierce cosmos]

After changes it seems to connect directly to coordinator, hope it will help and stay this way.

It still connected second route (showed as 0) to wrong router (other room) and no route to same room socket router... I'll see how it goes

[spare stirrup]

if you repair the device, you can use the pair with XXXX option, so if you want to pair, select the device (in the drop-down menu) it should pair with.

[fierce cosmos]

So I select > small arrow near allow connections> coordinator/desired router

Then reset device

[spare stirrup]

first remove the device wich is wrongly connected, then re-pair with: > small arrow near allow connections> coordinator/desired router and select the device you want it to pair to

[fierce cosmos]

Thank you, I really appreciate your help