#Xbox Integration not working

1 messages · Page 1 of 1 (latest)

crude shard
remote ledge
#

can you check your internal dns running fine? ping homeassistant.local and see if you get a response.

zealous junco
# crude shard

I have the same issue, Its not critical for me so I haven't put any time into investigating it yet... so whilst this may not be directly helpful, you are not the only one 😛

crude shard
#

~ % ping home.local
PING home.local (192.168.1.108): 56 data bytes
64 bytes from 192.168.1.108: icmp_seq=0 ttl=64 time=5.847 ms
64 bytes from 192.168.1.108: icmp_seq=1 ttl=64 time=82.918 ms
64 bytes from 192.168.1.108: icmp_seq=2 ttl=64 time=20.437 ms
64 bytes from 192.168.1.108: icmp_seq=3 ttl=64 time=89.003 ms
64 bytes from 192.168.1.108: icmp_seq=4 ttl=64 time=100.503 ms
64 bytes from 192.168.1.108: icmp_seq=5 ttl=64 time=11.507 ms
64 bytes from 192.168.1.108: icmp_seq=6 ttl=64 time=16.993 ms
64 bytes from 192.168.1.108: icmp_seq=7 ttl=64 time=11.794 ms
^C
--- home.local ping statistics ---
8 packets transmitted, 8 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 5.847/42.375/100.503/37.988 ms

zealous junco
# crude shard

so I finally decided to look at this and deleting the integration and re adding which relinks its made it work (at least for now) but the error in the log did denote a token refresh problem so maybe re adding has just manually got a new token and the issue will come back when it needs to refresh. if it does then ill have a look at it again. tbh its not really an integration i make a lot of use of so it failing was a low priority for me...