Anyone uses android tablets as wall panel/dashboards here? I'm using a very old 7inch android tablet.. that has only 512Mb of RAM and is very slow.. so I'm looking to get a new cheap tablet..
I have my eyes lenovo tab m10 hd.. it has 2GB RAM.. snapdragon 400 series processor.. wonder if this would be enough hardware for the purpose.
#Android tablet recommendations for using as a dashboard.
1 messages · Page 1 of 1 (latest)
it's a bit on the edge, as long as android is supported on that tab (unless you unlocked it with bootloader etc.) it will work. Personally i run a Lenovo m10 3d gen tab running fully kiosk Tab/HA. The problem is that, unless you unlock it, you would have a brick when os is no longer supported.
my current 7inch tab is running android 5.. m10 I think has android 9.. it should be good for years to come I guess.
What are the specs for your m10 3rd gen tab BTW?
Pls google specs, dont know right know
I don't want to know everything just ram and all..
4gb
technically your tab also has outdated android version.. there no more security patches and all for that.
The version history of the Android mobile operating system began with the public release of its first beta on November 5, 2007. The first commercial version, Android 1.0, was released on September 23, 2008. The operating system has been developed by Google on a yearly schedule since at least 2011. New major releases are usually announced at Goo...
I got this one, because it comes with a docking/charging stand: https://www.amazon.com/dp/B0DR81VRJM
nope. running android 12 atm. As long as it goes 😉 But if the price is right, it's an ok tablet
I will be wall mounting the tablet so docking stand is of no use to me. Also this tablet brand is not available here.
As you use it as dashboard, the lenovo is fine.
Yes, but will 2GB ram be sufficient?
yes as you dont install haos on it. it runs the normal android os and fully kiosk (or other options) just runs on top of it.
What do you mean? You can install haos on the tablet?
no, you run haos on a dedicated machine and use your tablet with haos companion app and/or fully kiosk installed as apps.
Why you said,
yes as you dont install haos on it
though?
You asked if ram would be enough, i answered with yes because ha is running on diffetent hw and will therefor not affect ram on tablet. Only companion app and/or fully kiosk would use a bit.
Ah! OK, you got me confused for a second there.
Makes sense. I also heard a lot of people say, tablets is a bad choice.. use a proper wall panel displays..
any thoughts on that?
No need
is there any alternative to FKB?
some FOSS option perhaps?
I do wanna protect the battery of the tablet and ability to turn on/off display based on camera motion or something...
Tabs running fine for years, use smartplug and automate charging with battery sensor tablet. Say if batt lvl is 30 pct then charge until 75pct, then turn off charger. Motion detection also possible to turn on display
Hmm.. how would you turn display on with smart plug?
the tab I have my eye on is running android 9.. and doesn't have AFAIK any kind of camera motion thing to turn screen on/off.
Plug is only for charging. You use the motion detection exposed in FK. So if cam detects movement, display on. Works with proximity sensor too
Oh! Hmm..
using the plug only to switch on/off battery charger. the best batt saving thing is to not let it drain completely and not to load it completely.
turning of display with fk is a good thing too
Yes, the tablet I have currently have already had bloated battery once..
wanna avoid that as much as I can.
I hope i have answered all your questions?
I think so.
ok, then you can mark your thread as resolved 😉 good luck setting it all up!
how do I mark it resolved?
Where you select the tags
OK. done.