New HA Green won't boot | Home Assistant | Page 1

leaden cobalt Sep 25, 2025, 3:46 PM

#

Hi everyone,

I received my new Home Assistant Green yesterday.
First, I connected the network cable and then the power supply. I waited to see what happens – but even after more than an hour, https://homeassistant.local:8123 only shows “not reachable.”

Today I connected a monitor to check, and I see this message:

"WARN Home Assistant CLI not starting! Jump into emergency console..."

After that, nothing else happens.

What I already tried:

Reset using the button → no change

Reset via SD card → it’s stuck for about 1.5 hours at
"Wait until kernel time synchronized"

Now I’m not sure: did I do something wrong, or is the device defective?
Any ideas what else I can try?

Thanks in advance!

narrow ibex Sep 25, 2025, 4:38 PM

#

check network and time settings, also take a look at your power supply, you have a low power warning 😉

leaden cobalt Sep 25, 2025, 5:55 PM

#

I‘m using the original power supply in a standard plug so there can’t be a problem with that unless the power supply is broken. I checked the network settings (screenshot attached)

sinful swan Sep 25, 2025, 6:03 PM

#

Without network HAOS cannot create the containers. Are you sure DHCP addresses are provided from whatever you're plugged into?

narrow ibex Sep 25, 2025, 6:27 PM

#

as far as i can see you are not getting an ipv4 address..

#New HA Green won't boot