reef arrow
OTBR stopped connected several months ago after an update and only now have I had a chance to investigate. I've reset, restarted, etc. and followed troubleshooting suggestions and still can't connect. Do I need to uninstall and reinstall? Below are current logs.
Add-on: OpenThread Border Router
OpenThread Border Router add-on
Add-on version: 2.13.0
You are running the latest version of this add-on.
System: Home Assistant OS 16.2 (aarch64 / yellow)
Home Assistant Core: 2025.9.1
Home Assistant Supervisor: 2025.09.0
Please, share the above information when looking for help
or support in, e.g., GitHub, forums or the Discord chat.
s6-rc: info: service banner successfully started
s6-rc: info: service universal-silabs-flasher: starting
[10:08:00] INFO: The selected serial port is not a USB device.
[10:08:00] WARNING: No firmware found for the selected device, assuming firmware is installed.
s6-rc: info: service universal-silabs-flasher successfully started
s6-rc: info: service otbr-agent: starting
[10:08:02] INFO: Setup OTBR firewall...
[10:08:02] INFO: Starting otbr-agent...
[NOTE]-AGENT---: Running 0.3.0-b067e5ac-dirty
[NOTE]-AGENT---: Thread version: 1.3.0
[NOTE]-AGENT---: Thread interface: wpan0
[NOTE]-AGENT---: Radio URL: spinel+hdlc+uart:///dev/ttyAMA1?uart-baudrate=460800&uart-flow-control
[NOTE]-AGENT---: Radio URL: trel://end0
[NOTE]-ILS-----: Infra link selected: end0
49d.18:28:11.013 [W] P-SpinelDrive-: Wait for response timeout
49d.18:28:13.015 [W] P-SpinelDrive-: Wait for response timeout
49d.18:28:15.017 [W] P-SpinelDrive-: Wait for response timeout
49d.18:28:15.017 [C] Platform------: Init()